If an o32 process generates a core dump on a 64 bit kernel, the core file
will not be correctly recognized. This is because ELF_CORE_COPY_REGS and
ELF_CORE_COPY_TASK_REGS are not correctly defined for o32 and will use
the default register set which would be CONFIG_64BIT in asm/elf.h.

So we'll switch to use the right register defines in this situation by
checking for WANT_COMPAT_REG_H and use the right defines of
ELF_CORE_COPY_REGS and ELF_CORE_COPY_TASK_REGS.

[Ralf: made ELF_CORE_COPY_TASK_REGS() bullet-proof against funny arguments.]
Signed-off-by: NYong Zhang <yong.zhang@windriver.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The current ssb irq setup in ssb_mipscore_init has the problem that it
configures some device on some irq without checking that the irq is not
taken by an other device.

For example in my case PCI host is on irq 0 and IPSEC on irq 3.
The current code:
  - store in dev->irq that IPSEC irq is 3 + 2
  - do a set_irq 0->3 on PCI host

But now IPSEC irq is not routed anymore to the mips code and dev->irq is
wrong.  This causes a problem described in [1].

This patch tries to solve the problem by making set_irq configure the
device we want to take the irq on the shared irq0. The previous example
becomes:
  - store in dev->irq that IPSEC irq is 3 + 2
  - do a set_irq 0->3 on PCI host:
  - irq 3 is already taken by IPSEC. do a set_irq 3->0 on IPSEC

I also added some code to print the irq configuration after irq setup to
allow easier debugging. And I add extra checking in ssb_mips_irq to report
device without irq or device with not routed irq.

[1] http://www.danm.de/files/src/bcm5365p/REPORTED_DEVICESSigned-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Acked-by : Michael Buesch <mb@bu3sch.de>
Tested-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This revises the sync-4k so it will boot and operate since the removal of
expirelo from the timer code.
Signed-off-by: NTim Anderson <tanderson@mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This is to move the gcmp_probe call to before the use of and selection of
the smp_ops functions. This allows malta with 1004K to work.
Signed-off-by: NTim Anderson <tanderson@mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Most of the CMP support was added before, this mostly correct compile
problems but adds a platform specific translation for the interrupt number
based on cpu number.
Signed-off-by: NTim Anderson <tanderson@mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This takes the current IPI interrupt assignment from the fix number of 4
to the number of CPUs defined in the system.
Signed-off-by: NTim Anderson <tanderson@mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch extends the GIC interrupt handling beyond the current 32 bit
range as well as extending the number of interrupts based on the number
of CPUs.
Signed-off-by: NTim Anderson <tanderson@mvista.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Some CPUs implement mipsr2, but because they are a super-set of mips64r2 do
not define CONFIG_CPU_MIPS64_R2.  Cavium OCTEON falls into this category.
We would still like to use the optimized implementation, so since we have
already checked for CONFIG_CPU_MIPSR2, checking for CONFIG_64BIT instead of
CONFIG_CPU_MIPS64_R2 is sufficient.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NYoichi Yuasa <yyuasa@linux.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[Ralf: I fixed up the numbering in the comment in scall64-n32.S.]
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds support for the Texas Instruments AR7 System-on-a-Chip.
It supports the TNETD7100, 7200 and 7300 versions of the SoC.
Signed-off-by: NMatteo Croce <matteo@openwrt.org>
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NEugene Konev <ejka@openwrt.org>
Signed-off-by: NNicolas Thill <nico@openwrt.org>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

fix hang with HIGHMEM_64G and 32bit resource.  According to hpa and
Linus, use (resource_size_t)-1 to fend off big ranges.

Analyzed by hpa
Reported-and-tested-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These macros had two bugs:
 - the type of the mask was not correctly expanded to the full size of
   the argument being expanded, resulting in possible loss of high bits
   when mixing types.
 - the alignment argument was evaluated twice, despite the macro looking
   like a fancy function (but it really does need to be a macro, since
   it works on arbitrary integer types)

Noticed by Peter Anvin, and with a fix that is a modification of his
suggestion (bug noticed by Yinghai Lu).

