Now one has just to press the right key, 'a' or Enter on the main 'perf
top --tui' screen to live annotate the symbol under the cursor.

The annotate window starts centered on the hottest line (the one with
most samples so far) then TAB and shift+TAB can be used to go to the
prev/next hot line.

Pressing 'H' at any point will center again the screen on the hottest
line.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While fixing an error propagating problem in f809b25 I added two
redundant checks.

I did that because I didn't expect the checks to be on the while and for
loop condition expression, where they are tested before we run the loop,
where the 'ret' variable is set.

So remove it from there and leave it just after it is actually set,
eliminating unneded tests.
Reported-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The kernel refuses mmapping an event with the inherit flag set for
something that is systemwide (cpu == -1), and the evsel layer got this
reversed at some point, fix it.

The symtom was that the --pid and --tid parameters for 'perf record' and
'perf top' returned with -EINVAL, like:

 # /tmp/build-perf/perf record -v -fo/tmp/perf.data -p 1042
   Warning:  ... trying to fall back to cpu-clock-ticks

   Fatal: failed to mmap with 22 (Invalid argument)
Reported-by: NDavid Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There are two hunks in this patch that stops probe processing as soon as one
error is found, breaking out of loops, the other fix an error propagation that
should return a negative error number but instead was returning the result of
"ret < 0", which is 1 and thus made several error checks fail because they test
agains < 0.

The problem could be triggered by asking for a variable that was optimized out,
fact that should stop the whole probe processing but instead was segfaulting
while installing broken probes:

[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
 Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
Add new events:
  probe:perf_mmap      (on perf_mmap:55 with user_lock_limit)
  probe:perf_mmap_1    (on perf_mmap:55 with user_lock_limit)
Segmentation fault (core dumped)
[root@emilia ~]# perf probe -l
  probe:perf_mmap      (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
  probe:perf_mmap_1    (on perf_mmap:55@git/linux/kernel/perf_event.c with user_lock_limit)
[root@emilia ~]#

After the fix:

[root@emilia ~]# probe perf_mmap:55 user_lock_limit
Failed to find the location of user_lock_limit at this address.
 Perhaps, it has been optimized out.
Failed to find 'user_lock_limit' in this function.
  Error: Failed to add events. (-2)
[root@emilia ~]#

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit squashes several commits that remove:

 unnecessary uname calls
 `sh -c'
 BUILT_INS and QUIET_BUILT_IN

    They have no effect, and the `fixup-builtins' and `check-builtins.sh'
    scripts don't even exist.

 RUNTIME_PREFIX

    It's currently never anything but unset, and it's apparently
    only meaningful when Microsoft Windows is the operating system
    (according to the source for git).

 TEST_PROGRAMS
 EXTRA_PROGRAMS
 unused SHELL_PATH_SQ portions
 unused test for V=2
 useless exports

    Only when `V' is undefined (that is, only when the value of `V'
    is empty) is `export V' performed, which just has the effect of
    placing the empty-valued variable `V' in the environment.

    The only other script to make use of `V' is `Documentation/Makefile',
    which only checks whether `V' is undefined (that is, whether the value
    of `V' is empty); hence, the `export V' has no effect whatsoever.

    Similarly, `export QUIET_GEN' is useless because it will only have
    a non-empty value when `V' has an empty-value, and when `V' has
    an empty-value, `QUIET_GEN' is always explicitly set in every
    script in which it is used.

    `DESTDIR' is only ever defined by the user via the environment
    or the command line, both of which are automatically exported
    to sub-make processes. Furthermore, no non-make sub-scripts
    make use of `DESTDIR' as an environment variable.

    No other scripts use `perfexec_instdir'.

 unused QUIET_SUBDIR{0,1}
 TAR and RPMBUILD
 PTHREAD_LIBS
 Maintainer's dist rules and commands
 distclean target
 Test suite coverage testing
 PRINT_DIR and NO_SUBDIR
 `configure' target
 NO_CURL
 @@PERF_VERSION@@ substitution

    Without the sed command, all of the rule's commands can be reduced
    to a single line that copies a file and sets the permissions properly
    in the process.

