5700 and 5701 will not return correct SRAM data when the chip is in
D3hot power state. tg3_get_eeprom_hw_cfg() must first put the device
in D0 before reading SRAM.

Thanks to Thomas Chenault at Dell for noticing this problem.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allows dte facility patch to use 32 64 bit ioctl conversion mechanism
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allows use of the optional user facility to insert ITU-T
(http://www.itu.int/ITU-T/) specified DTE facilities in call set-up x25
packets.  This feature is optional; no facilities will be added if the ioctl
is not used, and call setup packet remains the same as before.

If the ioctls provided by the patch are used, then a facility marker will be
added to the x25 packet header so that the called dte address extension
facility can be differentiated from other types of facilities (as described in
the ITU-T X.25 recommendation) that are also allowed in the x25 packet header.

Facility markers are made up of two octets, and may be present in the x25
packet headers of call-request, incoming call, call accepted, clear request,
and clear indication packets.  The first of the two octets represents the
facility code field and is set to zero by this patch.  The second octet of the
marker represents the facility parameter field and is set to 0x0F because the
marker will be inserted before ITU-T type DTE facilities.

Since according to ITU-T X.25 Recommendation X.25(10/96)- 7.1 "All networks
will support the facility markers with a facility parameter field set to all
ones or to 00001111", therefore this patch should work with all x.25 networks.

While there are many ITU-T DTE facilities, this patch implements only the
called and calling address extension, with placeholders in the
x25_dte_facilities structure for the rest of the facilities.

Testing:

This patch was tested using a cisco xot router connected on its serial ports
to an X.25 network, and on its lan ports to a host running an xotd daemon.

It is also possible to test this patch using an xotd daemon and an x25tap
patch, where the xotd daemons work back-to-back without actually using an x.25
network.  See www.fyonne.net for details on how to do this.
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NAndrew Hendry <ahendry@tusc.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following error from kernel
T2 kernel: schedule_timeout:
wrong timeout value ffffffffffffffff from ffffffff88164796
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To allow 32 bit x25 module structures to be passed to a 64 bit kernel via
ioctl using the new compat_sock_ioctl registration mechanism instead of the
obsolete 'register_ioctl32_conversion into hash table' mechanism
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Get socket timestamp handler function that does not use the
ioctl32_hash_table.
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the register_ioctl32_conversion() patch in the kernel is now obsolete,
provide another method to allow 32 bit user space ioctls to reach the kernel.
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return negative error constant.
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64-SGI] SN2-XP reduce kmalloc wrapper inlining
  [IA64] MCA: remove obsolete ifdef
  [IA64] MCA: update MCA comm field for user space tasks
  [IA64] MCA: print messages in MCA handler
  [IA64-SGI] - Eliminate SN pio_phys_xxx macros. Move to assembly
  [IA64] use icc defined constant
  [IA64] add __builtin_trap definition for icc build
  [IA64] clean up asm/intel_intrin.h
  [IA64] map ia64_hint definition to intel compiler intrinsic
  [IA64] hooks to wait for mmio writes to drain when migrating processes
  [IA64-SGI] driver bugfixes and hardware workarounds for CE1.0 asic
  [IA64-SGI] Handle SC env. powerdown events
  [IA64] Delete MCA/INIT sigdelayed code
  [IA64-SGI] sem2mutex ioc4.c
  [IA64] implement ia64 specific mutex primitives
  [IA64] Fix UP build with BSP removal support.
  [IA64] support for cpu0 removal

This reverts commit 08f1d0b9

The "bt8xx/ conversion" for drivers/video/ hasn't actually percolated
all the way to this tree, so the Makefile change escaped too soon.

