Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 14
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 04 1月, 2006 3 次提交
    • A
      [IPV6]: Introduce inet6_rsk() · ca304b61
      由 Arnaldo Carvalho de Melo 提交于 
      And inet6_rsk_offset in inet_request_sock, for the same reasons as
inet_sock's pinfo6 member.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ca304b61
    • H
      [IPV4]: Safer reassembly · 89cee8b1
      由 Herbert Xu 提交于 
      Another spin of Herbert Xu's "safer ip reassembly" patch
for 2.6.16.

(The original patch is here:
http://marc.theaimsgroup.com/?l=linux-netdev&m=112281936522415&w=2
and my only contribution is to have tested it.)

This patch (optionally) does additional checks before accepting IP
fragments, which can greatly reduce the possibility of reassembling
fragments which originated from different IP datagrams.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NArthur Kepner <akepner@sgi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      89cee8b1
    • T
      [LSM-IPSec]: Security association restriction. · df71837d
      由 Trent Jaeger 提交于 
      This patch series implements per packet access control via the
extension of the Linux Security Modules (LSM) interface by hooks in
the XFRM and pfkey subsystems that leverage IPSec security
associations to label packets.  Extensions to the SELinux LSM are
included that leverage the patch for this purpose.

This patch implements the changes necessary to the XFRM subsystem,
pfkey interface, ipv4/ipv6, and xfrm_user interface to restrict a
socket to use only authorized security associations (or no security
association) to send/receive network packets.

Patch purpose:

The patch is designed to enable access control per packets based on
the strongly authenticated IPSec security association.  Such access
controls augment the existing ones based on network interface and IP
address.  The former are very coarse-grained, and the latter can be
spoofed.  By using IPSec, the system can control access to remote
hosts based on cryptographic keys generated using the IPSec mechanism.
This enables access control on a per-machine basis or per-application
if the remote machine is running the same mechanism and trusted to
enforce the access control policy.

Patch design approach:

The overall approach is that policy (xfrm_policy) entries set by
user-level programs (e.g., setkey for ipsec-tools) are extended with a
security context that is used at policy selection time in the XFRM
subsystem to restrict the sockets that can send/receive packets via
security associations (xfrm_states) that are built from those
policies.

A presentation available at
www.selinux-symposium.org/2005/presentations/session2/2-3-jaeger.pdf
from the SELinux symposium describes the overall approach.

Patch implementation details:

On output, the policy retrieved (via xfrm_policy_lookup or
xfrm_sk_policy_lookup) must be authorized for the security context of
the socket and the same security context is required for resultant
security association (retrieved or negotiated via racoon in
ipsec-tools).  This is enforced in xfrm_state_find.

On input, the policy retrieved must also be authorized for the socket
(at __xfrm_policy_check), and the security context of the policy must
also match the security association being used.

The patch has virtually no impact on packets that do not use IPSec.
The existing Netfilter (outgoing) and LSM rcv_skb hooks are used as
before.

Also, if IPSec is used without security contexts, the impact is
minimal.  The LSM must allow such policies to be selected for the
combination of socket and remote machine, but subsequent IPSec
processing proceeds as in the original case.

Testing:

The pfkey interface is tested using the ipsec-tools.  ipsec-tools have
been modified (a separate ipsec-tools patch is available for version
0.5) that supports assignment of xfrm_policy entries and security
associations with security contexts via setkey and the negotiation
using the security contexts via racoon.

The xfrm_user interface is tested via ad hoc programs that set
security contexts.  These programs are also available from me, and
contain programs for setting, getting, and deleting policy for testing
this interface.  Testing of sa functions was done by tracing kernel
behavior.
Signed-off-by: NTrent Jaeger <tjaeger@cse.psu.edu>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      df71837d
  3. 25 12月, 2005 1 次提交
  5. 23 12月, 2005 1 次提交
    • N
      [PATCH] fix race with preempt_enable() · d6f02913
      由 Nicolas Pitre 提交于 
      Currently a simple

	void foo(void) { preempt_enable(); }

produces the following code on ARM:

foo:
	bic	r3, sp, #8128
	bic	r3, r3, #63
	ldr	r2, [r3, #4]
	ldr	r1, [r3, #0]
	sub	r2, r2, #1
	tst	r1, #4
	str	r2, [r3, #4]
	blne	preempt_schedule
	mov	pc, lr

The problem is that the TIF_NEED_RESCHED flag is loaded _before_ the
preemption count is stored back, hence any interrupt coming within that
3 instruction window causing TIF_NEED_RESCHED to be set won't be
seen and scheduling won't happen as it should.

Nothing currently prevents gcc from performing that reordering.  There
is already a barrier() before the decrement of the preemption count, but
another one is needed between this and the TIF_NEED_RESCHED flag test
for proper code ordering.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      d6f02913
  7. 22 12月, 2005 1 次提交
    • A
      [PATCH] include/linux/irq.h: #include <linux/smp.h> · 23f9b317
      由 Adrian Bunk 提交于 
      Jan's crosscompile page [1] shows, that one regression in 2.6.15-rc is
that the v850 defconfig does no longer compile.

The compile error is:

<--  snip  -->

...
  CC      arch/v850/kernel/setup.o
In file included from /usr/src/ctest/rc/kernel/arch/v850/kernel/setup.c:17:
/usr/src/ctest/rc/kernel/include/linux/irq.h:13:43: asm/smp.h: No such file or directory
make[2]: *** [arch/v850/kernel/setup.o] Error 1

<--  snip  -->

The #include <asm/smp.h> in irq.h was intruduced in 2.6.15-rc.

Since include/linux/irq.h needs code from asm/smp.h only in the
CONFIG_SMP=y case and linux/smp.h #include's asm/smp.h only in the
CONFIG_SMP=y case, I'm suggesting this patch to #include <linux/smp.h>
in irq.h.

I've tested the compilation with both CONFIG_SMP=y and CONFIG_SMP=n
on i386.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      23f9b317
  9. 21 12月, 2005 2 次提交
  11. 20 12月, 2005 2 次提交
  13. 19 12月, 2005 2 次提交
  15. 17 12月, 2005 2 次提交
  17. 15 12月, 2005 4 次提交
  19. 13 12月, 2005 15 次提交
  21. 12 12月, 2005 1 次提交
  23. 06 12月, 2005 1 次提交
  25. 02 12月, 2005 1 次提交
  27. 01 12月, 2005 2 次提交
  29. 30 11月, 2005 2 次提交