Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 23 7月, 2013 1 次提交
  3. 11 7月, 2013 2 次提交
  5. 27 6月, 2013 1 次提交
    • N
      net: fix kernel deadlock with interface rename and netdev name retrieval. · 5dbe7c17
      由 Nicolas Schichan 提交于 
      When the kernel (compiled with CONFIG_PREEMPT=n) is performing the
rename of a network interface, it can end up waiting for a workqueue
to complete. If userland is able to invoke a SIOCGIFNAME ioctl or a
SO_BINDTODEVICE getsockopt in between, the kernel will deadlock due to
the fact that read_secklock_begin() will spin forever waiting for the
writer process (the one doing the interface rename) to update the
devnet_rename_seq sequence.

This patch fixes the problem by adding a helper (netdev_get_name())
and using it in the code handling the SIOCGIFNAME ioctl and
SO_BINDTODEVICE setsockopt.

The netdev_get_name() helper uses raw_seqcount_begin() to avoid
spinning forever, waiting for devnet_rename_seq->sequence to become
even. cond_resched() is used in the contended case, before retrying
the access to give the writer process a chance to finish.

The use of raw_seqcount_begin() will incur some unneeded work in the
reader process in the contended case, but this is better than
deadlocking the system.
Signed-off-by: NNicolas Schichan <nschichan@freebox.fr>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5dbe7c17
  7. 26 6月, 2013 1 次提交
    • E
      net: poll/select low latency socket support · 2d48d67f
      由 Eliezer Tamir 提交于 
      select/poll busy-poll support.

Split sysctl value into two separate ones, one for read and one for poll.
updated Documentation/sysctl/net.txt

Add a new poll flag POLL_LL. When this flag is set, sock_poll will call
sk_poll_ll if possible. sock_poll sets this flag in its return value
to indicate to select/poll when a socket that can busy poll is found.

When poll/select have nothing to report, call the low-level
sock_poll again until we are out of time or we find something.

Once the system call finds something, it stops setting POLL_LL, so it can
return the result to the user ASAP.
Signed-off-by: NEliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      2d48d67f
  9. 18 6月, 2013 1 次提交
  11. 11 6月, 2013 1 次提交
  13. 29 5月, 2013 1 次提交
  15. 12 5月, 2013 1 次提交
    • E
      ipv6: do not clear pinet6 field · f77d6021
      由 Eric Dumazet 提交于 
      We have seen multiple NULL dereferences in __inet6_lookup_established()

After analysis, I found that inet6_sk() could be NULL while the
check for sk_family == AF_INET6 was true.

Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP
and TCP stacks.

Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash
table, we no longer can clear pinet6 field.

This patch extends logic used in commit fcbdf09d
("net: fix nulls list corruptions in sk_prot_alloc")

TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method
to make sure we do not clear pinet6 field.

At socket clone phase, we do not really care, as cloning the parent (non
NULL) pinet6 is not adding a fatal race.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f77d6021
  17. 10 4月, 2013 2 次提交
  19. 01 4月, 2013 1 次提交
    • K
      net: add option to enable error queue packets waking select · 7d4c04fc
      由 Keller, Jacob E 提交于 
      Currently, when a socket receives something on the error queue it only wakes up
the socket on select if it is in the "read" list, that is the socket has
something to read. It is useful also to wake the socket if it is in the error
list, which would enable software to wait on error queue packets without waking
up for regular data on the socket. The main use case is for receiving
timestamped transmit packets which return the timestamp to the socket via the
error queue. This enables an application to select on the socket for the error
queue only instead of for the regular traffic.

-v2-
* Added the SO_SELECT_ERR_QUEUE socket option to every architechture specific file
* Modified every socket poll function that checks error queue
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Cc: Jeffrey Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7d4c04fc
  21. 21 3月, 2013 1 次提交
  23. 23 2月, 2013 1 次提交
  25. 19 2月, 2013 2 次提交
  27. 05 2月, 2013 1 次提交
  29. 24 1月, 2013 1 次提交
  31. 17 1月, 2013 1 次提交
    • V
      sk-filter: Add ability to lock a socket filter program · d59577b6
      由 Vincent Bernat 提交于 
      While a privileged program can open a raw socket, attach some
restrictive filter and drop its privileges (or send the socket to an
unprivileged program through some Unix socket), the filter can still
be removed or modified by the unprivileged program. This commit adds a
socket option to lock the filter (SO_LOCK_FILTER) preventing any
modification of a socket filter program.

