Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 25 6月, 2015 1 次提交
  3. 20 6月, 2015 1 次提交
  5. 17 4月, 2015 1 次提交
  7. 03 4月, 2015 1 次提交
  9. 24 1月, 2015 1 次提交
  11. 11 12月, 2014 2 次提交
  13. 09 8月, 2014 1 次提交
  15. 07 6月, 2014 1 次提交
  17. 04 4月, 2014 1 次提交
  19. 23 7月, 2013 1 次提交
    • Z
      rtc: Keep system awake until all expired RTC timers are handled · 14d0e347
      由 Zoran Markovic 提交于 
      Current implementation of RTC interface allows for system suspend to
occur in the following cases:
(a) if a timer is set in the past and rtc_timer_do_work() is scheduled
to handle it, and
(b) if rtc_timer_do_work() is called to handle expired timers whose
handlers implement a preemption point.

A pending suspend request may be honoured in the above cases causing
timer handling to be delayed until after the next resume. This is
undesirable since timer handlers may have time-critical code to execute.

This patch makes sure that the system stays awake until all expired
timers are handled.

Note that all calls to pm_stay_awake() are eventually paired with
the single pm_relax() call in rtc_timer_do_work(), which is launched
using schedule_work().

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arve Hjonnevag <arve@android.com>
Cc: Todd Poynor <toddpoynor@google.com>
Signed-off-by: NZoran Markovic <zoran.markovic@linaro.org>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      14d0e347
  21. 04 7月, 2013 2 次提交
  23. 07 2月, 2013 1 次提交
  25. 09 8月, 2012 1 次提交
    • N
      RTC: Avoid races between RTC alarm wakeup and suspend. · 7523ceed
      由 NeilBrown 提交于 
      If an RTC alarm fires just as suspend is happening, it is possible for
suspend to complete and the alarm to be missed.

To avoid the race, we must register the event with the PM core.

As the event is made visible to userspace through a thread which is
only scheduled by the interrupt, we need a pm_stay_awake/pm_relax
pair preventing suspend from the interrupt until the thread completes
its work.

This makes the pm_wakeup_event() call in cmos_interrupt unnecessary as
it provides suspend protection for all RTCs that use rtc_update_irq.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      7523ceed
  27. 16 3月, 2012 1 次提交
  29. 27 1月, 2012 3 次提交
    • R
      rtc: Disable the alarm in the hardware (v2) · 41c7f742
      由 Rabin Vincent 提交于 
      Currently, the RTC code does not disable the alarm in the hardware.

This means that after a sequence such as the one below (the files are in the
RTC sysfs), the box will boot up after 2 minutes even though we've
asked for the alarm to be turned off.

	# echo $((`cat since_epoch`)+120) > wakealarm
	# echo 0 > wakealarm
	# poweroff

Fix this by disabling the alarm when there are no timers to run.

The original version of this patch was reverted. This version
disables the irq directly instead of setting a disabled timer
in the future.

Cc: stable@kernel.org
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
[Merged in the second revision from Rabin]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      41c7f742
    • N
      rtc: Expire alarms after the time is set. (v2) · 5f9679d2
      由 NeilBrown 提交于 
      If the alarm time programming in the rtc is ever in the past, it won't fire,
and any other alarm will be queued after it so they won't fire either.

So any time that the alarm might be in the past, we need to trigger
the irq handler to ensure the old alarm is cleared and the timer queue
is fully in the future.

This is done whenever the RTC clock is set.

This is the second revision of this patch, which was earlier reverted.
This version avoids the initialization problem, which is handled by
a different patch.
Tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NNeilBrown <neilb@suse.de>
[Remove problematic initialization change, update commit log, also
catch set_mmss case -jstultz]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      5f9679d2
    • J
      rtc: Avoid setting alarm to a time in the past · bd729d72
      由 John Stultz 提交于 
      In some cases at boot up, the RTC alarm may be set in the past,
but still have the enabled flag on. This was causing problems,
because we would then enqueue the alarm into the timerqueue,
but it would never fire. This would clog up the timerqueue
and keep other alarms from working.

The fix is to check the alarm against the current rtc time at
boot and avoid enqueueing the alarm if it is in the past.
Reported-by: NNeilBrown <neilb@suse.de>
Tested-by: NNeilBrown <neilb@suse.de>
Tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      bd729d72
  31. 11 1月, 2012 1 次提交
  33. 04 1月, 2012 2 次提交
    • L
      Revert "rtc: Expire alarms after the time is set." · f423fc62
      由 Linus Torvalds 提交于 
      This reverts commit 93b2ec01.

The call to "schedule_work()" in rtc_initialize_alarm() happens too
early, and can cause oopses at bootup

Neil Brown explains why we do it:

  "If you set an alarm in the future, then shutdown and boot again after
   that time, then you will end up with a timer_queue node which is in
   the past.

   When this happens the queue gets stuck.  That entry-in-the-past won't
   get removed until and interrupt happens and an interrupt won't happen
   because the RTC only triggers an interrupt when the alarm is "now".

   So you'll find that e.g.  "hwclock" will always tell you that
   'select' timed out.

