- 05 3月, 2013 1 次提交
-
-
由 Aaron Lu 提交于
ODD is not a common TLA for non-ATA people so they will get confused by its meaning when they are configuring the kernel. This patch fixed this problem by using ODD only after stating what it is. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 21 2月, 2013 1 次提交
-
-
由 Vladimir Barinov 提交于
Add Renesas R-Car on-chip 3Gbps SATA controller driver. Signed-off-by: NVladimir Barinov <vladimir.barinov@cogentembedded.com> [Sergei: few bugs fixed, significant cleanup] Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 14 2月, 2013 1 次提交
-
-
由 Heiko Carstens 提交于
Add s390 to the list of architectures that don' want ATA. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 22 1月, 2013 2 次提交
-
-
由 Kees Cook 提交于
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaron Lu 提交于
The ODD can be enabled for ZPODD if the following three conditions are satisfied: 1 The ODD supports device attention; 2 The platform can runtime power off the ODD through ACPI; 3 The ODD is either slot type or drawer type. For such ODDs, zpodd_init is called and a new structure is allocated for it to store ZPODD related stuffs. And the zpodd_dev_enabled function is used to test if ZPODD is currently enabled for this ODD. A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code. Signed-off-by: NAaron Lu <aaron.lu@intel.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 13 9月, 2012 1 次提交
-
-
由 Mark Langsdorf 提交于
Calxeda highbank SATA phy has intermittent problems bringing up a link with Gen3 drives. Retrying the phy hard reset can work-around this issue, but each reset also disables spread spectrum support. The reset function also needs to reprogram the phy to enable spread spectrum support. Create a new driver based on ahci_platform to support the Calxeda Highbank SATA controller. Signed-off-by: NMark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 18 8月, 2012 1 次提交
-
-
由 Paul Menzel 提交于
Building Linux for an ASUS Eee PC 701 4G with ata2.00: CFA: SILICONMOTION SM223AC, , max UDMA/66 ata2.00: 7815024 sectors, multi 0: LBA ata2.00: configured for UDMA/66 scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 7815024 512-byte logical blocks: (4.00 GB/3.72 GiB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 I followed the advice to not use the deprecated old PATA subsystem ATA/ATAPI/MFM/RLL support (DEPRECATED) ---> and use the ATA subsystem instead. Serial ATA and Parallel ATA drivers ---> Unfortunately I needed several tries to find out, that I needed the SFF menu I had not selected before because I had never heard that term before. I think it would have helped me, to have PATA or legacy IDE in that item’s name. Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 5月, 2012 1 次提交
-
-
由 Rafal Prylowski 提交于
Add PATA host controller driver for ep93xx. Signed-off-by: NRafal Prylowski <prylowski@metasoft.pl> Cc: Joao Ramos <joao.ramos@inov.pt> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 09 1月, 2012 1 次提交
-
-
由 Rob Herring 提交于
CONFIG_OF_IRQ is not available on some platforms and using of_irq_* breaks the build. Since resources are already populated in the platform device, get the irq from there instead. Reported-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NRob Herring <rob.herring@calxeda.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 12月, 2011 1 次提交
-
-
由 David Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 15 10月, 2011 1 次提交
-
-
QDI65x0 controllers are fully supported by pata_legacy driver so remove no longer needed pata_qdi driver. Leave PATA_QDI config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_qdi driver. Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 08 10月, 2011 1 次提交
-
-
由 Pawel Moll 提交于
This patch adds missing #includes, makes the driver selectable on non-PPC OF-enabled platforms and fixes property value accesses to be correct in Little Endian system. Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NPawel Moll <pawel.moll@arm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 19 8月, 2011 1 次提交
-
-
由 Arnaud Patard (Rtp) 提交于
Add basic support for pata on iMX. It has been tested only on imx51. SDMA support will probably be added later so this version supports only PIO. v2: - enable only when needed IORDY - use dev_get_drvdata v3: - add missing clk_put() calls - use platform_get_irq() - fix resume code to avoid disabling IORDY on resume v4: - Remove EXPERIMENTAL and switch to depends on ARCH_MXC - Use devm_kzalloc() - make clock a must-have - Use only 1 ioremap Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
Fix kconfig unmet dependency warning: warning: (PATA_ARASAN_CF && VIDEO_TIMBERDALE && SND_SOC_SH4_SIU) selects DMA_ENGINE which has unmet direct dependencies (DMADEVICES) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 14 3月, 2011 1 次提交
-
-
