- 19 11月, 2009 15 次提交
-
-
由 David-John Willis 提交于
wl1251 supports also that NVS is stored in a separate EEPROM, add support for that. kvalo: use platform data instead Kconfig and use kernel style Signed-off-by: NDavid-John Willis <John.Willis@Distant-earth.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
Fixes warnings: drivers/net/wireless/wl12xx/wl1251_rx.c: In function 'wl1251_rx_status': drivers/net/wireless/wl12xx/wl1251_rx.c:75: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:77: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) drivers/net/wireless/wl12xx/wl1251_rx.c:78: warning: 'qual' is deprecated (declared at include/net/mac80211.h:555) Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vidhya Govindan 提交于
According to IEEE80211 standard all the data packets have to be sent with TODS bit set. This patch fixes the null data packet format which was sent without TODS bit set. This should fix many problems associated with power save. Janne Ylalehto also found this fix in the same time as mine, for a different bug he was working on. Signed-off-by: NVidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
In some cases, the IRQ loop handler could acknowledge an interrupt to the chipset, but not service it. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Janne Ylalehto 提交于
Filter out unwanted events to reduce wakeups. Signed-off-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: NVidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Janne Ylalehto 提交于
Add support for IRQ looping. Helps in the case that we have e.g. multiple packets coming from the network when we wake up from the ELP. Signed-off-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vidhya Govindan 提交于
This patch increases the number of beacons to be missed before generating SYNC TIMEOUT event. It increases the beacon timeout period to 500 microseconds, which gives enough time for the firmware to receive probe response or beacon. Also handled the regain event from firmware once it receives a probe response or beacon. Signed-off-by: NVidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vidhya Govindan 提交于
This patch sets the dtim period obtained from the mac80211 to firmware. Signed-off-by: NVidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Vidhya Govindan 提交于
The dtim period obtained from the mac80211 is not set to the firmware. This patch implements the acx command to set correct tbtt and dtim value to the firmware. Signed-off-by: NVidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
In ps-poll template aid bits 14 and 15 were not masked as required by the standard. Mask them so that aid is sent in correct format. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NVidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
Earlier firmware was stored to a memory area allocated with kmalloc() but finding a a contiguous area of memory long enough for the firmware is very difficult in certain cases. better to allocate the memory for firmware with vmalloc() instead and use a small buffer for DMA transfers. Thanks to Eero Tamminen for the idea. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Reviewed-by: NVidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Implement (slightly) delayed entry into ELP. This will cure several problems: - It works around a firmware race condition if ELP is entered too fast after commands (resulting in ELP timeout -traces) - It will reduce the number of sleep-wake cycles between already scheduled events such as interrupts and tx, hence improving performance (less delay in switching between RX and TX) Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NVidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Enable beacon filtering when PSM is enabled Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Enable beacon filtering with the mac80211 stack. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Add configuration for connection monitor (number of allowed beacons, and timeout after last received beacon.) Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 11月, 2009 1 次提交
-
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 11月, 2009 2 次提交
-
-
由 Luis R. Rodriguez 提交于
RX is handled in a workqueue therefore allocating for GFP_ATOMIC is overkill and not required. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Acked-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
wl1271_main.c:(.text+0x271052): undefined reference to `unregister_inetaddr_notifier' wl1271_main.c:(.text+0x2714d7): undefined reference to `register_inetaddr_notifier' Driver is doing some filtering based on IP addresses... Acked-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 11月, 2009 6 次提交
-
-
由 Juuso Oikarinen 提交于
Responses to firmware commands are read in by the command transmission function, as part of command flow. Previously responses were read in multiple places. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Correct the endianness-handling of the firmware command result status handling code. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
PSM entries can fail (transmitting the corresponding null-func may not be heard by the AP.) Previously, this scenario was not detected, and out-of-sync between STA and AP could occur. Add retry implementation for the entries to recover from the situation. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Check the result code of all commands, and return an error code if the firmware reports an error in execution. Previously this error would go ignored in most cases. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Currently, to avoid distortions, the TX power level has been hardcoded to a low value. The value is slightly too low for good functionality, so we increase it from 7dB to 12dB. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
The null-data template (nullfunc) is dependent on the BSSID of the current AP only, so it needs to be updated only when the BSSID changes. Removed excess setting of the template. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 31 10月, 2009 3 次提交
-
-
由 Luciano Coelho 提交于
The check after the loop which checks whether the initialization timed-out was wrong. If the initialization would succeed exactly in the 20000th time (the value set for INIT_LOOP), the driver would bail out and claim that initialization failed. Reported-by: NJuha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
wl1251 supports power save and it can be enabled now. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 10月, 2009 13 次提交
-
-
由 Luciano Coelho 提交于
Use the new ieee80211_rx_ni() function instead of ieee80211_rx(). Since we use a workqueue to handle the RX path, we need to call the new function, which disables bottom half handling. This patch fixes the NOHZ: local_softirq_pending messages. CC: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
"wl1251: add support for PG11 chips." accidentally enabled PG10 chips as well... Reported-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
Because of SPI and SDIO wl1251 does everything in a workqueue, including calling ieee80211_rx() which should be called with bottom halves disabled. An error message is emitted because of this: NOHZ: local_softirq_pending 08 Fix this by using ieee80211_rx_ni(). Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David-John Willis 提交于
This simple patch adds support for the PG11 variant of the WL1251 chip as used on the OpenPandora OMAP3 device. Signed-off-by: NDavid-John Willis <John.Willis@Distant-earth.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Some of the struct definitions in the wl1271_acx.h file were missing the __attribute__ ((packed)) modifier. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Some of the struct definitions in the wl1271_acx.h file were missing the __attribute__ ((packed)) modifier. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
The following sparse warnings were fixed: drivers/net/wireless/wl12xx/wl1271_spi.c:199:6: warning: symbol 'wl1271_spi_read_busy' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:84:5: warning: symbol 'wl1271_cmd_cal_channel_tune' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:107:5: warning: symbol 'wl1271_cmd_cal_update_ref_point' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:132:5: warning: symbol 'wl1271_cmd_cal_p2g' was not declared. Should it be static? drivers/net/wireless/wl12xx/wl1271_cmd.c:153:5: warning: symbol 'wl1271_cmd_cal' was not declared. Should it be static? Reported-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Set the IEEE80211_FCTL_TODS bit in the FC of the null data template. This is a mandatory requirement in specification. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Cc: Vidhya Govindan <vidhya.govindan@nokia.com> Cc: Janne Ylälehto <janne.ylalehto@nokia.com> Reviewed-by: NJanne Ylalehto <janne.ylalehto@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Kalle Valo 提交于
During rename of the driver from wl12xx to wl1251 the spi device name was accidentally left as wl12xx. Rename it to wl1251 which is the proper name of the driver. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Fix the filter configuration to properly work with the two phase filter configuration (prepare_multicast/configure_filter.) Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We cannot be in PS mode when running PLT tests, so we need to make sure we're in active mode. Also, we need to clear up the rx_counter when we stop PLT, otherwise it could cause problems when entering PLT again. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Several memory allocation related failure cases were not properly handled by the driver - the result was that in low memory conditions booting of a corrupted FW could be attempted - and user space would not get proper failure code. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-