Cc: Peter Anvin <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add basic performance counter support to the FRV arch.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Implement atomic64_t and its ops for FRV.  Tested with the following patch:

	diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
	index 55e4fab..086d50d 100644
	--- a/arch/frv/kernel/setup.c
	+++ b/arch/frv/kernel/setup.c
	@@ -746,6 +746,52 @@ static void __init parse_cmdline_early(char *cmdline)

	 } /* end parse_cmdline_early() */

	+static atomic64_t xxx;
	+
	+static void test_atomic64(void)
	+{
	+	atomic64_set(&xxx, 0x12300000023LL);
	+
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x12300000023LL);
	+	mb();
	+	if (atomic64_inc_return(&xxx) != 0x12300000024LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x12300000024LL);
	+	mb();
	+	if (atomic64_sub_return(0x36900000050LL, &xxx) != -0x2460000002cLL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != -0x2460000002cLL);
	+	mb();
	+	if (atomic64_dec_return(&xxx) != -0x2460000002dLL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != -0x2460000002dLL);
	+	mb();
	+	if (atomic64_add_return(0x36800000001LL, &xxx) != 0x121ffffffd4LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x121ffffffd4LL);
	+	mb();
	+	if (atomic64_cmpxchg(&xxx, 0x123456789abcdefLL, 0x121ffffffd4LL) != 0x121ffffffd4LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x121ffffffd4LL);
	+	mb();
	+	if (atomic64_cmpxchg(&xxx, 0x121ffffffd4LL, 0x123456789abcdefLL) != 0x121ffffffd4LL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0x123456789abcdefLL);
	+	mb();
	+	if (atomic64_xchg(&xxx, 0xabcdef123456789LL) != 0x123456789abcdefLL)
	+		BUG();
	+	mb();
	+	BUG_ON(atomic64_read(&xxx) != 0xabcdef123456789LL);
	+	mb();
	+}
	+
	 /*****************************************************************************/
	 /*
	  *
	@@ -845,6 +891,8 @@ void __init setup_arch(char **cmdline_p)
	 //	asm volatile("movgs %0,timerd" :: "r"(10000000));
	 //	__set_HSR(0, __get_HSR(0) | HSR0_ETMD);

	+	test_atomic64();
	+
	 } /* end setup_arch() */

	 #if 0

Note that this doesn't cover all the trivial wrappers, but does cover all the
substantial implementations.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: LCDC dcache flush for deferred io
  sh: Fix compiler error and include the definition of IS_ERR_VALUE
  sh: re-add LCDC fbdev support to the Migo-R defconfig
  sh: fix se7724 ceu names
  sh: ms7724se: Enable sh_eth in defconfig.
  arch/sh/boards/mach-se/7206/io.c: Remove unnecessary semicolons
  sh: ms7724se: Add sh_eth support
  nommu: provide follow_pfn().
  sh: Kill off unused DEBUG_BOOTMEM symbol.
  perf_counter tools: add cpu_relax()/rmb() definitions for sh.
  sh64: Hook up page fault events for software perf counters.
  sh: Hook up page fault events for software perf counters.
  sh: make set_perf_counter_pending() static inline.
  clocksource: sh_tmu: Make undefined TCOR behaviour less undefined.

Since writenotify on uncached vmas is unsupported in 2.6.31,
live with cached framebuffer memory in the deferred io
case for now and flush the dcache before forcing refresh.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NMagnus damm <damm@igel.co.jp>

When arch/sh/include/asm/syscall_32.h is included from a file that
doesn't also include linux/err.h the following error is produced,

