Modules: ES1938 driver

This patch fixes the suspend/resume issue I'm having with ESS-Solo1
soundcard. Without this patch I might get after resume message
that kernel is disabling the IRQ5 (soundcard). If there was something
playing it wont continue after resume without this patch.
Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: VIA82xx driver

Added the DXS entry for Clevo D470 laptop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core

Remove kmalloc wrappers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

- Remove vmalloc wrapper
- Add release_and_free_resource() to remove kfree_nocheck() from each driver
  and simplify the code
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ALSA Core,ALSA<-OSS emulation

Remove a global function snd_task_name(), and move it local
to snd-pcm-oss module.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation,PCM Midlevel,Timer Midlevel,ALSA Core

Use the standard getnstimeofday() function instead of ALSA's own one.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove snd_runtime_check() macro.
This macro worsens the readability of codes.  They should be either
normal if() or removable asserts.

Also, the assert displays stack-dump, instead of only the last caller
pointer.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0-modem driver,VIA82xx-modem driver,HDA Codec driver
Signed-off-by: NSasha Khapyorsky <sashakh@alsa-project.org>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Modules: Intel8x0 driver

On my Acer Aspire 3003LCi laptop, the speaker volume is not controlled
by the master control, but by the headphone control. Enabling the
'hp_only' quirk corrects this. The patch below adds this device to the
list of known quirks.
Signed-off-by: NDick Streefland <dick@streefland.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: ICE1724 driver

Remove the restcition of sample rates on Revolution 7.1 board.
This enables the low 8-44kHz sample rates.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added dummay obsoleted module options for backward compatibility
(to reduce possible bugzilla entries :)
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Intel8x0 driver

Suppress the codec warnings during probing of codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove the code for supporting eight cards from the integrated
controller drivers because There Can Be Only One controller of
each type per mainboard.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: Sound Core,PCI drivers

AC97 Kconfig entries broke the ALSA device drivers menu,
so move them to a location where that won't happen,
enabling all device sub-menus to be presented together.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans last ac97 audio/modem codec interception in
initialization procedures (ac97_mixer_new()) and removes obsolete
SHARED_TYPE 'locking' which prevents from AMC codecs to function
correctly.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

dev_class=SNDRV_PCM_CLASS_MODEM for all supported softmodem PCMs
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: YMFPCI driver

This patch adds a new mixer control called 'IEC958 Loop' which makes
it possible to loop digital signals from S/PDIF-in to S/PDIF-out.
Signed-off-by: NGlen Masgai <mimosius@gmx.de>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: ALSA sequencer

Remove the last parameter of snd_seq_timer_set_tick_resolution()
because it is always one.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: RTC timer driver

The check whether rtctimer_freq is a power of two can be done easier
with a simple bit operation.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: RTC timer driver

The rtc_inc variable is never used outside the interrupt handler, and
is always one where it matters, so we can just remove it.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Move the usb_complete_callback() compatibility wrapper out of the
kernel tree.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Move the usb_pipe_needs_resubmit() compatibility wrapper out of the
kernel tree.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Add more comments about other device modes and unsupported devices to
the Roland part of the quirks table.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: au88x0 driver

This patch extends au88x0 AC97 codec access procedures to handle multiple
codecs properly.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: Documentation

Added description for ALC260 codec models in hda-intel driver section.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: HDA Codec driver

Added a new model 'fujitsu' to ALC260 config for Fujitsu S7020.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: USB generic driver

Add a quirk entry for the Hercules DJ Console to ignore timeouts on
some mixer control transfers.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: USB generic driver

Simplify the handling of MIDI quirks by treating an interface without
quirks as a QUIRK_MIDI_STANDARD_INTERFACE.

This also fixes the bug where a MIDI_STANDARD quirk would not be
recognized.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: CMIPCI driver

If possible, use ports in the card's PCI port address range instead of
the legacy ports.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Modules: HDA Intel driver

This patch is to make the Intel HDA code work for NVIDIA azalia controller.

Modified by Takashi Iwai <tiwai@suse.de>
Signed-off-by: NVinod G. <vinodg@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Fix a typo in the last patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

- Fixed surround controls of CMI9761 (model 83) in update_jacks callback.
- Clean up ad1888 and ad1985 update_jacks callbacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: EMU10K1/EMU10K2 driver

Adds left and right front channel outputs using fxbus 8 and 9 and 'Front'
playback and capture volume controls.
Signed-off-by: NMikael Magnusson <mikma@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NNathan Scott <nathans@sgi.com>

set default flags.

SGI-PV: 945242
SGI-Modid: xfs-linux-melb:xfs-kern:24292a
Signed-off-by: NNathan Scott <nathans@sgi.com>

Signed-off-by: NNathan Scott <nathans@sgi.com>

Signed-off-by: NNathan Scott <nathans@sgi.com>

This fixes the x86-64 find_[first|next]_zero_bit() function for the
end-of-range case.  It didn't test for a zero size, and the "rep scas"
would do entirely the wrong thing.
Signed-off-by: NAlexandre Oliva <oliva@lsd.ic.unicamp.br>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Cannot build XFS filesystem support as module with quota support.  It
works only when the XFS filesystem support is compiled into the kernel.
Menuconfig prevents from setting CONFIG_XFS_FS=m and CONFIG_XFS_QUOTA=y.

How to reproduce: configure the XFS filesystem with quota support as
module.  The resulting kernel won't have quota support compiled into
xfs.ko.

Fix: Changing the fs/xfs/Kconfig file from tristate to bool lets you
configure the quota support to be compiled into the XFS module.  The
Makefile-linux-2.6 checks only for CONFIG_XFS_QUOTA=y.
Signed-off-by: NDimitri Puzin <tristan-777@ddkom-online.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NNathan Scott <nathans@sgi.com>