Build breakage noticed by Jeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- undo some Lindent damage by indenting member names
- remove history at top of .c file, this is stored in the kernel
  repo changelog (in greater detail, even).

drivers/net/skfp/fplustm.c: In function `enable_formac':
drivers/net/skfp/fplustm.c:552: warning: large integer implicitly truncated to unsigned type
drivers/net/skfp/fplustm.c:555: warning: large integer implicitly truncated to unsigned type

These arguments were changed to `const', so the compiler can now see that it's
doing and outw(..., 0xffffnnnn).  Cast the arg to ushort.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

All accessor's different methods are now selected with C code and unused
ones statically optimized away at compile time instead of being selected
with #if's and #ifdef's.  This has many advantages such as allowing the
compiler to validate the syntax of the whole code, making it cleaner and
easier to understand, and ultimately allowing people to define
configuration symbols in terms of variables if they really want to
dynamically support multiple bus configurations at the same time (with
the unavoidable performance cost).
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Boards with multiple PHYs were not being handled properly by the pcnet32
driver.  This patch by Thomas Bogendoerfer with changes by me will allow
Allied Telesyn 2700FTX and 2701FTX boards to use either the copper or
the fiber interfaces.  It has been tested on ia32 and ppc64 hardware.
Philippe Seewer also tested and improved the patch.
ethtool for pcnet32 already supports multiple phys.

See also bugzilla bug 4219.

Please apply to 2.6.16
Signed-off-by: NDon Fry <brazilnut@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Set version to 1.1
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The hardware has additional error trap interrupt bits.  I have never seen
them trigger, but if they do, it looks like this might be useful.
Signed-off-by: NStephen Hemminger <shemminger@osdl.rog>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch decodes state and revovers from any races in the transmit
timeout and NAPI logic. It should never trigger, but if it does then
do the right thing.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Small whitespace fixes.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add MSI support to sky2 driver.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Change default coalescing parameters slightly, and allow wider
range of values.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Redo the interupt handling of sky2 driver based on the IRQ mangement
documentation. All interrupts are handled by the device0 NAPI poll
routine.

Don't need to adjust interrupt mask in IRQ context, done only when
changing device under RTNL. Therefore don't need hwlock anymore.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove wake on lan support for now. It doesn't work right, and I
don't have a machine with working suspend/resume to test or fix it.
It will be re-enabled later.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The Yukon EC/rev0 (A1) chipset requires a bunch of workarounds. I copied these
from sk98lin.  But since they never got tested and add more cruft to the code;
any attempt at using driver as is on this version will probably fail.

It looks like this was a early engineering sample chip revision, if it ever shows
up on a real system. Produce an error message.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When I/O is non-cache-coherent, we need to ensure that the I/O buffers
we use don't share cache lines with other data.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Update version number
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When a PCI error occurs, try and report more info.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Reformat some code to make it easier to read. And whitespace
fixes.
Signed-off-by: NStephen Hemminger <sheminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add mmio barriers at the appropriate places, don't have a platform
that needs them, but this is where the documentation of the patch
says to add them.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Use kcalloc when allocating ring data structure.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Cleanup of the part of the code that sets up DMA configuration.
Should cause no real change in operation, just clearer.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The SysKonnect Genesis and Yukon chip sets have restrictions on the possible
control block area.  The memory needs to not cross 4 Gig boundary, and it needs
to be 8 byte aligned.  This patch checks and fails to bring the device up
if region is unacceptable.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Improve performance of skge driver by not touching irq mask
register as much. Since the interrupt source auto-masks, the driver
can just leave it disabled until the end of the soft irq.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Cleanup transmit buffers using NAPI.  This allows the transmit routine
to leave interrupts enabled, and that improves performance.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] aes: Fixed array boundary violation
  [CRYPTO] tcrypt: Fix key alignment
  [CRYPTO] all: Add missing cra_alignmask
  [CRYPTO] all: Use kzalloc where possible
  [CRYPTO] api: Align tfm context as wide as possible
  [CRYPTO] twofish: Use rol32/ror32 where appropriate