由 Viresh Kumar 提交于
The Arasan CompactFlash Device Controller has three basic modes of operation: PC card ATA using I/O mode, PC card ATA using memory mode, PC card ATA using true IDE modes. Currently driver supports only True IDE mode. Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
-
- 02 3月, 2011 1 次提交
-
-
由 Sergei Shtylyov 提交于
The driver makes use of the two options (CONFIG_SATA_DWC_[V]DEBUG) to enable the debug output but they both are absent in drivers/ata/Kconfig... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 21 1月, 2011 1 次提交
-
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 1月, 2011 2 次提交
-
-
由 Nick Bowler 提交于
CONFIG_HAVE_PATA_PLATFORM, by virtue of where its defined, has a dependency on CONFG_ATA and CONFIG_ATA_SFF. This causes Kconfig warnings when it is selected by various architectures, such as warning: (ARCH_VEXPRESS && <choice> || ARCH_RPC && <choice> || MACH_VPAC270 && ARCH_PXA || MACH_REALVIEW_PB11MP && ARCH_REALVIEW || MACH_REALVIEW_PBA8 && ARCH_REALVIEW || MACH_REALVIEW_PBX && ARCH_REALVIEW || MACH_BAST_IDE && ARCH_S3C2410 || MACH_ANUBIS && ARCH_S3C2410) selects HAVE_PATA_PLATFORM which has unmet direct dependencies (ATA && ATA_SFF) Since this option is only used to control visibility of the CONFIG_PATA_PLATFORM option and isn't itself visible in the menu, it is straightforward to simply remove these dependencies rather than adjust all the architectures. Signed-off-by: NNick Bowler <nbowler@elliptictech.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sergei Shtylyov 提交于
Commit 28e21c8c (pata_hpt3x2n: Add HPT371N support and other bits) forgot to update the driver's Kconfig entry, heading comment, and module description (that also wrongly claims support of HPT302) which may confuse users... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 06 1月, 2011 1 次提交
-
-
由 David Milburn 提交于
Add support for Acard ATP8620 host controller. Based upon initial version by Jeff Garzik. Signed-off-by: NDavid Milburn <dmilburn@redhat.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 25 12月, 2010 2 次提交
-
-
由 Wolfram Sang 提交于
Found by this build-error if BMDMA is disabled: drivers/ata/pata_mpc52xx.c: In function 'mpc52xx_ata_init_one': drivers/ata/pata_mpc52xx.c:662: error: 'ata_bmdma_interrupt' undeclared (first use in this function) ... Move the Kconfig entry to the proper location as needed since 9a7780c9 (libata-sff: make BMDMA optional) Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Wu Zhangjin 提交于
pata_cs5536 does work on the other platforms(e.g. Loongson, a MIPS variant), so, remove the dependency of X86_32 and fix the building errors under the other platforms via only reserving the X86_32 specific parts for X86_32. pata_amd also supports cs5536 IDE controller, but this one saves about 33k for the compressed kernel image(vmlinuz for MIPS). Signed-off-by: NZhang Le <r0bertz@gentoo.org> Signed-off-by: NChen Jie <chenj@lemote.com> Signed-off-by: NWu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 26 8月, 2010 1 次提交
-
-
Winbond W83759A controller is fully supported by pata_legacy driver so remove no longer needed pata_winbond driver. Leave PATA_WINBOND_VLB config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_winbond driver. Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 02 8月, 2010 2 次提交
-
-
由 Abhilash Kesavan 提交于
Adds support for the Samsung PATA controller. This driver is based on the Libata subsystem and references the earlier patches sent for IDE subsystem. Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by: NSergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Rupjyoti Sarmah 提交于
This patch enables the on-chip DWC SATA controller of the AppliedMicro processor 460EX. Signed-off-by: NRupjyoti Sarmah <rsarmah@appliedmicro.com> Signed-off-by: NMark Miesfeld <mmiesfeld@appliedmicro.com> Signed-off-by: NProdyut Hazarika <phazarika@appliedmicro.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 18 6月, 2010 1 次提交
-
-
由 Marek Vasut 提交于
This patch adds a driver for a harddrive attached to PXA address and data bus. Unlike pata_platform, this driver allows usage of PXA DMA controller, making the transmission speed 3x higher. Signed-off-by: NMarek Vasut <marek.vasut@gmail.com> Acked-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
- 03 6月, 2010 1 次提交
-
-
由 Stefan Richter 提交于
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 26 5月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