In file included from /home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall.h:5,
                 from kernel/trace/trace_syscalls.c:3:
/home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall_32.h: In function 'syscall_get_error':
/home/matt/src/kernels/sh-2.6/arch/sh/include/asm/syscall_32.h:28: error: implicit declaration of function 'IS_ERR_VALUE'
make[2]: *** [kernel/trace/trace_syscalls.o] Error 1
make[1]: *** [kernel/trace] Error 2
make: *** [kernel] Error 2
Signed-off-by: NMatt Fleming <matt@console-pimps.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Somehow I managed to generate a diff that put these 2 lines
into the wrong function:  should have been in dump_struct()
instead of in dump_enum().
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6:
  mtd: nand: fix build failure and incorrect return from omap_wait()
  mtd: Use BLOCK_NIL consistently in NFTL/INFTL
  mtd: m25p80 timeout too short for worst-case m25p16 devices
  mtd: atmel_nand: Fix typo s/parititions/partitions/
  mtd: cmdlineparts: Use 64-bit format when printing a debug message.
  mtd: maps: Remove BUS_ID_SIZE from integrator_flash
  jffs2: fix another potential leak on error path in scan.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: invalidation reverse calls
  fuse: allow umask processing in userspace
  fuse: fix bad return value in fuse_file_poll()
  fuse: fix return value of fuse_dev_write()

This fixes kernel.org bug #13584. The IOVA code attempted to optimise
the insertion of new ranges into the rbtree, with the unfortunate result
that some ranges just didn't get inserted into the tree at all. Then
those ranges would be handed out more than once, and things kind of go
downhill from there.

Introduced after 2.6.25 by ddf02886
("PCI: iova RB tree setup tweak").
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: mark gross <mgross@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can run a 32-bit kernel on boxes with an IOMMU, so we need
pci_unmap_addr() etc. to work -- without it, drivers will leak mappings.

To be honest, this whole thing looks like it's more pain than it's
worth; I'm half inclined to remove the no-op #else case altogether.

But this is the minimal fix, which just does the right thing if
CONFIG_DMAR is set.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org  [ for 2.6.30 ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check before use it.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: remove redundant check for NULL cfqq in cfq_set_request()
  blocK: Restore barrier support for md and probably other virtual devices.
  block: get rid of queue-private command filter
  block: Create bip slabs with embedded integrity vectors
  cfq-iosched: get rid of the need for __GFP_NOFAIL in cfq_find_alloc_queue()
  cfq-iosched: move cfqq initialization out of cfq_find_alloc_queue()
  Trivial typo fixes in Documentation/block/data-integrity.txt.

* 'for-linus' of git://neil.brown.name/md:
  md: use interruptible wait when duration is controlled by userspace.
  md/raid5: suspend shouldn't affect read requests.
  md: tidy up error paths in md_alloc
  md: fix error path when duplicate name is found on md device creation.
  md: avoid dereferencing NULL pointer when accessing suspend_* sysfs attributes.
  md: Use new topology calls to indicate alignment and I/O sizes

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (31 commits)
  Revert "ipv4: arp announce, arp_proxy and windows ip conflict verification"
  igb: return PCI_ERS_RESULT_DISCONNECT on permanent error
  e1000e: io_error_detected callback should return PCI_ERS_RESULT_DISCONNECT
  e1000: return PCI_ERS_RESULT_DISCONNECT on permanent error
  e1000: fix unmap bug
  igb: fix unmap length bug
  ixgbe: fix unmap length bug
  ixgbe: Fix link capabilities during adapter resets
  ixgbe: Fix device capabilities of 82599 single speed fiber NICs.
  ixgbe: Fix SFP log messages
  usbnet: Remove private stats structure
  usbnet: Use netdev stats structure
  smsc95xx: Use netdev stats structure
  rndis_host: Use netdev stats structure
  net1080: Use netdev stats structure
  dm9601: Use netdev stats structure
  cdc_eem: Use netdev stats structure
  ipv4: Fix fib_trie rebalancing, part 3
  bnx2x: Fix the behavior of ethtool when ONBOOT=no
  sctp: xmit sctp packet always return no route error
  ...

