The basic routines and defines for AppArmor policy.  AppArmor policy
is defined by a few basic components.
      profiles - the basic unit of confinement contain all the information
                 to enforce policy on a task

                 Profiles tend to be named after an executable that they
                 will attach to but this is not required.
      namespaces - a container for a set of profiles that will be used
                 during attachment and transitions between profiles.
      sids - which provide a unique id for each profile
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

AppArmor policy is loaded in a platform independent flattened binary
stream.  Verify and unpack the data converting it to the internal
format needed for enforcement.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

ipc:
AppArmor ipc is currently limited to mediation done by file mediation
and basic ptrace tests.  Improved mediation is a wip.

rlimits:
AppArmor provides basic abilities to set and control rlimits at
a per profile level.  Only resources specified in a profile are controled
or set.  AppArmor rules set the hard limit to a value <= to the current
hard limit (ie. they can not currently raise hard limits), and if
necessary will lower the soft limit to the new hard limit value.

AppArmor does not track resource limits to reset them when a profile
is left so that children processes inherit the limits set by the
parent even if they are not confined by the same profile.

Capabilities:  AppArmor provides a per profile mask of capabilities,
that will further restrict.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

AppArmor hooks to interface with the LSM, module parameters and module
initialization.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Kconfig and Makefiles to enable configuration and building of AppArmor.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

AppArmor routines for controling domain transitions, which can occur at
exec or through self directed change_profile/change_hat calls.

Unconfined tasks are checked at exec against the profiles in the confining
profile namespace to determine if a profile should be attached to the task.

Confined tasks execs are controlled by the profile which provides rules
determining which execs are allowed and if so which profiles should be
transitioned to.

Self directed domain transitions allow a task to request transition
to a given profile.  If the transition is allowed then the profile will
be applied, either immeditately or at exec time depending on the request.
Immeditate self directed transitions have several security limitations
but have uses in setting up stub transition profiles and other limited
cases.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

AppArmor does files enforcement via pathname matching.  Matching is done
at file open using a dfa match engine.  Permission is against the final
file object not parent directories, ie. the traversal of directories
as part of the file match is implicitly allowed.  In the case of nonexistant
files (creation) permissions are checked against the target file not the
directory.  eg. In case of creating the file /dir/new, permissions are
checked against the match /dir/new not against /dir/.

The permissions for matches are currently stored in the dfa accept table,
but this will change to allow for dfa reuse and also to allow for sharing
of wider accept states.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

The /proc/<pid>/attr/* interface is used for process introspection and
commands.  While the apparmorfs interface is used for global introspection
and loading and removing policy.

The interface currently only contains the files necessary for loading
policy, and will be extended in the future to include sysfs style
single per file introspection inteface.

The old AppArmor 2.4 interface files have been removed into a compatibility
patch, that distros can use to maintain backwards compatibility.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

A basic dfa matching engine based off the dfa engine in the Dragon
Book.  It uses simple row comb compression with a check field.

This allows AppArmor to do pattern matching in linear time, and also
avoids stack issues that an nfa based engine may have.  The dfa
engine uses a byte based comparison, with all values being valid.
Any potential character encoding are handled user side when the dfa
tables are created.  By convention AppArmor uses \0 to separate two
dependent path matches since \0 is not a valid path character
(this is done in the link permission check).

The dfa tables are generated in user space and are verified at load
time to be internally consistent.

There are several future improvements planned for the dfa engine:
* The dfa engine may be converted to a hybrid nfa-dfa engine, with
  a fixed size limited stack.  This would allow for size time
  tradeoffs, by inserting limited nfa states to help control
  state explosion that can occur with dfas.
* The dfa engine may pickup the ability to do limited dynamic
  variable matching, instead of fixing all variables at policy
  load time.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

AppArmor contexts attach profiles and state to tasks, files, etc. when
a direct profile reference is not sufficient.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Update lsm_audit for AppArmor specific data, and add the core routines for
AppArmor uses for auditing.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Miscellaneous functions and defines needed by AppArmor, including
the base path resolution routines.
Signed-off-by: NJohn Johansen <john.johansen@canonical.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>

Commit d74725b9 "TOMOYO: Use callback for updating entries." broke
tomoyo_domain_quota_is_ok() by counting deleted entries. It needs to
count non-deleted entries.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>

execmod "could" show up on non regular files and non chr files.  The current
implementation would actually make these checks against non-existant bits
since the code assumes the execmod permission is same for all file types.
To make this line up for chr files we had to define execute_no_trans and
entrypoint permissions.  These permissions are unreachable and only existed
to to make FILE__EXECMOD and CHR_FILE__EXECMOD the same.  This patch drops
those needless perms as well.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

kernel can dynamically remap perms.  Drop the open lookup table and put open
in the common file perms.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Currently there are a number of applications (nautilus being the main one) which
calls access() on files in order to determine how they should be displayed.  It
is normal and expected that nautilus will want to see if files are executable
or if they are really read/write-able.  access() should return the real
permission.  SELinux policy checks are done in access() and can result in lots
of AVC denials as policy denies RWX on files which DAC allows.  Currently
SELinux must dontaudit actual attempts to read/write/execute a file in
order to silence these messages (and not flood the logs.)  But dontaudit rules
like that can hide real attacks.  This patch addes a new common file
permission audit_access.  This permission is special in that it is meaningless
and should never show up in an allow rule.  Instead the only place this
permission has meaning is in a dontaudit rule like so:

dontaudit nautilus_t sbin_t:file audit_access

With such a rule if nautilus just checks access() we will still get denied and
thus userspace will still get the correct answer but we will not log the denial.
If nautilus attempted to actually perform one of the forbidden actions
(rather than just querying access(2) about it) we would still log a denial.
This type of dontaudit rule should be used sparingly, as it could be a
method for an attacker to probe the system permissions without detection.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

