CONFIG_LOPEC and CONFIG_SANDPOINT config options are gone.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove reference to the removed old-style kernel parameter.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Some rotating disks also present themselves as CFA devices.
Reported-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Minor cleanup.
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Shawn Lin <shawn@dmp.com.tw>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Vortex86SX with IDE controller revision 0x11 ultra DMA must be
disabled. This patch was tested by DMP and seems to work.

It is a cleaned up version of their older Kernel patch: 
 http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gzTested-by: NShawn Lin <shawn@dmp.com.tw>
Signed-off-by: NBrandon Philips <bphilips@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

commit 54cc1428 ("ide: remove
local_irq_set() macro") accidentally replaced local_save_flags()
by local_irq_set() in ide_probe_port() and __ide_wait_stat()
which resulted in LOCKDEP breakage.
Reported-by: NLarry Finger <Larry.Finger@lwfinger.net>
Tested-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Make consistent use of scc_dma_sff_read_status() throughout the driver.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Factor out ide_dma_sff_write_status(), symmetric to ide_dma_sff_read_status().
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Move apparently misplaced read_sff_dma_status() method from 'struct ide_tp_ops'
to 'struct ide_dma_ops', renaming it to dma_sff_read_status() and making only
required for SFF-8038i compatible IDE controller drivers (greatly cutting down
the number of initializers) as its only user (outside ide-dma-sff.c and such
drivers) appears to be ide_pci_check_simplex() which is only called for such
controllers...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Replace setting of 'hwif->dma_ops' in the 'alim15x3' and 'palm_bk3710' drivers'
init_dma() methods with initializing the corresponding member of their 'struct
ide_port_info' instances and remove such setting from the 'hpt366' driver that
just doesn't use 'sff_dma_ops'. Along with some code save, this prepares us for
the next patch...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Support for the IT8172 IDE controller was removed from the kernel
sometime after 2.6.18.  Support for the only boards that used the IT8172
was removed from the kernel after 2.6.18, as they had never compiled
since 2.6.0.  However, there are a couple of platforms that use this
chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer
in production, and the Linksys NSS4000 Network Attached Storage box,
which is based on the Xiao Hu board.  I am attempting to add support
for the Xiao Hu to the kernel, and this IT8172 IDE controller is the
first bit of code in this effort.

This patch resurrects the IT8172 IDE controller code.  I began with
the 2.6.18 version of the it8172.c file, and have moved it forward so
that it works with the latest version of the kernel.  I have run this
driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and
I have had no problems with it in my configuration.  The attached patch
applies cleanly against 2.6.28.
Signed-off-by: NShane McDonald <mcdonald.shane@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: alan@lxorguk.ukuu.org.uk
[bart: s/HWIF(drive)/drive->hwif/]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Allows UDMA > 33 on ACER TM290 and ACER Aspire 1694WLMi.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This makes ide_port_scan()'s behavior match ide_host_register()'s
one and fixes OOPS in elv_may_queue() during port re-scan.
Reported-and-tested-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* ->cur_dev should now be always valid if ->handler is set so
  remove redundant checks from ide_intr() and ide_timer_expiry().

* Apply CodingStyle fixups in ide_timer_expiry() while at it.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If ->handler is set while it shouldn't be it indicates deep problems
so BUG_ON()-ning and preventing further damage is much more appropriate
than merely printing an error message.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... and remove no longer needed cdrom_start_packet_command and
cdrom_transfer_packet_command.

Tested lightly with ide-cd and ide-floppy.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

as it is done for all other IDE ATAPI devices.

There should be no functionality change resulting from this patch.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

... instead of assuming it is set for accelerated DRQ type devices.
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

According the documentation, id[ATA_ID_DWORD_IO] is non-zero if
the drive supports dword IO, while the code disables support by
setting IDE_DFLAG_NO_IO_32BIT. In addition, this word has been
reused by the ATA8 specification. This patch fixes both cases.
Signed-off-by: NMario Schwalbe <schwalbe@inf.tu-dresden.de>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove id[ATA_ID_DWORD_IO] check altogether per Sergei's suggestion]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_port_for_each_dev() / ide_host_for_each_port() iterators
and update IDE code to use them.

While at it:
- s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(),
  ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(),
  ide_acpi_set_state() and scc_dma_end()
- s/d/i/ variable in ide_proc_port_register_devices()

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Allocate device structures dynamically instead of having them embedded
in ide_hwif_t:

* Remove needless zeroing of port structure from ide_init_port_data().

* Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices).

* Add ide_port_{alloc,free}_devices() helpers and use them respectively
  in ide_{host,free}_alloc().

* Convert all users of ->drives[] to use ->devices[] instead.

While at it:

* Use drive->dn for the slave device check in scc_pata.c.

As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting
code size:

   text    data     bss     dec     hex filename
  53963    1244     237   55444    d894 drivers/ide/ide-core.o.before
  52981    1244     237   54462    d4be drivers/ide/ide-core.o.after
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

kzalloc() -> kzalloc_node() in ide_host_alloc().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Because presence of the peer device was not checked in
it821x_set_pio_mode() PIO0 mode was used for taskfile PIO
in single device configurations.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove (now superfluous) ->error method from struct ide_driver.

* Unexport __ide_error() and make it static.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While at it:
- s/struct ide_driver_s/struct ide_driver/
- use to_ide_driver() macro in ide-proc.c
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove needless parens while at it.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move IDE_DEFAULT_MAX_FAILURES to <linux/ide.h>.

* Move ide_cfg_mtx, ide_hwif_to_major[], ide_port_init_devices_data(),
  ide_init_port_data(), ide_init_port_hw() and ide_unregister() to
  ide-probe.c from ide.c.

* Make ide_unregister(), ide_init_port_data(), ide_init_port_hw()
  and ide_cfg_mtx static.

While at it:

* Remove stale ide_init_port_data() documentation and ide_lock extern.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Merge ide_hwgroup_t with ide_hwif_t.

* Cleanup init_irq() accordingly, then remove no longer needed
  ide_remove_port_from_hwgroup() and ide_ports[].

* Remove now unused HWGROUP() macro.

While at it:

* ide_dump_ata_error() fixups

v2:
* Fix ->quirk_list check in do_ide_request()
  (s/hwif->cur_dev/prev_port->cur_dev).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add ->host_busy field to struct ide_host and use it's first bit
  together with lock bitops to provide new ports serialization method.

* Convert core IDE code to use new ide_[un]lock_host() helpers.

  This removes the need for taking hwgroup->lock if host is already
  busy on serialized hosts and makes it possible to merge ide_hwgroup_t
  into ide_hwif_t (done in the later patch).

* Remove no longer needed ide_hwgroup_t.busy and ide_[un]lock_hwgroup().

* Update do_ide_request() documentation.

v2:
* ide_release_lock() should be called inside IDE_HFLAG_SERIALIZE check.

* Add ide_hwif_t.busy flag and ide_[un]lock_port() for serializing
  devices on a port.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'int port_count' field to ide_hwgroup_t to keep the track
  of the number of ports in the hwgroup.  Then update init_irq()
  and ide_remove_port_from_hwgroup() to use it.

* Remove no longer needed hwgroup->hwif, {drive,hwif}->next,
  ide_add_drive_to_hwgroup() and ide_remove_drive_from_hwgroup()
  (hwgroup->drive now only denotes the currently active device
   in the hwgroup).

* Update locking documentation in <linux/ide.h>.

While at it:

* Rename ->drive field in ide_hwgroup_t to ->cur_dev.

* Use __func__ in ide_timer_expiry().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>