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (235 commits)
  [NETFILTER]: Add H.323 conntrack/NAT helper
  [TG3]: Don't mark tg3_test_registers() as returning const.
  [IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2
  [IPV6]: Nearly complete kzalloc cleanup for net/ipv6
  [IPV6]: Cleanup of net/ipv6/reassambly.c
  [BRIDGE]: Remove duplicate const from is_link_local() argument type.
  [DECNET]: net/decnet/dn_route.c: fix inconsequent NULL checking
  [TG3]: make drivers/net/tg3.c:tg3_request_irq() static
  [BRIDGE]: use LLC to send STP
  [LLC]: llc_mac_hdr_init const arguments
  [BRIDGE]: allow show/store of group multicast address
  [BRIDGE]: use llc for receiving STP packets
  [BRIDGE]: stp timer to jiffies cleanup
  [BRIDGE]: forwarding remove unneeded preempt and bh diasables
  [BRIDGE]: netfilter inline cleanup
  [BRIDGE]: netfilter VLAN macro cleanup
  [BRIDGE]: netfilter dont use __constant_htons
  [BRIDGE]: netfilter whitespace
  [BRIDGE]: optimize frame pass up
  [BRIDGE]: use kzalloc
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (81 commits)
  [PATCH] USB: omninet: fix up debugging comments
  [PATCH] USB serial: add navman driver
  [PATCH] USB: Fix irda-usb use after use
  [PATCH] USB: rtl8150 small fix
  [PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor ids
  [PATCH] USB: cp2101: add new device IDs
  [PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESS
  [PATCH] USB: vicam.c: fix a NULL pointer dereference
  [PATCH] USB: ZC0301 driver bugfix
  [PATCH] USB: add support for Creativelabs Silvercrest USB keyboard
  [PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card Reader
  [PATCH] USB: storage: unusual_devs.h entry 0420:0001
  [PATCH] USB: storage: another unusual_devs.h entry
  [PATCH] USB: storage: sandisk unusual_devices entry
  [PATCH] USB: fix initdata issue in isp116x-hcd
  [PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference)
  [PATCH] USB: usbcore: Don't assume a USB configuration includes any interfaces
  [PATCH] USB: ub 03 drop stall clearing
  [PATCH] USB: ub 02 remove diag
  [PATCH] USB: ub 01 remove first_open
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (23 commits)
  [PATCH] sysfs: fix a kobject leak in sysfs_add_link on the error path
  [PATCH] sysfs: don't export dir symbols
  [PATCH] get_cpu_sysdev() signedness fix
  [PATCH] kobject_add_dir
  [PATCH] debugfs: Add debugfs_create_blob() helper for exporting binary data
  [PATCH] sysfs: fix problem with duplicate sysfs directories and files
  [PATCH] Kobject: kobject.h: fix a typo
  [PATCH] Kobject: provide better warning messages when people do stupid things
  [PATCH] Driver core: add macros notice(), dev_notice()
  [PATCH] firmware: fix BUG: in fw_realloc_buffer
  [PATCH] sysfs: kzalloc conversion
  [PATCH] fix module sysfs files reference counting
  [PATCH] add EXPORT_SYMBOL_GPL_FUTURE() to USB subsystem
  [PATCH] add EXPORT_SYMBOL_GPL_FUTURE() to RCU subsystem
  [PATCH] add EXPORT_SYMBOL_GPL_FUTURE()
  [PATCH] Clean up module.c symbol searching logic
  [PATCH] kobj_map semaphore to mutex conversion
  [PATCH] kref: avoid an atomic operation in kref_put()
  [PATCH] handle errors returned by platform_get_irq*()
  [PATCH] driver core: platform_get_irq*(): return -ENXIO on error
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  README: bzip2 is not new
  Documentation/Changes: remove outdated translation references
  remove dead Radeon URL
  SCSI_AACRAID: add a help text
  update the i386 defconfig
  MAINTAINERS: remove the LANMEDIA entry
  Move ip2.c and ip2main.c to drivers/char/ip2/ where the other files