With generic modular drivers handling all of this stuff, the
geode-specific code can go away.  The cs5535-gpio, cs5535-mfgpt, and
cs5535-clockevt drivers now handle this.
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

..and include them in the lxfb/gxfb drivers rather than asm/geode.h (where
possible).
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The only thing that uses this is the reboot_fixups code.
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is based on the old code in arch/x86/kernel/mfgpt_32.c, but is
modular and not Geode-specific.  There's no reason why the clock event
device needs to be registered so early at boot; the clockevent code is
perfectly capable of dynamic switching.

[akpm@linux-foundation.org: add linux/irq.h include]
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is based on the old code on arch/x86/kernel/mfgpt_32.c, except it's
not x86 specific, it's modular, and it makes use of a PCI BAR rather than
a random MSR.  Currently module unloading is not supported; it's uncertain
whether or not it can be made work with the hardware.

[akpm@linux-foundation.org: add X86 dependency]
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Previously, OLPC support for the mic extensions was only enabled in the
ALSA driver if CONFIG_OLPC and CONFIG_MGEODE_LX were both set.  This was
because the old geode GPIO code was written in a manner that assumed
CONFIG_MGEODE_LX.  With the new cs553x-gpio driver, this is no longer the
case; as such, we can drop the requirement on CONFIG_MGEODE_LX and instead
include a requirement on GPIOLIB.

We use the generic GPIO API rather than the cs553x-specific API.
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed number of gpio pins to 32 (according to datasheet)

Added mask to disable some pins

Added gpio_request for checking mask and disabling special pin functions

Added pin names

[dilinger@collabora.co.uk: make printk usage consistent]
Signed-off-by: NTobias Mueller <Tobias_Mueller@twam.info>
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend
(allowing GPIO users to use the generic GPIO API if desired) while also
allowing architecture-specific users directly (via the cs5535_gpio_*
functions).

Tested on an OLPC machine.  Some Leemotes also use CS5536 (with a mips
cpu), which is why this is in drivers/gpio rather than arch/x86.
Currently, it conflicts with older geode GPIO support; once MFGPT support
is reworked to also be more generic, the older geode code will be removed.
Signed-off-by: NAndres Salomon <dilinger@collabora.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: David Brownell <david-b@pacbell.net>
Reviewed-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use DECLARE_BITMAP(), find_first_zero_bit(), set_bit() and clear_bit()
instead of rewriting code to do it with the minor number dynamic
allocation bitmap.

We need to invert the bit position to keep the code behaviour of using the
last minor numbers first, since we don't have a find_last_zero_bit.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If there's a failure creating the device (because there's already one with
the same name, for example), the current implementation does not clear the
bit for the allocated minor and that number is lost for future
allocations.

Second, the test currently in misc_deregister is broken, since it does not
test for the 0 minor.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are quite a few instances in the kernel of checks of pointers both
against NULL and against the errno range, handling both cases identically.
This additional helper function would simplify such code.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Two IOC3 and IOC4 drivers have broken error paths on registration.  Fix
them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Pat Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several IOC3 and IOC4 drivers misuse the __devinit and __devexit section
markers.  Use __init and __exit instead as appropriate, then add __devinit
and __devexit where they really belong for PCI drivers.

Also make ioc4_serial_init static.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

journal_info in task_struct is used in journaling file system only.  So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.
Signed-off-by: NHiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's easy to lose useful DEBUG_BUGVERBOSE by switching EMBEDDED left and right.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a printk_ratelimited statement expression macro that uses a per-call
ratelimit_state so that multiple subsystems output messages are not
suppressed by a global __ratelimit state.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: s/_rl/_ratelimited/g]
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Naohiro Ooiwa <nooiwa@miraclelinux.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 8c870933 has removed the
pmu_device_init call from misc_init, but unlike other similar commits,
has not removed its declaration.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_each_thread/while_each_thread wrap a block of code that is in this format:

	for (...)
		do
			...
		while

If curly braces do not surround the inner loop the following warning is
generated by sparse:

	warning: do-while statement is not a compound statement

Fix the warning by adding the braces.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

According to feature-removal-schedule.txt, it is the time to remove
print_fn_descriptor_symbol().

And a quick grep shows that it no longer has any callers.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rwsem_is_locked() tests ->activity without locks, so we should always keep
->activity consistent.  However, the code in __rwsem_do_wake() breaks this
rule, it updates ->activity after _all_ readers waken up, this may give
some reader a wrong ->activity value, thus cause rwsem_is_locked() behaves
wrong.

Quote from Andrew:

"
- we have one or more processes sleeping in down_read(), waiting for access.

- we wake one or more processes up without altering ->activity

- they start to run and they do rwsem_is_locked().  This incorrectly
  returns "false", because the waker process is still crunching away in
  __rwsem_do_wake().