 `make test' echo line
 template_instdir
 PERF-BUILD-OPTIONS
 double-colon rules

    The use of double-colon rules seems misguided or vestigial git.

 Essentially hard-coded $(SCRIPTS) expansion
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit squashes several commits that remove:

 NO_C99_FORMAT
 CURLDIR and EXPATDIR
 NO_DEFLATE_BOUND
 CC_LD_DYNPATH and NO_R_TO_GCC_LINKER
 NO_PERL_MAKEMAKER
 INTERNAL_QSORT
 NO_EXTERNAL_GREP
 NO_PERL
 SCRIPT_PERL
 PERL_PATH_SQ
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While it makes sense that this tool could be used on
other platforms at least to parse data, there doesn't
appear to be any real support for such usage.

This commit squashes several commits that remove:

 SNPRINTF_RETURNS_BOGUS
 FREAD_READS_DIRECTORIES
 NO_D_{INO,TYPE}_IN_DIRENT
 NO_STRCASESTR
 NO_MEMMEM
 NO_STRTOUMAX and NO_STRTOULL
 NO_SETENV
 NO_UNSETENV
 NO_MKDTEMP
 NEEDS_LIBICONV
 NEEDS_SOCKET
 NO_MMAP
 NO_PTHREADS
 NO_PREAD
 NO_TRUSTABLE_FILEMODE
 NO_IPV6 and NO_SOCKADDR_STORAGE
 NO_ICONV and OLD_ICONV
 NO_NSEC, USE_NSEC, and USE_ST_TIMESPEC
 NO_ST_BLOCKS_IN_STRUCT_STAT
 NO_FINK and NO_DARWIN_PORTS
 NO_SYS_SELECT_H
 NO_HSTRERROR
 DIR_HAS_BSD_GROUP_SEMANTICS and FORCE_DIR_SET_GID
 NEEDS_NSL, NO_UINTMAX_T, NO_INET_{N,P}TON
 COMPAT_{CFLAGS,OBJS}
 Executable extension `X'
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This commit squashes several commits that remove:

 NO_SYMLINK_HEAD
 NO_SVN_TESTS
 NO_FAST_WORKING_DIRECTORY
 USE_STDEV
 SHA1/SSL cruft
 makefile rules
Signed-off-by: NMichael Witten <mfwitten@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

With no caller left, the function and the DIE_NMIWATCHDOG
enumerator can both go away.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
LKML-Reference: <4D5D521C0200007800032702@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

This reverts commit 5e38ca8f.

Breaks the build of several !CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
architectures.

Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Message-ID: <20110217171823.GB17058@elte.hu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The man page has the details, here are some examples:

[root@emilia ~]# perf list *fault*  *:*wait*

List of pre-defined events (to be used in -e):
  page-faults OR faults                      [Software event]
  minor-faults                               [Software event]
  major-faults                               [Software event]
  alignment-faults                           [Software event]
  emulation-faults                           [Software event]

  radeon:radeon_fence_wait_begin             [Tracepoint event]
  radeon:radeon_fence_wait_end               [Tracepoint event]
  writeback:wbc_writeback_wait               [Tracepoint event]
  writeback:wbc_balance_dirty_wait           [Tracepoint event]
  writeback:writeback_congestion_wait        [Tracepoint event]
  writeback:writeback_wait_iff_congested     [Tracepoint event]
  sched:sched_wait_task                      [Tracepoint event]
  sched:sched_process_wait                   [Tracepoint event]
  sched:sched_stat_wait                      [Tracepoint event]
  sched:sched_stat_iowait                    [Tracepoint event]
  syscalls:sys_enter_epoll_wait              [Tracepoint event]
  syscalls:sys_exit_epoll_wait               [Tracepoint event]
  syscalls:sys_enter_epoll_pwait             [Tracepoint event]
  syscalls:sys_exit_epoll_pwait              [Tracepoint event]
  syscalls:sys_enter_rt_sigtimedwait         [Tracepoint event]
  syscalls:sys_exit_rt_sigtimedwait          [Tracepoint event]
  syscalls:sys_enter_waitid                  [Tracepoint event]
  syscalls:sys_exit_waitid                   [Tracepoint event]
  syscalls:sys_enter_wait4                   [Tracepoint event]
  syscalls:sys_exit_wait4                    [Tracepoint event]
  syscalls:sys_enter_waitpid                 [Tracepoint event]
  syscalls:sys_exit_waitpid                  [Tracepoint event]
[root@emilia ~]#
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