SELinux needs to pass the MAY_ACCESS flag so it can handle auditting
correctly.  Presently the masking of MAY_* flags is done in the VFS.  In
order to allow LSMs to decide what flags they care about and what flags
they don't just pass them all and the each LSM mask off what they don't
need.  This patch should contain no functional changes to either the VFS or
any LSM.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Currently MAY_ACCESS means that filesystems must check the permissions
right then and not rely on cached results or the results of future
operations on the object.  This can be because of a call to sys_access() or
because of a call to chdir() which needs to check search without relying on
any future operations inside that dir.  I plan to use MAY_ACCESS for other
purposes in the security system, so I split the MAY_ACCESS and the
MAY_CHDIR cases.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Move the reading of ocontext type data out of policydb_read() in a separate
function ocontext_read()
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

move genfs read functionality out of policydb_read() and into a new
function called genfs_read()
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

hashtab_create() only returns NULL on allocation failures to -ENOMEM is
appropriate here.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

The original code always returned -1 (-EPERM) on error.  The new code
returns either -ENOMEM, or -EINVAL or it propagates the error codes from
lower level functions next_entry() or hashtab_insert().

next_entry() returns -EINVAL.
hashtab_insert() returns -EINVAL, -EEXIST, or -ENOMEM.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

It's better to propagate the error code from avtab_init() instead of
returning -1 (-EPERM).  It turns out that avtab_init() never fails so
this patch doesn't change how the code runs but it's still a clean up.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Originally cond_read_node() returned -1 (-EPERM) on errors which was
incorrect.  Now it either propagates the error codes from lower level
functions next_entry() or cond_read_av_list() or it returns -ENOMEM or
-EINVAL.

next_entry() returns -EINVAL.
cond_read_av_list() returns -EINVAL or -ENOMEM.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

After this patch cond_read_av_list() no longer returns -1 for any
errors.  It just propagates error code back from lower levels.  Those can
either be -EINVAL or -ENOMEM.

I also modified cond_insertf() since cond_read_av_list() passes that as a
function pointer to avtab_read_item().  It isn't used anywhere else.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

These are passed back when the security module gets loaded.

The original code always returned -1 (-EPERM) on error but after this
patch it can return -EINVAL, or -ENOMEM or propagate the error code from
cond_read_node().  cond_read_node() still returns -1 all the time, but I
fix that in a later patch.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

The avtab_read_item() function tends to return -1 as a default error
code which is wrong (-1 means -EPERM).  I modified it to return
appropriate error codes which is -EINVAL or the error code from
next_entry() or insertf().

next_entry() returns -EINVAL.
insertf() is a function pointer to either avtab_insert() or
cond_insertf().
avtab_insert() returns -EINVAL, -ENOMEM, and -EEXIST.
cond_insertf() currently returns -1, but I will fix it in a later patch.

There is code in avtab_read() which translates the -1 returns from
avtab_read_item() to -EINVAL. The translation is no longer needed, so I
removed it.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NStephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

This fix a little code style issue deleting a space between a function
name and a open parenthesis.
Signed-off-by: NChihau Chau <chihau@gmail.com>
Acked-by: NAndrew G. Morgan <morgan@kernel.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

lookup_one_len increments dentry reference count which is not decremented
when the create operation fails. This can cause a kernel BUG at
fs/dcache.c:676 at unmount time. Also error code returned when new_inode()
fails was replaced with more appropriate -ENOMEM.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@sophos.com>
Acked-by: NSerge E. Hallyn <serge@hallyn.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NJames Morris <jmorris@namei.org>

The default for llseek will change to no_llseek,
so selinuxfs needs to add explicit .llseek
assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: NJames Morris <jmorris@namei.org>

The default for llseek will change to no_llseek,
so securityfs users need to add explicit .llseek
assignments. Since we're dealing with regular
files from a VFS perspective, use generic_file_llseek.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

TOMOYO does not deal offset pointer. Thus seek operation makes
no sense. Changing default seek operation from default_llseek()
to no_llseek() might break some applications. Thus, explicitly
set noop_llseek().
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>

Make the security extended attributes names global. Updated to move
the remaining Smack xattrs.
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Acked-by: NSerge Hallyn <serue@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

In commit bb952bb9 there was the accidental
deletion of a statement from call_sbin_request_key() to render the process
keyring ID to a text string so that it can be passed to /sbin/request-key.

With gcc 4.6.0 this causes the following warning:

  CC      security/keys/request_key.o
security/keys/request_key.c: In function 'call_sbin_request_key':
security/keys/request_key.c:102:15: warning: variable 'prkey' set but not used

This patch reinstates that statement.

Without this statement, /sbin/request-key will get some random rubbish from the
stack as that parameter.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

keyctl_describe_key() turns the key reference it gets into a usable key pointer
and assigns that to a variable called 'key', which it then ignores in favour of
recomputing the key pointer each time it needs it.  Make it use the precomputed
pointer instead.

Without this patch, gcc 4.6 reports that the variable key is set but not used:

	building with gcc 4.6 I'm getting a warning message:
	 CC      security/keys/keyctl.o
	security/keys/keyctl.c: In function 'keyctl_describe_key':
	security/keys/keyctl.c:472:14: warning: variable 'key' set but not used
Reported-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

Commit 1dae08c "TOMOYO: Add interactive enforcing mode." forgot to register
poll() hook. As a result, /usr/sbin/tomoyo-queryd was doing busy loop.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>

Use shorter name in order to make it easier to fit 80 columns limit.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>

Split tomoyo_write_profile() into several functions.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NJames Morris <jmorris@namei.org>