- the waker now alters ->activity, but it was too late.
"

So we need get a spinlock to protect this.  And rwsem_is_locked() should
not block, thus we use spin_trylock_irqsave().

[akpm@linux-foundation.org: simplify code]
Reported-by: NBrian Behlendorf <behlendorf1@llnl.gov>
Cc: Ben Woodard <bwoodard@llnl.gov>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions need not to be exported, since no drivers should use them.

__init_rwsem() is an exception, because init_rwsem(), which is a macro,
is used.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't initialize __print_once.  Invert the test to reduce initialized
data.

defconfig before:	$size vmlinux
   text	   data	    bss	    dec	    hex	filename
6976022	 679572	1359668	9015262	 898fde	vmlinux

defconfig after:	$size vmlinux
   text	   data	    bss	    dec	    hex	filename
6976006	 679508	1359700	9015214	 898fae	vmlinux
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The symbol 'call' is a static symbol used for initcall_debug.  This same
symbol name is used locally by a couple functions and produces the
following sparse warnings:

	warning: symbol 'call' shadows an earlier one

Fix this noise by renaming the local symbols.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Cc: "H Hartley Sweeten" <hartleys@visionengravers.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use smp_processor_id() instead of get_cpu() and put_cpu() in
generic_smp_call_function_interrupt(), It's no need to disable preempt,
because we must call generic_smp_call_function_interrupt() with interrupts
disabled.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This driver supports the non-volatile digital potentiometers via I2C:
AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, and AD5255

It provides a sysfs interface to each device for reading/writing which
is documented in Documentation/misc-devices/ad525x_dpot.txt.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NChris Verges <chrisv@cyberswitching.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_DYNAMIC_DEBUG is enabled and a source file has:

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>

dynamic_debug.h will duplicate KBUILD_MODNAME
in the output string.

Remove the use of KBUILD_MODNAME from the
output format string generated by dynamic_debug.h

If CONFIG_DYNAMIC_DEBUG is not enabled, no compile-time
check is done to printk/dev_printk arguments.

Add it.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Jason Baron <jbaron@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 70867453 ("printk_once(): use bool
for boolean flag") changed printk_once() to use bool instead of int for
its guard variable.  Do the same change to WARN_ONCE() and WARN_ON_ONCE(),
for the same reasons.

This resulted in a reduction of 1462 bytes on a x86-64 defconfig:

   text    data     bss     dec     hex filename
8101271 1207116  992764 10301151         9d2edf vmlinux.before
8100553 1207148  991988 10299689         9d2929 vmlinux.after
Signed-off-by: NCesar Eduardo Barros <cesarb@cesarb.net>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert code away from ->read_proc/->write_proc interfaces.  Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.

Problem with ->read_proc et al is described here commit
786d7e16 "Fix rmmod/read/write races in
/proc entries"
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

gcc is not convinced that the floppy.c ioctl has sufficient bound checks:

In function `copy_from_user',
    inlined from `fd_copyin' at drivers/block/floppy.c:3080,
    inlined from `fd_ioctl' at drivers/block/floppy.c:3503:
    arch/x86/include/asm/uaccess_32.h:211:
warning: call to `copy_from_user_overflow' declared with attribute
warning: copy_from_user buffer size is not provably correct

And frankly, as a human I have a hard time proving the same more or less
(the size comes from the ioctl argument.  humpf.  maybe.  the code isn't
very nice)

This patch adds an explicit check to make 100% sure it's safe, better than
finding out later that there indeed was a gap.

[akpm@linux-foundation.org: add WARN_ON()]
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It does not seem possible that ldev can be NULL, so drop the unnecessary
test.  If ldev can somehow be NULL, then the initialization of last_idx
should be moved below the test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert code away from ->read_proc/->write_proc interfaces.  Switch to
proc_create()/proc_create_data() which make addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.

Problem with ->read_proc et al is described here commit
786d7e16 "Fix rmmod/read/write races in
/proc entries"
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setting a thread's comm to be something unique is a very useful ability
and is helpful for debugging complicated threaded applications.  However
currently the only way to set a thread name is for the thread to name
itself via the PR_SET_NAME prctl.

However, there may be situations where it would be advantageous for a
thread dispatcher to be naming the threads its managing, rather then
having the threads self-describe themselves.  This sort of behavior is
available on other systems via the pthread_setname_np() interface.

This patch exports a task's comm via proc/pid/comm and
proc/pid/task/tid/comm interfaces, and allows thread siblings to write to
these values.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Mike Fulton <fultonm@ca.ibm.com>
Cc: Sean Foley <Sean_Foley@ca.ibm.com>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On no-MMU systems, sizes reported in /proc/n/statm have units of bytes.
Per Documentation/filesystems/proc.txt, these values should be in pages.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The NOMMU code currently clears all anonymous mmapped memory.  While this
is what we want in the default case, all memory allocation from userspace
under NOMMU has to go through this interface, including malloc() which is
allowed to return uninitialized memory.  This can easily be a significant
performance penalty.  So for constrained embedded systems were security is
irrelevant, allow people to avoid clearing memory unnecessarily.