This is similar to OpenBSD BIOCLOCK ioctl on bpf sockets, except even
root is not allowed change/drop the filter.

The state of the lock can be read with getsockopt(). No error is
triggered if the state is not changed. -EPERM is returned when a user
tries to remove the lock or to change/remove the filter while the lock
is active. The check is done directly in sk_attach_filter() and
sk_detach_filter() and does not affect only setsockopt() syscall.
Signed-off-by: NVincent Bernat <bernat@luffy.cx>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d59577b6
  33. 22 12月, 2012 1 次提交
  35. 27 11月, 2012 1 次提交
    • B
      sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name · c91f6df2
      由 Brian Haley 提交于 
      Instead of having the getsockopt() of SO_BINDTODEVICE return an index, which
will then require another call like if_indextoname() to get the actual interface
name, have it return the name directly.

This also matches the existing man page description on socket(7) which mentions
the argument being an interface name.

If the value has not been set, zero is returned and optlen will be set to zero
to indicate there is no interface name present.

Added a seqlock to protect this code path, and dev_ifname(), from someone
changing the device name via dev_change_name().

v2: Added seqlock protection while copying device name.

v3: Fixed word wrap in patch.
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c91f6df2
  37. 19 11月, 2012 1 次提交
    • E
      net: Allow userns root control of the core of the network stack. · 5e1fccc0
      由 Eric W. Biederman 提交于 
      Allow an unpriviled user who has created a user namespace, and then
created a network namespace to effectively use the new network
namespace, by reducing capable(CAP_NET_ADMIN) and
capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns,
CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls.

Settings that merely control a single network device are allowed.
Either the network device is a logical network device where
restrictions make no difference or the network device is hardware NIC
that has been explicity moved from the initial network namespace.

In general policy and network stack state changes are allowed
while resource control is left unchanged.

Allow ethtool ioctls.

Allow binding to network devices.
Allow setting the socket mark.
Allow setting the socket priority.

Allow setting the network device alias via sysfs.
Allow setting the mtu via sysfs.
Allow changing the network device flags via sysfs.
Allow setting the network device group via sysfs.

Allow the following network device ioctls.
SIOCGMIIPHY
SIOCGMIIREG
SIOCSIFNAME
SIOCSIFFLAGS
SIOCSIFMETRIC
SIOCSIFMTU
SIOCSIFHWADDR
SIOCSIFSLAVE
SIOCADDMULTI
SIOCDELMULTI
SIOCSIFHWBROADCAST
SIOCSMIIREG
SIOCBONDENSLAVE
SIOCBONDRELEASE
SIOCBONDSETHWADDR
SIOCBONDCHANGEACTIVE
SIOCBRADDIF
SIOCBRDELIF
SIOCSHWTSTAMP
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e1fccc0
  39. 01 11月, 2012 1 次提交
    • P
      sk-filter: Add ability to get socket filter program (v2) · a8fc9277
      由 Pavel Emelyanov 提交于 
      The SO_ATTACH_FILTER option is set only. I propose to add the get
ability by using SO_ATTACH_FILTER in getsockopt. To be less
irritating to eyes the SO_GET_FILTER alias to it is declared. This
ability is required by checkpoint-restore project to be able to
save full state of a socket.

There are two issues with getting filter back.

First, kernel modifies the sock_filter->code on filter load, thus in
order to return the filter element back to user we have to decode it
into user-visible constants. Fortunately the modification in question
is interconvertible.

Second, the BPF_S_ALU_DIV_K code modifies the command argument k to
speed up the run-time division by doing kernel_k = reciprocal(user_k).
Bad news is that different user_k may result in same kernel_k, so we
can't get the original user_k back. Good news is that we don't have
to do it. What we need to is calculate a user2_k so, that

  reciprocal(user2_k) == reciprocal(user_k) == kernel_k

i.e. if it's re-loaded back the compiled again value will be exactly
the same as it was. That said, the user2_k can be calculated like this

  user2_k = reciprocal(kernel_k)

with an exception, that if kernel_k == 0, then user2_k == 1.

