Keep track of memslots changes by keeping generation number in memslots
structure. Provide kvm_write_guest_cached() function that skips
gfn_to_hva() translation if memslots was not changed since previous
invocation.
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If a guest accesses swapped out memory do not swap it in from vcpu thread
context. Schedule work to do swapping and put vcpu into halted state
instead.

Interrupts will still be delivered to the guest and if interrupt will
cause reschedule guest will continue to run another task.

[avi: remove call to get_user_pages_noio(), nacked by Linus; this
      makes everything synchrnous again]
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Breaks otherwise if CONFIG_IOMMU_API is not set.

KVM-Stable-Tag.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This just changes some names to better reflect the usage they
will be given.  Separated out to keep confusion to a minimum.
Signed-off-by: NZachary Amsden <zamsden@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Instead of blindly attempting to inject an event before each guest entry,
check for a possible event first in vcpu->requests.  Sites that can trigger
event injection are modified to set KVM_REQ_EVENT:

- interrupt, nmi window opening
- ppr updates
- i8259 output changes
- local apic irr changes
- rflags updates
- gif flag set
- event set on exit

This improves non-injecting entry performance, and sets the stage for
non-atomic injection.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch introduces a mmu-callback to translate gpa
addresses in the walk_addr code. This is later used to
translate l2_gpa addresses into l1_gpa addresses.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).

This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()

And it adds 'notrap' ptes check in unsync/direct sps
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce this function to get consecutive gfn's pages, it can reduce
gup's overload, used by later patch
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic
context, the later patch will use it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>

Devices register mask notifier using gsi, but irqchip knows about
irqchip/pin, so conversion from irqchip/pin to gsi should be done before
looking for mask notifier to call.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

May be used for distinguishing between internal and user slots, or for sorting
slots in size order.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Usually the vcpu->requests bitmap is sparse, so a test_and_clear_bit() for
each request generates a large number of unneeded atomics if a bit is set.

Replace with a separate test/clear sequence.  This is safe since there is
no clear_bit() outside the vcpu thread.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Makes it a little more readable and hackable.
Signed-off-by: NAvi Kivity <avi@redhat.com>

As advertised in feature-removal-schedule.txt.  Equivalent support is provided
by overlapping memory regions.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch enable guest to use XSAVE/XRSTOR instructions.

We assume that host_xcr0 would use all possible bits that OS supported.

And we loaded xcr0 in the same way we handled fpu - do it as late as we can.
Signed-off-by: NDexuan Cui <dexuan.cui@intel.com>
Signed-off-by: NSheng Yang <sheng@linux.intel.com>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal
operation.  This causes the fast path check for a clear vcpu->requests
to fail all the time, triggering tons of atomic operations.

Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic.
Signed-off-by: NAvi Kivity <avi@redhat.com>

In common cases, guest SRAO MCE will cause corresponding poisoned page
be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay
the MCE to guest OS.

But it is reported that if the poisoned page is accessed in guest
after unmapping and before MCE is relayed to guest OS, userspace will
be killed.

The reason is as follows. Because poisoned page has been un-mapped,
guest access will cause guest exit and kvm_mmu_page_fault will be
called. kvm_mmu_page_fault can not get the poisoned page for fault
address, so kernel and user space MMIO processing is tried in turn. In
user MMIO processing, poisoned page is accessed again, then userspace
is killed by force_sig_info.

To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM
and do not try kernel and user space MMIO processing for poisoned
page.

[xiao: fix warning introduced by avi]
Reported-by: NMax Asbock <masbock@linux.vnet.ibm.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

vmx and svm vcpus have different contents and therefore may have different
alignmment requirements.  Let each specify its required alignment.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Nobody use gva_to_page() anymore, get rid of it.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch limits the number of pages per memory slot to make
us free from extra care about type issues.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch increases the current hardcoded limit of NR_IOBUS_DEVS
from 6 to 200. We are hitting this limit when creating a guest with more
than 1 virtio-net device using vhost-net backend. Each virtio-net
device requires 2 such devices to service notifications from rx/tx queues.
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Int is not long enough to store the size of a dirty bitmap.

This patch fixes this problem with the introduction of a wrapper
function to calculate the sizes of dirty bitmaps.

Note: in mark_page_dirty(), we have to consider the fact that
  __set_bit() takes the offset as int, not long.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

The code relies on kvm->requests_lock inhibiting preemption.

Noted by Jan Kiszka.
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch introduces a generic function to find out the
host page size for a given gfn. This function is needed by
the kvm iommu code. This patch also simplifies the x86
host_mapping_level function.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Enable optional parameter (default 0) - PCI segment (or domain) besides
BDF, when assigning PCI device to guest.
Signed-off-by: NZhai Edwin <edwin.zhai@intel.com>
Acked-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Defer fpu deactivation as much as possible - if the guest fpu is loaded, keep
it loaded until the next heavyweight exit (where we are forced to unload it).
This reduces unnecessary exits.

We also defer fpu activation on clts; while clts signals the intent to use the
fpu, we can't be sure the guest will actually use it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Using a similar two-step procedure as for memslots.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Use two steps for memslot deletion: mark the slot invalid (which stops
instantiation of new shadow pages for that slot, but allows destruction),
then instantiate the new empty slot.

Also simplifies kvm_handle_hva locking.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

So its possible to iommu map a memslot before making it visible to
kvm.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Which takes a memslot pointer instead of using kvm->memslots.

To be used by SRCU convertion later.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Required for SRCU convertion later.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Have a pointer to an allocated region inside struct kvm.

[alex: fix ppc book 3s]
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Introduce kvm_vcpu_on_spin, to be used by VMX/SVM to yield processing
once the cpu detects pause-based looping.
Signed-off-by: N"Zhai, Edwin" <edwin.zhai@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

X86 CPUs need to have some magic happening to enable the virtualization
extensions on them. This magic can result in unpleasant results for
users, like blocking other VMMs from working (vmx) or using invalid TLB
entries (svm).

Currently KVM activates virtualization when the respective kernel module
is loaded. This blocks us from autoloading KVM modules without breaking
other VMMs.

To circumvent this problem at least a bit, this patch introduces on
demand activation of virtualization. This means, that instead
virtualization is enabled on creation of the first virtual machine
and disabled on destruction of the last one.

So using this, KVM can be easily autoloaded, while keeping other
hypervisors usable.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>