Make BMDMA optional depending on new config variable CONFIG_ATA_BMDMA. In Kconfig, drivers are grouped into five groups - non-SFF native, SFF w/ custom DMA interface, SFF w/ BMDMA, PIO-only SFF, and generic fallback / legacy ones. Kconfig and Makefile are reorganized according to the groups and ordered alphabetically inside each group. ata_ioports.bmdma_addr and ata_port.bmdma_prd[_dma] are put into CONFIG_ATA_BMDMA, as are all bmdma related ops, variables and functions. This increase the binary size slightly when BMDMA is enabled but on both native-only and PIO-only configurations the size is slightly reduced. Either way, the size difference is insignificant. This change is more meaningful to signify the separation between SFF and BMDMA and as a tool to verify the separation. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 15 5月, 2010 2 次提交
-
-
由 Tejun Heo 提交于
sata_inic162x no longer uses SFF interface. Move it out of CONFIG_ATA_SFF. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Anton Vorontsov 提交于
This can be used for AHCI-compatible interfaces implemented inside System-On-Chip solutions, or AHCI devices connected via localbus. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 02 3月, 2010 1 次提交
-
-
由 Alan Cox 提交于
This is needed for some unsupported hardware setups on strange 64bit mainboards where crazy stuff has been done like putting flash ata adapters on the LPC bus, or where the real hardware is hidden/confused. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 24 12月, 2009 1 次提交
-
-
由 Carlos R. Mafra 提交于
In March 2008 commit 0ac4a3c2 ("ACPI: fix ATA_ACPI build") made CONFIG_ACPI_DOCK be selected by CONFIG_ATA_ACPI because of a build error when CONFIG_ATA_ACPI=y and CONFIG_ACPI_DOCK=m. However, in September 2008 commit 898b054f ("dock: make dock driver not a module") removed the possibility of having CONFIG_ACPI_DOCK=m and therefore there is no need for selecting it when CONFIG_ATA_ACPI=y. This makes the kernel ~5 Kb smaller for people who don't have a dock by allowing them to not have ACPI_DOCK compiled-in because of ATA_ACPI=y. Signed-off-by: NCarlos R. Mafra <crmafra@aei.mpg.de> Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 09 12月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This is a libata driver for the "macio" IDE controller used on most Apple PowerMac and PowerBooks. It's a libata equivalent of drivers/ide/ppc/pmac.c It supports all the features of its predecessor, including mediabay hotplug and suspend/resume. It should also support module load/unload. The timing calculations have been simplified to use pre-calculated tables compared to drivers/ide/pmac.c and it uses the new mediabay interface provided by a previous patch. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NTejun Heo <tj@kernel.org>
-
- 04 12月, 2009 1 次提交
-
-
由 Alan Cox 提交于
We were never able to get docs for this out of Toshiba for years. Dave Barnes produced a NetBSD driver however and from that we can fill in the needed tables. As we correct the PCI identifiers a bit also update the old ide generic driver at the same time so it stays compiling. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 03 12月, 2009 2 次提交
-
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Robert Hancock 提交于
Remove the experimental tag on Parallel ATA drivers. Though some of the individual PATA drivers are still marked as experimental, as a group they can hardly be considered to be, given they've been used in various distros for some time. Signed-off-by: NRobert Hancock <hancockrwd@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 18 9月, 2009 1 次提交
-
-
由 John(Jung-Ik) Lee 提交于
This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane <ericu@google.com>. Signed-off-by: NJohn(Jung-Ik) Lee <jilee@google.com> Reviewed-by: NGrant Grundler <grundler@google.com> Reviewed-by: NGwendal Gringo <gwendal@google.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 02 9月, 2009 2 次提交
-
-
由 Alan Cox 提交于
From: Alan Cox <alan@linux.intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Robert Hancock 提交于
This patch improve libata's output for error/notification messages to allow easier comprehension and debugging: When ATAPI commands issued through the SCSI layer fail, use SCSI functions to print the CDB in human-readable form instead of just dumping out the CDB in hex. Print out the name of the failed command (as defined by the ATA specification) in error handling output along with the raw register contents. When reporting status of ACPI taskfile commands executed on resume, also output the names of the commands being executed (or not) in readable form. Since the extra data for printing command names increases kernel size slightly, a config option has been added to allow disabling command name output (as well as some of the error register parsing) for those highly sensitive to kernel text size. Signed-off-by: NRobert Hancock <hancockrwd@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 6月, 2009 1 次提交
-
-
由 Sergey Matyukevich 提交于
This patch provides PATA driver for CompactFlash interface in True IDE mode on AT91SAM9260 SoC. Signed-off-by: NSergey Matyukevich <geomatsi@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-