This also alters the ELF-FDPIC binfmt such that it obtains uninitialised
memory for the brk and stack region.
Signed-off-by: NJie Zhang <jie.zhang@analog.com>
Signed-off-by: NRobin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NGreg Ungerer <gerg@snapgear.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch enables extraction of the pfn of a hugepage from
/proc/pid/pagemap in an architecture independent manner.

Details
-------
My test program (leak_pagemap) works as follows:
 - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
 - read()/write() something on it,
 - call page-types with option -p,
 - munmap() and unlink() the file on hugetlbfs

Without my patches
------------------
$ ./leak_pagemap
             flags page-count       MB  symbolic-flags                     long-symbolic-flags
0x0000000000000000          1        0  __________________________________
0x0000000000000804          1        0  __R________M______________________ referenced,mmap
0x000000000000086c         81        0  __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808          5        0  ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868         12        0  ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c          1        0  __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
             total        101        0

The output of page-types don't show any hugepage.

With my patches
---------------
$ ./leak_pagemap
             flags page-count       MB  symbolic-flags                     long-symbolic-flags
0x0000000000000000          1        0  __________________________________
0x0000000000030000      51100      199  ________________TG________________ compound_tail,huge
0x0000000000028018        100        0  ___UD__________H_G________________ uptodate,dirty,compound_head,huge
0x0000000000000804          1        0  __R________M______________________ referenced,mmap
0x000000000000080c          1        0  __RU_______M______________________ referenced,uptodate,mmap
0x000000000000086c         80        0  __RU_lA____M______________________ referenced,uptodate,lru,active,mmap
0x0000000000005808          4        0  ___U_______Ma_b___________________ uptodate,mmap,anonymous,swapbacked
0x0000000000005868         12        0  ___U_lA____Ma_b___________________ uptodate,lru,active,mmap,anonymous,swapbacked
0x000000000000586c          1        0  __RU_lA____Ma_b___________________ referenced,uptodate,lru,active,mmap,anonymous,swapbacked
             total      51300      200

The output of page-types shows 51200 pages contributing to hugepages,
containing 100 head pages and 51100 tail pages as expected.

[akpm@linux-foundation.org: build fix]
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most callers of pmd_none_or_clear_bad() check whether the target page is
in a hugepage or not, but walk_page_range() do not check it.  So if we
read /proc/pid/pagemap for the hugepage on x86 machine, the hugepage
memory is leaked as shown below.  This patch fixes it.

Details
=======
My test program (leak_pagemap) works as follows:
 - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
 - read()/write() something on it,
 - call page-types with option -p (walk around the page tables),
 - munmap() and unlink() the file on hugetlbfs

Without my patches
------------------
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_pagemap
[snip output]
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:      900
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs/
$

100 hugepages are accounted as used while there is no file on hugetlbfs.

With my patches
---------------
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_pagemap
[snip output]
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs
$

No memory leaks.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Most callers of pmd_none_or_clear_bad() check whether the target page is
in a hugepage or not, but mincore() and walk_page_range() do not check it.
 So if we use mincore() on a hugepage on x86 machine, the hugepage memory
is leaked as shown below.  This patch fixes it by extending mincore()
system call to support hugepages.

Details
=======
My test program (leak_mincore) works as follows:
 - creat() and mmap() a file on hugetlbfs (file size is 200MB == 100 hugepages,)
 - read()/write() something on it,
 - call mincore() for first ten pages and printf() the values of *vec
 - munmap() and unlink() the file on hugetlbfs

Without my patch
----------------
$ cat /proc/meminfo| grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_mincore
vec[0] 0
vec[1] 0
vec[2] 0
vec[3] 0
vec[4] 0
vec[5] 0
vec[6] 0
vec[7] 0
vec[8] 0
vec[9] 0
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:      999
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs/
$

Return values in *vec from mincore() are set to 0, while the hugepage
should be in memory, and 1 hugepage is still accounted as used while
there is no file on hugetlbfs.

With my patch
-------------
$ cat /proc/meminfo| grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ./leak_mincore
vec[0] 1
vec[1] 1
vec[2] 1
vec[3] 1
vec[4] 1
vec[5] 1
vec[6] 1
vec[7] 1
vec[8] 1
vec[9] 1
$ cat /proc/meminfo |grep "HugePage"
HugePages_Total:    1000
HugePages_Free:     1000
HugePages_Rsvd:        0
HugePages_Surp:        0
$ ls /hugetlbfs/
$

Return value in *vec set to 1 and no memory leaks.

[akpm@linux-foundation.org: cleanup]
[akpm@linux-foundation.org: build fix]
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>