- 01 7月, 2006 1 次提交
-
-
由 Al Viro 提交于
Allow to tie upper bits of syscall bitmap in audit rules to kernel-defined sets of syscalls. Infrastructure, a couple of classes (with 32bit counterparts for biarch targets) and actual tie-in on i386, amd64 and ia64. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 6月, 2006 5 次提交
-
-
由 Andi Kleen 提交于
- Factor out the duplicated access/cache code into a single file * Shared between i386/x86-64. - Share flush code between AGP and IOMMU * Fix a bug: AGP didn't wait for end of flush before - Drop 8 northbridges limit and allocate dynamically - Add lock to serialize AGP and IOMMU GART flushes - Add PCI ID for next AMD northbridge - Random related cleanups The old K8 NUMA discovery code is unchanged. New systems should all use SRAT for this. Cc: "Navin Boppuri" <navin.boppuri@newisys.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
Implement the time sources for i386 (acpi_pm, cyclone, hpet, pit, and tsc). With this patch, the conversion of the i386 arch to the generic timekeeping code should be complete. The patch should be fairly straight forward, only adding the new clocksources. [hirofumi@mail.parknet.co.jp: acpi_pm cleanup] Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
This converts the i386 arch to use the generic timeofday subsystem. It enabled the GENERIC_TIME option, disables the timer_opts code and other arch specific timekeeping code and reworks the delay code. While this patch enables the generic timekeeping, please note that this patch does not provide any i386 clocksource. Thus only the jiffies clocksource will be available. To get full replacements for the code being disabled here, the timeofday-clocks-i386 patch will needed. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
As part of the i386 conversion to the generic timekeeping infrastructure, this introduces a new tsc.c file. The code in this file replaces the TSC initialization, management and access code currently in timer_tsc.c (which will be removed) that we want to preserve. The code also introduces the following functionality: o tsc_khz: like cpu_khz but stores the TSC frequency on systems that do not change TSC frequency w/ CPU frequency o check/mark_tsc_unstable: accessor/modifier flag for TSC timekeeping usability o minor cleanups to calibration math. This patch also includes a one line __cpuinitdata fix from Zwane Mwaikambo. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 john stultz 提交于
A simple cleanup for the i386 arch in preparation of moving to the generic timeofday infrastructure. It simply moves the PIT initialization code, locks, and other code we want to keep from some code from timer_pit.c (which will be removed) to i8253.c. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 4月, 2006 1 次提交
-
-
由 Bjorn Helgaas 提交于
dmi_scan.c is arch-independent and is used by i386, x86_64, and ia64. Currently all three arches compile it from arch/i386, which means that ia64 and x86_64 depend on things in arch/i386 that they wouldn't otherwise care about. This is simply "mv arch/i386/kernel/dmi_scan.c drivers/firmware/" (removing trailing whitespace) and the associated Makefile changes. All three architectures already set CONFIG_DMI in their top-level Kconfig files. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andrey Panin <pazke@orbita1.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 3月, 2006 1 次提交
-
-
由 Gerd Hoffmann 提交于
Implement SMP alternatives, i.e. switching at runtime between different code versions for UP and SMP. The code can patch both SMP->UP and UP->SMP. The UP->SMP case is useful for CPU hotplug. With CONFIG_CPU_HOTPLUG enabled the code switches to UP at boot time and when the number of CPUs goes down to 1, and switches to SMP when the number of CPUs goes up to 2. Without CONFIG_CPU_HOTPLUG or on non-SMP-capable systems the code is patched once at boot time (if needed) and the tables are released afterwards. The changes in detail: * The current alternatives bits are moved to a separate file, the SMP alternatives code is added there. * The patch adds some new elf sections to the kernel: .smp_altinstructions like .altinstructions, also contains a list of alt_instr structs. .smp_altinstr_replacement like .altinstr_replacement, but also has some space to save original instruction before replaving it. .smp_locks list of pointers to lock prefixes which can be nop'ed out on UP. The first two are used to replace more complex instruction sequences such as spinlocks and semaphores. It would be possible to deal with the lock prefixes with that as well, but by handling them as special case the table sizes become much smaller. * The sections are page-aligned and padded up to page size, so they can be free if they are not needed. * Splitted the code to release init pages to a separate function and use it to release the elf sections if they are unused. Signed-off-by: NGerd Hoffmann <kraxel@suse.de> Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 3月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
