Based on the work by Andrew Zabolotny, an HID driver for the Bluetooth
Wacom tablet. This is required as it uses a slightly different
protocols from what's currently support by the drivers/input/wacom*
driver, and those only support USB.

A user-space patch is required to activate mode 2 of the Wacom tablet,
as hidp does not support hid_output_raw_report.
Signed-off-by: NBastien Nocera <hadess@hadess.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some months ago I send patch which adds autocentering for Logitech MOMO Wheel.
Now I have access to Logitech G25 Racing Wheel and test autocentering for it. I
write patch for current kernel to support autocentering for G25 in legacy mode
(this device supports other modes, but after switching device reconnects with
ID 0xc299 and FF support comes out) and others Logitech (Driving Force,
Formula Force Ex etc) wheels with ID 046d:c294.
Signed-off-by: NSergey Belyashov <Sergey.Belyashov@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: add NOGET quirk for devices from CH Products
  HID: fix dropped device-specific quirks

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  dma: fix ipu_idmac.c to not discard the last queued buffer
  ioatdma: fix "ioatdma frees DMA memory with wrong function"
  ipu_idmac: Use disable_irq_nosync() from within irq handlers.
  dmatest: fix max channels handling

* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux:
  nfsd: silence lockdep warning
  lockd: fix list corruption on lockd restart
  nfsd4: check for negative dentry before use in nfsv4 readdir
  nfsd41: slots are freed with session
  svcrdma: clean up error paths.
  svcrdma: Fix dma map direction for rdma read targets

This also fixes the case of a single queued buffer, for example, when taking a
single frame snapshot with the mx3_camera driver.
Reported-by: NAgustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Tested-by: NAgustin Ferrin Pozuelo <gatoguan-os@yahoo.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

as reported by Alexander Beregalov <a.beregalov@gmail.com>

ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with
wrong function [device address=0x000000007f76f800] [size=2000 bytes]
[map
ped as single] [unmapped as page]

The ioatdma driver was unmapping all regions
(either allocated as page or single) using unmap_page.
This patch lets dma driver recognize if unmap_single or unmap_page should be used.
It introduces two new dma control flags:
DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE.
They should be set to indicate dma driver to do dma-unmapping as single
(first one for the source, tha latter for the destination).
If respective flag is not set, the driver assumes dma-unmapping as page.
Signed-off-by: NMaciej Sosnowski <maciej.sosnowski@intel.com>
Reported-by: NAlexander Beregalov <a.beregalov@gmail.com>
Tested-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Fix a size check WRT the manual pages.  This was inadvertently broken by
commit 9fe5ad9c ("flag parameters
add-on: remove epoll_create size param").
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Cc: <Hiroyuki.Mach@gmail.com>
Cc: rohit verma <rohit.170309@gmail.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU).

You cannot make the assumption that sizeof(unsigned int) ==
sizeof(unsigned long), so the parsing of the default mode (640x480) fails,
leading to a division by zero during insmod of the driver.
Signed-off-by: NHarald Welte <HaraldWelte@viatech.com>
Cc: <JosephChan@via.com.tw>
Cc: <ScottFang@viatech.com.cn>
Cc: Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The required I2C modules are now selected automatically by the means
of select statements in Kconfig, so there is no point in confusing the
users with options he/she would be supposed to enable manually.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 9b8de747 ("FRV: Fix the section
attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU()
macros and in the process made alpha percpu.h include
include/asm-generic/percpu.h which breaks compilation due to duplicate
definitions.

Remove inclusion of generic asm helper file and define whatever necessary
in alpha header proper.

In the longer term, percpu definitions will be unified and all these
little subtlties will be removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables the alarm interrupt of TWL4030 RTC to wake up the
system from suspend. You can test this patch with following command.

# echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state;
Signed-off-by: NKim Kyuwon <q1.kim@samsung.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In order to build the generic syscall table, we need a declaration for
every system call.  sys_pipe2 was added without a proper declaration, so
add this to syscalls.h now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

setup() may fail before ctldata is set, causing a kernel panic on
cleanup().
Signed-off-by: NDaniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-2630-rc5' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL
  i2c: Enable i2c-s3c2410 for S3C64XX too
  i2c-mpc: bug fix for MPC52xx clock setting and printout
  i2c-pxa.c: timeouts off by 1

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc2007 - fix locking in hrtimer handler
  Input: atkbd - add force release keys quirk for Amilo Xi 3650
  Input: ff-memless - fix signed to unsigned bit overflow
  Input: joydev - blacklist digitizers

Remove the return after the goto.  We want the goto because it frees
memory as well as returning err.

Found by smatch (http://repo.or.cz/w/smatch.git).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recent DMA changes result in a BUG() when NULL is passed to
dma_alloc_coherent in place of a device.
Signed-off-by: NMark Ware <mware@elphinstone.net>
[ben-linux@fluff.org: fix patch moves]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This controller is also present on the S3C64xx series processors so
enable the driver in Kconfig for those platforms.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The clock setting did not work for the MPC52xx due to a stupid bug.
Furthermore, the dev info output "clock=0" for old device trees was
misleading. This patch fixes both issues.
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Now that hrtimers are always running in hard irq context we can't
unconditionally enable interrupts at the end of the timer function.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: NKwangwoo Lee <kwangwoo.lee@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NAdrian Batzill <agib@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

* 'for-linus' of git://repo.or.cz/cris-mirror:
  CRISv32: Fix typo compile error in ARTPEC-3 gpio driver.
  CRIS: Wire up syscalls signalfd4 to writev.
  CRISv32: Remove obsolete vcs_hook.o from Makefile
  CRIS: Merge machine dependent boot/compressed and boot/rescue

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata_piix: The Sony TZ90 needs the cable type hardcoding
  ata_piix: ICH7 does not support correct MWDMA timings
  Avoid world-writable sysfs files in libata driver.
  libata: fix suspend/resume for ATA SEMB devices
  libata: clear ering on resume
  pata_pdc202xx_old: fix UDMA33 handling
  sata_mv: use new sata phy register settings for new devices
  libata: fix attach error handling

The return value of dup2 when oldfd == newfd and the fd isn't valid is
not getting properly sign extended.  We end up with 4294967287 instead
of -EBADF.

I've reproduced this on SLE11 (2.6.27.21), openSUSE Factory
(2.6.29-rc5), and Ubuntu 9.04 (2.6.28).

This patch uses a signed int for the error value so it is properly
extended.

Commit 6c5d0512 introduced this
regression.
Reported-by: NJiri Dluhos <jdluhos@novell.com>
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The Sony TZ90 needs the cable type hardcoding. See bug #12734
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

See Errata documentation. The recommended workaround is to use PIO4 instead
which will we automatically do by flagging this mode not available.
Signed-off-by: NAlan Cox <alan.cox@linux.intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Signed-off-by: NVitaly Mayatskikh <v.mayatskih@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

79b42bab fixed identifying ATA devices
reporting 3c/c3 signature which belongs to SEMB devices now. However,
suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails
with the following:

hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/66 mode selected
sd 1:0:0:0: [sda] Starting disk
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata4: softreset failed (device not ready)
ata4: failed due to HW bug, retry pmp=0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: class mismatch 1 != 7
ata2.00: revalidation failed (errno=-19)
ata2: limiting SATA link speed to 1.5 Gbps
ata4.00: configured for UDMA/133
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: class mismatch 1 != 7
ata2.00: revalidation failed (errno=-19)
ata2.00: disabled
sd 1:0:0:0: rejecting I/O to offline device
sd 1:0:0:0: [sda] START_STOP FAILED
sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00
PM: Device 1:0:0:0 failed to thaw: error 65536
sd 3:0:0:0: [sdb] Starting disk

due to a class mismatch in ata_dev_revalidate(). Fix it by adding the
ATA_DEV_SEMB device class to the check.