One of the kmemleak changes caused the following
scheduling-while-holding-the-tasklist-lock regression on x86:

BUG: sleeping function called from invalid context at mm/kmemleak.c:795
in_atomic(): 1, irqs_disabled(): 0, pid: 1737, name: kmemleak
2 locks held by kmemleak/1737:
 #0:  (scan_mutex){......}, at: [<c10c4376>] kmemleak_scan_thread+0x45/0x86
 #1:  (tasklist_lock){......}, at: [<c10c3bb4>] kmemleak_scan+0x1a9/0x39c
Pid: 1737, comm: kmemleak Not tainted 2.6.31-rc1-tip #59266
Call Trace:
 [<c105ac0f>] ? __debug_show_held_locks+0x1e/0x20
 [<c102e490>] __might_sleep+0x10a/0x111
 [<c10c38d5>] scan_yield+0x17/0x3b
 [<c10c3970>] scan_block+0x39/0xd4
 [<c10c3bc6>] kmemleak_scan+0x1bb/0x39c
 [<c10c4331>] ? kmemleak_scan_thread+0x0/0x86
 [<c10c437b>] kmemleak_scan_thread+0x4a/0x86
 [<c104d73e>] kthread+0x6e/0x73
 [<c104d6d0>] ? kthread+0x0/0x73
 [<c100959f>] kernel_thread_helper+0x7/0x10
kmemleak: 834 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The bit causing it is highly dubious:

static void scan_yield(void)
{
        might_sleep();

        if (time_is_before_eq_jiffies(next_scan_yield)) {
                schedule();
                next_scan_yield = jiffies + jiffies_scan_yield;
        }
}

It called deep inside the codepath and in a conditional way,
and that is what crapped up when one of the new scan_block()
uses grew a tasklist_lock dependency.

This minimal patch removes that yielding stuff and adds the
proper cond_resched().

The background scanning thread could probably also be reniced
to +10.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the changes for falling back to an oom_cfqq, we never fail
to find/allocate a queue in cfq_get_queue(). So remove the check.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The next_ordered flag is only meaningful for devices that use __make_request.
So move the test against next_ordered out of generic code and in to
__make_request

Since this test was added, barriers have not worked on md or any
devices that don't use __make_request and so don't bother to set
next_ordered.  (dm explicitly sets something other than
QUEUE_ORDERED_NONE since
  commit 99360b4c
but notes in the comments that it is otherwise meaningless).

Cc: Ken Milmore <ken.milmore@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The initial patches to support this through sysfs export were broken
and have been if 0'ed out in any release. So lets just kill the code
and reclaim some space in struct request_queue, if anyone would later
like to fixup the sysfs bits, the git history can easily restore
the removed bits.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch restores stacking ability to the block layer integrity
infrastructure by creating a set of dedicated bip slabs.  Each bip slab
has an embedded bio_vec array at the end.  This cuts down on memory
allocations and also simplifies the code compared to the original bvec
version.  Only the largest bip slab is backed by a mempool.  The pool is
contained in the bio_set so stacking drivers can ensure forward
progress.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <axboe@carl.(none)>

Setup an emergency fallback cfqq that we allocate at IO scheduler init
time. If the slab allocation fails in cfq_find_alloc_queue(), we'll just
punt IO to that cfqq instead. This ensures that cfq_find_alloc_queue()
never fails without having to ensure free memory.

On cfqq lookup, always try to allocate a new cfqq if the given cfq io
context has the oom_cfqq assigned. This ensures that we only temporarily
punt to this shared queue.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We're going to be needing that init code outside of that function
to get rid of the __GFP_NOFAIL in cfqq allocation.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Signed-off-by: NAndre Noll <maan@systemlinux.org>
Acked-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Re-add LCDC fbdev support to the Migo-R defconfig.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Use "ceu0" and "ceu1" as CEU names instead of "ceu".
This fixes "memchunk" kernel command line selection
on the solution engine 7724 board.

With this patch applied use "memchunk.ceu0=1m" or
"memchunk.ceu1=1m" on kernel command line to override
physically memory size to one meg for CEU0 or CEU1.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

User space can set various limits on an md array so that resync waits
when it gets to a certain point, or so that I/O is blocked for a short
while.
When md is waiting against one of these limit, it should use an
interruptible wait so as not to add to the load average, and so are
not to trigger a warning if the wait goes on for too long.
Signed-off-by: NNeilBrown <neilb@suse.de>