[root@emilia ~]# perf report --stdio
The perf.data file has no samples!
[root@emilia ~]#

The TUI shows a popup warning message with the same message.
Reported-by: NIngo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

While testing the --filter option I noticed that we were writing lots of
unneeded stuff to the perf.data header when the filter ioctl fails, so
move the atexit(atexit_header) call to after we create the counters
successfully.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#
Reported-by: NStephane Eranian <eranian@google.com>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core

This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).

This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.

This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.

$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011

 Performance counter stats for 'date':

            568600 cycles:u
           2779715 cycles:k

        0.001908182  seconds time elapsed

Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: NStephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d9 "Add cgroup support" ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 023695d9 cset added a new file, util/cgroup.c, that is referenced from
util/evsel.c, so it needs to be present in util/setup.py so that the python
shared object binding works, fixing this:

[root@emilia linux]# export PYTHONPATH=~acme/git/build/perf/python/
[root@emilia linux]# ./tools/perf/python/twatch.py
Traceback (most recent call last):
  File "./tools/perf/python/twatch.py", line 16, in <module>
    import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: close_cgroup

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Show filename which contains a target function with the function name on
"--lines" mode, because perf-probe just shows the first function even if
there are many same-name functions.

Originally adopted by Franck Bui-Huu's patch which shows file name
instead of function name. I've just modified it to show both of function
name and file name, because of completeness of output.

 E.g.)
 $ perf probe -L t_show
 <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/ftrace.c:0>
      0  static int t_show(struct seq_file *m, void *v)
      1  {
      2         struct ftrace_iterator *iter = m->private;
 ...

 $ perf probe -L t_show@trace/trace.c
 <t_show@/home/mhiramat/ksrc/linux-2.6-tip/kernel/trace/trace.c:0>
      0  static int t_show(struct seq_file *m, void *v)
      1  {
                struct tracer *t = v;
 ...
Original-patch-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110210090816.1809.43426.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Since "perf probe --add" supports function@filename syntax, --line
option should also support it.

Cc: 2nddept-manager@sdl.hitachi.co.jp
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <20110210090810.1809.26913.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf makefile is nicely complete except for

a) an uninstall option
b) a 'make help' description

This patch implements b)
it also comments out other non-working makefile targets
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Not just for the percentage number, to see the hot lines more easily.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Just like done on symbol__inc_addr_samples to catch misparsed offsets
from objdump.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The ui operations so far were used by just one thread, but 'perf top
--tui' now has two threads updating the screen, so we need to use a
mutex to avoid garbling the screen.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There is no need to re-initialize the hrtimer every time we start it,
so don't do that (shaves a few cycles). Also, since we know hrtimers
run at a fixed rate (nanoseconds) we can pre-compute the desired
frequency at which they tick. This avoids us having to go through the
whole adaptive frequency feedback logic (shaves another few cycles).
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1297448589.5226.47.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By pre-computing the maximum number of samples per tick we can avoid a
multiplication and a conditional since MAX_INTERRUPTS >
max_samples_per_tick.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds support for AMD family 15h core counters. There are
major changes compared to family 10h. First, there is a new perfctr
msr range for up to 6 counters. Northbridge counters are separate
now. This patch only adds support for core counters. Second, certain
events may only be scheduled on certain counters. For this we need to
extend the event scheduling and constraints.