ATI chipsets tend to generate double timer interrupts for the local APIC timer when both the 8254 and the IO-APIC timer pins are enabled. This is because they route it to both and the result is anded together and the CPU ends up processing it twice. This patch changes check_timer to disable the 8254 routing for interrupt 0. I think it would be safe on all chipsets actually (i tested it on a couple and it worked everywhere) and Windows seems to do it in a similar way, but to be conservative this patch only enables this mode on ATI (and adds options to enable/disable too) Ported over from a similar x86-64 change. I reused the ACPI earlyquirk infrastructure for the ATI bridge check, but tweaked it a bit to work even without ACPI. Inspired by a patch from Chuck Ebbert, but redone. Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 2月, 2006 1 次提交
-
-
由 Zachary Amsden 提交于
When compiling a non-default subarch, topology.c is missing from the kernel build. This causes builds with CONFIG_HOTPLUG_CPU to fail. In addition, on Intel processors with cpuid level > 4, it causes intel_cacheinfo.c to reference uninitialized data that should have been set up by the initcall in topology.c which calls register_cpu. This causes a kernel panic on boot on newer Intel processors. Moving topology.c to arch/i386/kernel fixes both of these problems. Thanks to Dan Hecht for finding and fixing this problem. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NDan Hecht <dhect@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2006 1 次提交
-
-
由 Vivek Goyal 提交于
- Moving the crash_dump.c file to arch dependent part as kmap_atomic_pfn is specific to i386 and highmem may not exist in other archs. - Use ioremap for x86_64 to map the previous kernel memory. - In copy_oldmem_page(), we now directly copy to the user/kernel buffer and avoid the unneccesary copy to a kmalloc'd page. Signed-off-by: NRachita Kothiyal <rachita@in.ibm.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 1月, 2006 2 次提交
-
-
由 Matt Mackall 提交于
This adds an option to remove vm86 support under CONFIG_EMBEDDED. Saves about 5k. This version eliminates most of the #ifdefs of the previous version and instead uses function stubs in vm86.h. Also, release_vm86_irqs is moved from asm-i386/irq.h to a more appropriate home in vm86.h so that the stubs can live together. $ size vmlinux-baseline vmlinux-novm86 text data bss dec hex filename 2920821 523232 190652 3634705 377611 vmlinux-baseline 2916268 523100 190492 3629860 376324 vmlinux-novm86 Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Mackall 提交于
This adds configurable support for doublefault reporting on x86 add/remove: 0/3 grow/shrink: 0/1 up/down: 0/-13048 (-13048) function old new delta cpu_init 846 786 -60 doublefault_fn 188 - -188 doublefault_stack 4096 - -4096 doublefault_tss 8704 - -8704 Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 1 次提交
-
-
由 Pierre Ossman 提交于
Reset the ISA DMA controller into a known state after a suspend. Primary concern was reenabling the cascading DMA channel (4). Signed-off-by: NPierre Ossman <drzeus@drzeus.cx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 8月, 2005 1 次提交
-
-
由 Len Brown 提交于
it has been a synonym for CONFIG_ACPI since 2.6.12 Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 26 6月, 2005 1 次提交
-
-
由 Eric W. Biederman 提交于
This is the i386 implementation of kexec. Signed-off-by: NEric Biederman <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 6月, 2005 1 次提交
-
-
由 Keith Owens 提交于
arch/i386/kernel/vsyscall-note.o is not listed as a target so its .cmd file is neither considered as a target nor is it read on the next build. This causes vsyscall-note.o to be rebuilt every time that you run make, which causes vmlinux to be rebuilt every time. Signed-off-by: NKeith Owens <kaos@ocs.com.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 1 次提交
-
-
由 Jaya Kumar 提交于
This patch by Jaya Kumar introduces a generic infrastructure to deal with x86 chipsets with nonstandard reset sequences, and adds support for the Geode gx1/cs5530a chipset. Signed-off-by: NJaya Kumar <jayalk@intworks.biz> Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 2 次提交
-
-
由 Roland McGrath 提交于
This patch adds an ELF note to the vDSO giving the LINUX_VERSION_CODE value. Having this in the vDSO lets the dynamic linker avoid the `uname' syscall it now always does at startup to ascertain the kernel ABI available. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-