CC: Tejun Heo <htejun@gmail.com>
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Error timestamps are in jiffies which doesn't run while suspended and
PHY events during resume isn't too uncommon.  When the two are
combined, it can lead to unnecessary speed downs if the machine is
suspended and resumed repeatedly.  Clear error history on resume.

This was reported and verified in bnc#486803 by Vladimir Botka.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NVladimir Botka <vbotka@novell.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The original driver doesn't use 66 MHz clock for UDMA33.

[ The alternative solution would be to adjust UDMA33 timings
  for 66 MHz clock but I think that it is safer to stick with
  old & tested behavior for now. ]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Marvell's new SoC (65 nano) needs different settings for its SATA
PHY registers.
Tested-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NSaeed Bishara <saeed@marvell.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

New device attach path in ata_eh_revalidate_and_attach() is divided
into two separate loops because ATA requires IDENTIFY to be issued to
slave first while the user expects to see device probe messages from
the master device.  new_mask is used to track which devices are the
new ones between the first loop and the second.

This usually works well but if an error occurs during configuration
stage, ata_dev_revalidate_and_attach() returns with error code and
forgets new_mask.  On the retry run, dev->class is set and new_mask
for the device is clear, so the device just gets revalidated and thus
ends up skipping post-configuration procedure including scheduling of
SCSI_HOTPLUG for the device.  When this occurs, ATA part of probing
works fine but SCSI probing usually doesn't happen and makes the
device unreachable.

The behavior has been around for a very long time but it has been
uncovered with the recent addition of 1_5_GBPS horkage which uses
-EAGAIN return value from ata_dev_configure() to restart the probing
sequence after forcing cable speed.

This can be fixed by making sure dev->class is permanently set only
after all configurations are successfully complete.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NTim Connors <tconnors+linuxkml@astro.swin.edu.au>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch (as1240) adds the NOGET quirk for three devices from CH
Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim
yoke.  Without these quirks, the devices haven't worked for many
kernel releases.  Sometimes replugging them after boot-up would get
them to work and sometimes they wouldn't work at all.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NSean Hildebrand <silverwraithii@gmail.com>
Reported-by: NSid Boyce <sboyce@blueyonder.co.uk>
Tested-by: NSean Hildebrand <silverwraithii@gmail.com>
Tested-by: NSid Boyce <sboyce@blueyonder.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Device-specific quirks are set up correctly in their respective vendor-specific
driver, then get overwritten in usbhid_parse().

This is only issue for device-specific NOGET quirks being set by driver for a
few devices out there.
Signed-off-by: NZoltan Karcagi <zkr@freemail.hu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE.

So it's not sufficient to ensure that you use phys_addr_t or uint64_t
everywhere you handle physical addresses -- you also have to avoid using
the construct 'addr & PAGE_MASK', because that will strip the high 32
bits of the address.

This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of
PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances
that don't matter -- where it's being used on the virtual bus addresses
we're dishing out, which are 32-bit anyway.

Since PHYSICAL_PAGE_MASK is not present on other architectures, we have
to define it (to PAGE_MASK) if it's not already defined.

Maybe it would be better just to fix PAGE_MASK for i386/PAE?
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: comedi: David doesn't want to get comedi patches
  Staging: rtl8187se: Fix compilation warnings and procfs directory leak
  Staging: rt2870: new device id
  Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect()

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  usb-serial: ftdi_sio: fix reference counting of ftdi_private
  USB: unusual_devs: extend nokia 6288 bcd range
  USB: Gadget: fix UTF conversion in the usbstring library
  USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work.
  USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug
  USB: cxacru: Fix negative dB output

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Revert driver core: move platform_data into platform_device
  Revert driver core: fix passing platform_data
  Remove old PRINTK_DEBUG config item
  Doc/sysfs-rules: Swap the order of the words so the sentence makes more sense
  Driver core: platform: fix kernel-doc warnings