- 20 2月, 2018 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0, not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2 constant and adds missing HDMI_I2S_SEL_DATA0. The value of bit field selecting SDATA_1 (pin_sel_3) is also changed, so it is 3 as suggested in the Exynos TRMs. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 23 11月, 2017 1 次提交
-
-
由 Ville Syrjälä 提交于
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from 3D to 2D mode in a timely fashion if the source simply stops sending the HDMI infoframe. The suggested workaround is to keep sending the infoframe even when strictly not necessary (ie. no VIC and no S3D). HDMI 1.4 does allow for this behaviour, stating that sending the infoframe is optional in this case. The infoframe was first specified in HDMI 1.4, so in theory sinks predating that may not appreciate us sending an uknown infoframe their way. To avoid regressions let's try to determine if the sink supports the infoframe or not. Unfortunately there's no direct way to do that, so instead we'll just check if we managed to parse any HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the sink will accept the infoframe. Also if the EDID contains the HDMI 2.0 HDMI Forum VSDB we can assume the sink is prepared to receive the infoframe. v2: Fix getting has_hdmi_infoframe from display_info Always fail constructing the infoframe if the display possibly can't handle it Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NShashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com
-
- 26 10月, 2017 4 次提交
-
-
由 Sylwester Nawrocki 提交于
The hdmi-codec interface added in this patch is required to properly support HDMI audio. Currently the audio part of the SoC internal HDMI transmitter is configured with fixed values, which makes HDMI audio working by chance, only on boards having an external audio codec connected in parallel with the HDMI audio transmitter's input I2S interface. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Daniel Drake 提交于
Configuration details from Samsung. This enables 1366x768@60Hz, which also needs the 256px timing hack to work around a mixer limitation. Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> [a.hajda@samsung.com: rebased onto proposed patchset] Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
MIXER in SoCs prior to Exynos5420 supports only 4 video modes: 720x480, 720x576, 1280x720, 1920x1080. Support for other modes can be enabled by manipulating timings of HDMI. To do it adjusted_mode should contain actual mode set on crtc. With this patch it is possible to enable 1024x768 and 1280x1024 modes in MIXER. Suggested-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Display mode is preserved in CRTC state, there is no need to keep local copy of it. Moreover since HDMI should configure registers according to requested mode, use it instead of adjusted_mode, which should contain mode produced by CRTC - functionally it does not change anything, but subsequent patches will make the difference. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 20 9月, 2017 1 次提交
-
-
由 Maciej Purski 提交于
Function hdmi_mode_fixup() used bare list_for_each entry, which was unsafe and caused memory corruption detected by kasan. It now uses drm_for_each_connector_iter macro, which is now recommended by the documentation and safe. Signed-off-by: NMaciej Purski <m.purski@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 25 8月, 2017 1 次提交
-
-
由 Andrzej Hajda 提交于
All encoders share the same code to set encoders possible_crtcs field. The patch creates helper to abstract out this code. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 08 8月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.chAcked-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NArchit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NShawn Guo <shawnguo@kernel.org> Acked-by: NShawn Guo <shawnguo@kernel.org> Acked-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NVincent Abriou <vincent.abriou@st.com>
-
- 27 7月, 2017 3 次提交
-
-
由 Arnd Bergmann 提交于
The rework of the exynos DRM clock handling introduced warnings for configurations that have CONFIG_PM disabled: drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function] static void hdmi_clk_disable_gates(struct hdmi_context *hdata) ^~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function] static int hdmi_clk_enable_gates(struct hdmi_context *hdata) The problem is that the PM functions themselves are inside of an #ifdef, but some functions they call are not. This patch removes the #ifdef and instead marks the PM functions as __maybe_unused, which is a more reliable way to get it right. Link: https://patchwork.kernel.org/patch/8436281/ Fixes: 9be7e989 ("drm/exynos/hdmi: clock code re-factoring") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely powered off and for example Odroid-U3 cannot disable TV power domain when HDMI cable is unplugged. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com> Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order") Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Arvind Yadav 提交于
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 12294 1192 0 13486 34ae drivers/gpu/drm/exynos/exynos_hdmi.o File size after constify hdmi_match_types. text data bss dec hex filename 13318 176 0 13494 34b6 drivers/gpu/drm/exynos/exynos_hdmi.o Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 15 7月, 2017 1 次提交
-
-
由 Shashank Sharma 提交于
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
-
- 01 6月, 2017 1 次提交
-
-
由 Andrzej Hajda 提交于
Hardware require that MIXER(crtc) should be disabled prior to HDMI(encoder). It was achieved by disabling crtc from encoder disable callback, bypassing drm core. As a result drm core tried to call vblank related routines on disabled crtc. The patch fixes it by simplifying hdmi_disable routine - now it only cancels hotplug worker. Hardware will be disabled in proper moment during pipe clock disable. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 11 4月, 2017 1 次提交
-
-
由 Hans Verkuil 提交于