The optlen argument is treated like this -- when zero, kernel returns
the amount of sock_fprog elements in filter, otherwise it should be
large enough for the sock_fprog array.

changes since v1:
* Declared SO_GET_FILTER in all arch headers
* Added decode of vlan-tag codes
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a8fc9277
  41. 26 10月, 2012 2 次提交
  43. 22 10月, 2012 1 次提交
    • P
      sockopt: Make SO_BINDTODEVICE readable · f7b86bfe
      由 Pavel Emelyanov 提交于 
      The SO_BINDTODEVICE option is the only SOL_SOCKET one that can be set, but
cannot be get via sockopt API. The only way we can find the device id a
socket is bound to is via sock-diag interface. But the diag works only on
hashed sockets, while the opt in question can be set for yet unhashed one.

That said, in order to know what device a socket is bound to (we do want
to know this in checkpoint-restore project) I propose to make this option
getsockopt-able and report the respective device index.

Another solution to the problem might be to teach the sock-diag reporting
info on unhashed sockets. Should I go this way instead?
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f7b86bfe
  45. 28 9月, 2012 1 次提交
  47. 25 9月, 2012 2 次提交
    • E
      net: guard tcp_set_keepalive() to tcp sockets · 3e10986d
      由 Eric Dumazet 提交于 
      Its possible to use RAW sockets to get a crash in
tcp_set_keepalive() / sk_reset_timer()

Fix is to make sure socket is a SOCK_STREAM one.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3e10986d
    • E
      net: use a per task frag allocator · 5640f768
      由 Eric Dumazet 提交于 
      We currently use a per socket order-0 page cache for tcp_sendmsg()
operations.

This page is used to build fragments for skbs.

Its done to increase probability of coalescing small write() into
single segments in skbs still in write queue (not yet sent)

But it wastes a lot of memory for applications handling many mostly
idle sockets, since each socket holds one page in sk->sk_sndmsg_page

Its also quite inefficient to build TSO 64KB packets, because we need
about 16 pages per skb on arches where PAGE_SIZE = 4096, so we hit
page allocator more than wanted.

This patch adds a per task frag allocator and uses bigger pages,
if available. An automatic fallback is done in case of memory pressure.

(up to 32768 bytes per frag, thats order-3 pages on x86)

This increases TCP stream performance by 20% on loopback device,
but also benefits on other network devices, since 8x less frags are
mapped on transmit and unmapped on tx completion. Alexander Duyck
mentioned a probable performance win on systems with IOMMU enabled.

Its possible some SG enabled hardware cant cope with bigger fragments,
but their ndo_start_xmit() should already handle this, splitting a
fragment in sub fragments, since some arches have PAGE_SIZE=65536

Successfully tested on various ethernet devices.
(ixgbe, igb, bnx2x, tg3, mellanox mlx4)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Cc: Vijay Subramanian <subramanian.vijay@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NVijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5640f768
  49. 15 9月, 2012 3 次提交
    • D
      cgroup: Assign subsystem IDs during compile time · 8a8e04df
      由 Daniel Wagner 提交于 
      WARNING: With this change it is impossible to load external built
controllers anymore.

In case where CONFIG_NETPRIO_CGROUP=m and CONFIG_NET_CLS_CGROUP=m is
set, corresponding subsys_id should also be a constant. Up to now,
net_prio_subsys_id and net_cls_subsys_id would be of the type int and
the value would be assigned during runtime.

By switching the macro definition IS_SUBSYS_ENABLED from IS_BUILTIN
to IS_ENABLED, all *_subsys_id will have constant value. That means we
need to remove all the code which assumes a value can be assigned to
net_prio_subsys_id and net_cls_subsys_id.