   So we force the interrupt work to happen at the start just in case."

and has a patch that convert it to do things in-process rather than with
the worker thread, but right now it's too late to play around with this,
so we just revert the patch that caused problems for now.
Reported-by: NSander Eikelenboom <linux@eikelenboom.it>
Requested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Requested-by: NJohn Stultz <john.stultz@linaro.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f423fc62
    • L
      Revert "rtc: Disable the alarm in the hardware" · 157e8bf8
      由 Linus Torvalds 提交于 
      This reverts commit c0afabd3.

It causes failures on Toshiba laptops - instead of disabling the alarm,
it actually seems to enable it on the affected laptops, resulting in
(for example) the laptop powering on automatically five minutes after
shutdown.

There's a patch for it that appears to work for at least some people,
but it's too late to play around with this, so revert for now and try
again in the next merge window.

See for example

	http://bugs.debian.org/652869

Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra)
Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500)
Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830)
Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>  (Toshiba Portege R830)
Cc: Jonathan Nieder <jrnieder@gmail.com>
Requested-by: NJohn Stultz <john.stultz@linaro.org>
Cc: stable@kernel.org  # for the versions that applied this
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      157e8bf8
  35. 14 12月, 2011 1 次提交
    • N
      rtc: Expire alarms after the time is set. · 93b2ec01
      由 NeilBrown 提交于 
      If the alarm time programming in the rtc is ever in the past, it won't fire,
and any other alarm will be queued after it so they won't fire either.

So any time that the alarm might be in the past, we need to trigger
the irq handler to ensure the old alarm is cleared and the timer queue
is fully in the future.

This can happen:
 - when we first initialise the alarm
 - when we set the time in the rtc.

so follow both of these by scheduling the timer work function.

CC: stable@kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
[Also catch set_mmss case -jstultz]
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      93b2ec01
  37. 23 11月, 2011 1 次提交
    • R
      rtc: Disable the alarm in the hardware · c0afabd3
      由 Rabin Vincent 提交于 
      Currently, the RTC code does not disable the alarm in the hardware.

This means that after a sequence such as the one below (the files are in the
RTC sysfs), the box will boot up after 2 minutes even though we've
asked for the alarm to be turned off.

	# echo $((`cat since_epoch`)+120) > wakealarm
	# echo 0 > wakealarm
	# poweroff

Fix this by disabling the alarm when there are no timers to run.

Cc: stable@kernel.org
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      c0afabd3
  39. 01 11月, 2011 1 次提交
  41. 11 8月, 2011 1 次提交
    • J
      rtc: Fix RTC PIE frequency limit · 938f97bc
      由 John Stultz 提交于 
      Thomas earlier submitted a fix to limit the RTC PIE freq, but
picked 5000Hz out of the air. Willy noticed that we should
instead use the 8192Hz max from the rtc man documentation.

Cc: Willy Tarreau <w@1wt.eu>
Cc: stable@kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      938f97bc
  43. 27 7月, 2011 6 次提交
  45. 02 6月, 2011 1 次提交
  47. 31 3月, 2011 1 次提交
  49. 30 3月, 2011 1 次提交
    • J
      RTC: Fix early irqs caused by calling rtc_set_alarm too early · f6d5b331
      由 John Stultz 提交于 
      When we register an rtc device at boot, we read the alarm value
in hardware and set the rtc device's aie_timer to that value.

The initial method to do this was to simply call rtc_set_alarm()
with the value read from hardware. However, this may cause problems
as rtc_set_alarm may enable interupts, and the RTC alarm might fire,
which can cause invalid pointer dereferencing since the RTC registration
is not complete.

This patch solves the issue by initializing the rtc_device.aie_timer
y hand via rtc_initialize_alarm(). This avoids any calls to the RTC
hardware which might enable interrupts too early.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
Reported-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      f6d5b331
  51. 10 3月, 2011 1 次提交
    • J
      RTC: Initialize kernel state from RTC · f44f7f96
      由 John Stultz 提交于 
      Mark Brown pointed out a corner case: that RTC alarms should
be allowed to be persistent across reboots if the hardware
supported it.

The rework of the generic layer to virtualize the RTC alarm
virtualized much of the alarm handling, and removed the
code used to read the alarm time from the hardware.

Mark noted if we want the alarm to be persistent across
reboots, we need to re-read the alarm value into the
virtualized generic layer at boot up, so that the generic
layer properly exposes that value.

This patch restores much of the earlier removed
rtc_read_alarm code and wires it in so that we
set the kernel's alarm value to what we find in the
hardware at boot time.

NOTE: Not all hardware supports persistent RTC alarm state across
system reset. rtc-cmos for example will keep the alarm time, but
disables the AIE mode irq. Applications should not expect the RTC
alarm to be valid after a system reset. We will preserve what
we can, to represent the hardware state at boot, but its not
guarenteed.

Further, in the future, with multiplexed RTC alarms, the
soonest alarm to fire may not be the one set via the /dev/rt
ioctls. So an application may set the alarm with RTC_ALM_SET,
but after a reset find that RTC_ALM_READ returns an earlier
time. Again, we preserve what we can, but applications should
not expect the RTC alarm state to persist across a system reset.

Big thanks to Mark for pointing out the issue!
Thanks also to Marcelo for helping think through the solution.

CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: rtc-linux@googlegroups.com
Reported-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      f44f7f96
  53. 18 2月, 2011 2 次提交
  55. 04 2月, 2011 1 次提交
  57. 22 1月, 2011 1 次提交