Implement the CEC notifier support to allow CEC drivers to be informed when there is a new physical address. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Tested-by: NMarek Szyprowski <m.szyprowski@samsung.com> Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Acked-by: NKrzysztof Kozlowski <krzk@kernel.org> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 17 2月, 2017 1 次提交
-
-
由 Laurent Pinchart 提交于
The drm driver .load() operation is prone to race conditions as it initializes the driver after registering the device nodes. Its usage is deprecated, inline it in the probe function and call drm_dev_alloc() and drm_dev_register() explicitly. For consistency inline the .unload() handler in the remove function as well. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: NSean Paul <seanpaul@chromium.org> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NDaniel Stone <daniels@collabora.com> Acked-by: NInki Dae <inki.dae@samsung.com>
-
- 08 2月, 2017 1 次提交
-
-
由 Shawn Guo 提交于
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. As the result, exynos_drm_crtc_enable[disable]_vblank() become static functions. They are moved around a bit to save forward declaration though. Also while at it, we move one step further to kill exynos_drm_crtc_from_pipe() completely by updating hdmi_bind() a bit. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Inki Dae <inki.dae@samsung.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-9-git-send-email-shawnguo@kernel.org
-
- 07 2月, 2017 4 次提交
-
-
由 Andrzej Hajda 提交于
On TM2/TM2e platforms HDMI output is connected to MHL bridge SiI8620. To allow configure UltraHD modes on the bridge and to eliminate unsupported modes this bridge should be attached to drm_encoder implemented in exynos_hdmi. Changelog v1: - fix drm_attach_bridge argument. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Current settings for 27MHz and 27.027MHz do not work. Use the settings from vendor code instead. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
VSI infoframe registers address space is non-contiguous, so infoframe write should be split into two chunks. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
297MHz is used by Ultra HD modes. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 05 12月, 2016 1 次提交
-
-
由 Andrzej Hajda 提交于
Use core helpers to generate infoframes and generate vendor frame if necessary. Changelog: - changed 'ret >= 0' checks to '!ret' Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 25 11月, 2016 1 次提交
-
-
由 Arvind Yadav 提交于
Free memory mapping, if hdmi_probe is not successful. Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 30 9月, 2016 3 次提交
-
-
由 Milo Kim 提交于
The helper, devm_regulator_bulk_get() initializes the consumer as NULL, so this code can be ignored. Signed-off-by: NMilo Kim <woogyom.kim@gmail.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Milo Kim 提交于
Paring DT properties and getting PHY IO (memory mapped or I2C) in one function. Signed-off-by: NMilo Kim <woogyom.kim@gmail.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Milo Kim 提交于
Paring DT properties and getting the I2C adapter in one function. Signed-off-by: NMilo Kim <woogyom.kim@gmail.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 15 7月, 2016 1 次提交
-
-
由 Peter Chen 提交于
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NPeter Chen <peter.chen@nxp.com> Signed-off-by: NSean Paul <seanpaul@chromium.org>
-
- 10 6月, 2016 1 次提交
-
-
由 Boris Brezillon 提交于
We have 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementations and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-5-git-send-email-boris.brezillon@free-electrons.com
-
- 17 5月, 2016 1 次提交
-
-
由 Dan Carpenter 提交于
Smatch warns that the if statement isn't indented. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160512195457.GA19095@mwanda
-
- 10 5月, 2016 2 次提交
-
-
由 Javier Martinez Canillas 提交于
The regulators may not be available just because their driver's probe function was just not executed and so the regulators not registered. So, in this case the Exynos HDMI driver should not print logs since a -EPROBE_DEFER is not really an error and that will just pollute the kernel log and confuse users. This patch prevents the following misleading messages to be printed: [ 1.443638] [drm:hdmi_probe] *ERROR* failed to get regulators [ 1.449326] [drm:hdmi_probe] *ERROR* hdmi_resources_init failed Reported-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI-PHY clock should be accessible from other components in the pipeline. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 30 4月, 2016 9 次提交
-
-
由 Marek Szyprowski 提交于
Simplify code by replacing custom code by generic helper. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI registry dump unnecessary spoils console and is not very helpful. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
To ensure HDMI-PHY reprogramming will not affect HDMI the latter should be reset. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI-PHY power off bit defaults to 0 in older HDMI versions. In case of Exynos5433 it defaults to 1. To make code consistent across all versions this bit is always unset/set in power on/off sequences. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
Proper PHY configuration should be as follow: 1. set HDMI clock parents to OSCCLK. 2. reconfigure PHY. 3. set HDMI clock parents to PHY. 4. wait for PLL stabilization. The patch fixes it and consolidates the code. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI on Exynos5433 differs from previous versions: - different HDMI-PHY settings, - different clocks, - SYSREG registers for enabling reference clock, - MODE_SET register in HDMI-PHY. It is distinguished from other variants by different compatible string. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
There is no point in rewriting default values, as the IP is reset anyway. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
The patch performs following clean-ups: - remove unnecessary white spaces, - remove obvious comments, - fix tabulations, - remove NULL initializators, - re-order driver data. The patch does not change driver's behavior. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Andrzej Hajda 提交于
HDMI-PHY configurations are stored as array pointer and count pair, we can re-use existing helpers to simplify their initialization. Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-