A close look is necessary on the RCU part which was introduces by
following patch:

  commit f8451725
  Author:	Herbert Xu <herbert@gondor.apana.org.au>  Mon May 24 09:12:34 2010
  Committer:	David S. Miller <davem@davemloft.net>  Mon May 24 09:12:34 2010

  cls_cgroup: Store classid in struct sock

  Tis code was added to init_cgroup_cls()

	  /* We can't use rcu_assign_pointer because this is an int. */
	  smp_wmb();
	  net_cls_subsys_id = net_cls_subsys.subsys_id;

  respectively to exit_cgroup_cls()

	  net_cls_subsys_id = -1;
	  synchronize_rcu();

  and in module version of task_cls_classid()

	  rcu_read_lock();
	  id = rcu_dereference(net_cls_subsys_id);
	  if (id >= 0)
		  classid = container_of(task_subsys_state(p, id),
					 struct cgroup_cls_state, css)->classid;
	  rcu_read_unlock();

Without an explicit explaination why the RCU part is needed. (The
rcu_deference was fixed by exchanging it to rcu_derefence_index_check()
in a later commit, but that is a minor detail.)

So here is my pondering why it was introduced and why it safe to
remove it now. Note that this code was copied over to net_prio the
reasoning holds for that subsystem too.

The idea behind the RCU use for net_cls_subsys_id is to make sure we
get a valid pointer back from task_subsys_state(). task_subsys_state()
is just blindly accessing the subsys array and returning the
pointer. Obviously, passing in -1 as id into task_subsys_state()
returns an invalid value (out of lower bound).

So this code makes sure that only after module is loaded and the
subsystem registered, the id is assigned.

Before unregistering the module all old readers must have left the
critical section. This is done by assigning -1 to the id and issuing a
synchronized_rcu(). Any new readers wont call task_subsys_state()
anymore and therefore it is safe to unregister the subsystem.

The new code relies on the same trick, but it looks at the subsys
pointer return by task_subsys_state() (remember the id is constant
and therefore we allways have a valid index into the subsys
array).

No precautions need to be taken during module loading
module. Eventually, all CPUs will get a valid pointer back from
task_subsys_state() because rebind_subsystem() which is called after
the module init() function will assigned subsys[net_cls_subsys_id] the
newly loaded module subsystem pointer.

When the subsystem is about to be removed, rebind_subsystem() will
called before the module exit() function. In this case,
rebind_subsys() will assign subsys[net_cls_subsys_id] a NULL pointer
and then it calls synchronize_rcu(). All old readers have left by then
the critical section. Any new reader wont access the subsystem
anymore.  At this point we are safe to unregister the subsystem. No
synchronize_rcu() call is needed.
Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: netdev@vger.kernel.org
Cc: cgroups@vger.kernel.org
      8a8e04df
    • D
      cgroup: net_prio: Do not define task_netpioidx() when not selected · 51e4e7fa
      由 Daniel Wagner 提交于 
      task_netprioidx() should not be defined in case the configuration is
CONFIG_NETPRIO_CGROUP=n. The reason is that in a following patch the
net_prio_subsys_id will only be defined if CONFIG_NETPRIO_CGROUP!=n.
When net_prio is not built at all any callee should only get an empty
task_netprioidx() without any references to net_prio_subsys_id.
Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: netdev@vger.kernel.org
Cc: cgroups@vger.kernel.org
      51e4e7fa
    • D
      cgroup: net_cls: Do not define task_cls_classid() when not selected · 8fb974c9
      由 Daniel Wagner 提交于 
      task_cls_classid() should not be defined in case the configuration is
CONFIG_NET_CLS_CGROUP=n. The reason is that in a following patch the
net_cls_subsys_id will only be defined if CONFIG_NET_CLS_CGROUP!=n.
When net_cls is not built at all a callee should only get an empty
task_cls_classid() without any references to net_cls_subsys_id.
Signed-off-by: NDaniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NLi Zefan <lizefan@huawei.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: netdev@vger.kernel.org
Cc: cgroups@vger.kernel.org
      8fb974c9
  51. 11 9月, 2012 1 次提交
  53. 04 9月, 2012 1 次提交
  55. 25 8月, 2012 1 次提交
    • N
      cls_cgroup: Allow classifier cgroups to have their classid reset to 0 · 3afa6d00
      由 Neil Horman 提交于 
      The network classifier cgroup initalizes each cgroups instance classid value to
0.  However, the sock_update_classid function only updates classid's in sockets
if the tasks cgroup classid is not zero, and if it differs from the current
classid.  The later check is to prevent cache line dirtying, but the former is
detrimental, as it prevents resetting a classid for a cgroup to 0.  While this
is not a common action, it has administrative usefulness (if the admin wants to
disable classification of a certain group temporarily for instance).