We use cpu feature flags to calculate family 15h msr address offsets.
This way we later can implement a faster ALTERNATIVE() version for
this.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110215135210.GB5874@erda.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Instead of storing the base addresses we can store the counter's msr
addresses directly in config_base/event_base of struct hw_perf_event.
This avoids recalculating the address with each msr access. The
addresses are configured one time. We also need this change to later
modify the address calculation.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1296664860-10886-5-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch allows the reservation of perfctrs with new msr addresses
introduced for AMD cpu family 15h (0xc0010200/0xc0010201, etc).
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1296664860-10886-4-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds helper functions to calculate perfctr msr addresses.
We need this to later add support for AMD family 15h cpus. For this we
have to change the algorithms to generate the perfctr's msr addresses.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1296664860-10886-3-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use helper function in x86_pmu_enable_all() to minimize access to
x86_pmu.eventsel in the fast path. The counter's msr address is now
calculated using struct hw_perf_event. Later we add code that
calculates the msr addresses with a table lookup which shouldn't be
done in the fast path.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1296664860-10886-2-git-send-email-robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.

The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.

Example:

$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
 Performance counter stats for 'sleep 1':

      2,368,667,414  cycles                   test1
      2,369,661,459  cycles
      <not counted>  cycles                   test2

        1.001856890  seconds time elapsed
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This kernel patch adds the ability to filter monitoring based on
container groups (cgroups). This is for use in per-cpu mode only.

The cgroup to monitor is passed as a file descriptor in the pid
argument to the syscall. The file descriptor must be opened to
the cgroup name in the cgroup filesystem. For instance, if the
cgroup name is foo and cgroupfs is mounted in /cgroup, then the
file descriptor is opened to /cgroup/foo. Cgroup mode is
activated by passing PERF_FLAG_PID_CGROUP in the flags argument
to the syscall.

For instance to measure in cgroup foo on CPU1 assuming
cgroupfs is mounted under /cgroup:

struct perf_event_attr attr;
int cgroup_fd, fd;

cgroup_fd = open("/cgroup/foo", O_RDONLY);
fd = perf_event_open(&attr, cgroup_fd, 1, -1, PERF_FLAG_PID_CGROUP);
close(cgroup_fd);
Signed-off-by: NStephane Eranian <eranian@google.com>
[ added perf_cgroup_{exit,attach} ]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590250.114ddf0a.689e.4482@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the ::exit method act like ::attach, it is after all very nearly
the same thing.

The bug had no effect on correctness - fixing it is an optimization for
the scheduler. Also, later perf-cgroups patches rely on it.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Menage <menage@google.com>
LKML-Reference: <1297160655.13327.92.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge reason: we need to queue up dependent patch
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It was possible to call pmu::start() on an already running event. In
particular this lead so some wreckage as the hrtimer events would
re-initialize active timers.

This was due to throttled events being activated again by scheduling.
Scheduling in a context would add and force start events, resulting in
running events with a possible throttle status. The next tick to hit
that task will then try to unthrottle the event and call ->start() on
an already running event.
Reported-by: NJeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Several people have reported spurious unknown NMI
messages on some P4 CPUs.

This patch fixes it by checking for an overflow (negative
counter values) directly, instead of relying on the
P4_CCCR_OVF bit.
Reported-by: NGeorge Spelvin <linux@horizon.com>
Reported-by: NMeelis Roos <mroos@linux.ee>
Reported-by: NDon Zickus <dzickus@redhat.com>
Reported-by: NDave Airlie <airlied@gmail.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <AANLkTinfuTfCck_FfaOHrDqQZZehtRzkBum4SpFoO=KJ@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: set flow handler for secondary interrupt controller of 5249
  m68knommu: remove use of IRQ_FLG_LOCK from 68360 platform support
  m68knommu: fix dereference of port.tty
  m68knommu: add missing linker __modver section
  m68knommu: fix mis-named variable int set_irq_chip loop
  m68knommu: add optimize memmove() function
  m68k: remove arch specific non-optimized memcmp()
  m68knommu: fix use of un-defined _TIF_WORK_MASK
  m68knommu: Rename m548x_wdt.c to m54xx_wdt.c
  m68knommu: fix m548x_wdt.c compilation after headers renaming
  m68knommu: Remove dependencies on nonexistent M68KNOMMU