Easy fix, just remove the zero check.  Tested successfully by myself
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3afa6d00
  57. 15 8月, 2012 2 次提交
  59. 02 8月, 2012 1 次提交
  61. 01 8月, 2012 2 次提交
    • M
      netvm: prevent a stream-specific deadlock · c76562b6
      由 Mel Gorman 提交于 
      This patch series is based on top of "Swap-over-NBD without deadlocking
v15" as it depends on the same reservation of PF_MEMALLOC reserves logic.

When a user or administrator requires swap for their application, they
create a swap partition and file, format it with mkswap and activate it
with swapon.  In diskless systems this is not an option so if swap if
required then swapping over the network is considered.  The two likely
scenarios are when blade servers are used as part of a cluster where the
form factor or maintenance costs do not allow the use of disks and thin
clients.

The Linux Terminal Server Project recommends the use of the Network Block
Device (NBD) for swap but this is not always an option.  There is no
guarantee that the network attached storage (NAS) device is running Linux
or supports NBD.  However, it is likely that it supports NFS so there are
users that want support for swapping over NFS despite any performance
concern.  Some distributions currently carry patches that support swapping
over NFS but it would be preferable to support it in the mainline kernel.

Patch 1 avoids a stream-specific deadlock that potentially affects TCP.

Patch 2 is a small modification to SELinux to avoid using PFMEMALLOC
	reserves.

Patch 3 adds three helpers for filesystems to handle swap cache pages.
	For example, page_file_mapping() returns page->mapping for
	file-backed pages and the address_space of the underlying
	swap file for swap cache pages.

Patch 4 adds two address_space_operations to allow a filesystem
	to pin all metadata relevant to a swapfile in memory. Upon
	successful activation, the swapfile is marked SWP_FILE and
	the address space operation ->direct_IO is used for writing
	and ->readpage for reading in swap pages.

Patch 5 notes that patch 3 is bolting
	filesystem-specific-swapfile-support onto the side and that
	the default handlers have different information to what
	is available to the filesystem. This patch refactors the
	code so that there are generic handlers for each of the new
	address_space operations.

Patch 6 adds an API to allow a vector of kernel addresses to be
	translated to struct pages and pinned for IO.

Patch 7 adds support for using highmem pages for swap by kmapping
	the pages before calling the direct_IO handler.

Patch 8 updates NFS to use the helpers from patch 3 where necessary.

Patch 9 avoids setting PF_private on PG_swapcache pages within NFS.

Patch 10 implements the new swapfile-related address_space operations
	for NFS and teaches the direct IO handler how to manage
	kernel addresses.

Patch 11 prevents page allocator recursions in NFS by using GFP_NOIO
	where appropriate.

Patch 12 fixes a NULL pointer dereference that occurs when using
	swap-over-NFS.

With the patches applied, it is possible to mount a swapfile that is on an
NFS filesystem.  Swap performance is not great with a swap stress test
taking roughly twice as long to complete than if the swap device was
backed by NBD.

This patch: netvm: prevent a stream-specific deadlock

It could happen that all !SOCK_MEMALLOC sockets have buffered so much data
that we're over the global rmem limit.  This will prevent SOCK_MEMALLOC
buffers from receiving data, which will prevent userspace from running,
which is needed to reduce the buffered data.

Fix this by exempting the SOCK_MEMALLOC sockets from the rmem limit.  Once
this change it applied, it is important that sockets that set
SOCK_MEMALLOC do not clear the flag until the socket is being torn down.
If this happens, a warning is generated and the tokens reclaimed to avoid
accounting errors until the bug is fixed.

[davem@davemloft.net: Warning about clearing SOCK_MEMALLOC]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c76562b6
    • M
      netvm: set PF_MEMALLOC as appropriate during SKB processing · b4b9e355
      由 Mel Gorman 提交于 
      In order to make sure pfmemalloc packets receive all memory needed to
proceed, ensure processing of pfmemalloc SKBs happens under PF_MEMALLOC.
This is limited to a subset of protocols that are expected to be used for
writing to swap.  Taps are not allowed to use PF_MEMALLOC as these are
expected to communicate with userspace processes which could be paged out.

[a.p.zijlstra@chello.nl: Ideas taken from various patches]
[jslaby@suse.cz: Lock imbalance fix]
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b4b9e355