We need to reserve a context from KVM to make sure we have our own
segment space. While we did that split for Book3S_64 already, 32 bit
is still outstanding.

So let's split it now.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This is the code that will later be used instead of book3s_64_slb.S. It
does the last step of guest entry and the first generic steps of guest
exiting, once we have determined the interrupt is a KVM interrupt.

It also reads the last used instruction from the guest virtual address
space if necessary, to speed up that path.

The new thing about this file is that it makes use of generic long load
and store functions and calls a macro to fill in the actual segment
switching code. That still needs to be done differently for book3s_32 and
book3s_64.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Later in this series we will move the current segment switch code to
generic code and make that call hooks for the specific sub-archs (32
vs. 64 bit). This is the hook for 32 bits.

It enabled the entry and exit code to swap segment registers with
values from the shadow cpu structure.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In order to support 32 bit Book3S, we need to add code to enable our
shadow MMU to actually add shadow PTEs. This is the module enabling
that support.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

We have quite some code that can be used by Book3S_32 and Book3S_64 alike,
so let's call it "Book3S" instead of "Book3S_64", so we can later on
use it from the 32 bit port too.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since gfn is not changed in the for loop, we do not need to call
gfn_to_memslot_unaliased() under the loop, and it is safe to move
it out.
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Nobody use gva_to_page() anymore, get rid of it.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove unused varialbe in rmap_next()
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make use of is_large_pte() instead of checking PT_PAGE_SIZE_MASK
bit directly.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Move first pte address calculation out of loop to save some cycles.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When CPU_UP_CANCELED, hardware_enable() has not been called at the CPU
which is going up because raw_notifier_call_chain(CPU_ONLINE)
has not been called for this cpu.

Drop the handling for CPU_UP_CANCELED.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Since commit bf47a760, we no longer handle ptes with the global bit
set specially, so there is no reason to distinguish between shadow pages
created with cr4.gpe set and clear.

Such tracking is expensive when the guest toggles cr4.pge, so drop it.
Signed-off-by: NAvi Kivity <avi@redhat.com>

The RCU/SRCU API have already changed for proving RCU usage.

I got the following dmesg when PROVE_RCU=y because we used incorrect API.
This patch coverts rcu_deference() to srcu_dereference() or family API.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
arch/x86/kvm/mmu.c:3020 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
2 locks held by qemu-system-x86/8550:
 #0:  (&kvm->slots_lock){+.+.+.}, at: [<ffffffffa011a6ac>] kvm_set_memory_region+0x29/0x50 [kvm]
 #1:  (&(&kvm->mmu_lock)->rlock){+.+...}, at: [<ffffffffa012262d>] kvm_arch_commit_memory_region+0xa6/0xe2 [kvm]

stack backtrace:
Pid: 8550, comm: qemu-system-x86 Not tainted 2.6.34-rc4-tip-01028-g939eab1 #27
Call Trace:
 [<ffffffff8106c59e>] lockdep_rcu_dereference+0xaa/0xb3
 [<ffffffffa012f6c1>] kvm_mmu_calculate_mmu_pages+0x44/0x7d [kvm]
 [<ffffffffa012263e>] kvm_arch_commit_memory_region+0xb7/0xe2 [kvm]
 [<ffffffffa011a5d7>] __kvm_set_memory_region+0x636/0x6e2 [kvm]
 [<ffffffffa011a6ba>] kvm_set_memory_region+0x37/0x50 [kvm]
 [<ffffffffa015e956>] vmx_set_tss_addr+0x46/0x5a [kvm_intel]
 [<ffffffffa0126592>] kvm_arch_vm_ioctl+0x17a/0xcf8 [kvm]
 [<ffffffff810a8692>] ? unlock_page+0x27/0x2c
 [<ffffffff810bf879>] ? __do_fault+0x3a9/0x3e1
 [<ffffffffa011b12f>] kvm_vm_ioctl+0x364/0x38d [kvm]
 [<ffffffff81060cfa>] ? up_read+0x23/0x3d
 [<ffffffff810f3587>] vfs_ioctl+0x32/0xa6
 [<ffffffff810f3b19>] do_vfs_ioctl+0x495/0x4db
 [<ffffffff810e6b2f>] ? fget_light+0xc2/0x241
 [<ffffffff810e416c>] ? do_sys_open+0x104/0x116
 [<ffffffff81382d6d>] ? retint_swapgs+0xe/0x13
 [<ffffffff810f3ba6>] sys_ioctl+0x47/0x6a
 [<ffffffff810021db>] system_call_fastpath+0x16/0x1b
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Quote from Avi:

|Just change the assignment to a 'goto restart;' please,
|I don't like playing with list_for_each internals.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If kvm_task_switch() fails code exits to userspace without specifying
exit reason, so the previous exit reason is reused by userspace. Fix
this by specifying exit reason correctly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

'vcpu' is unused, remove it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Define 'multimapped' as 'bool'.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Remove 'struct kvm_unsync_walk' since it's not used.
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

emulator_task_switch() should return -1 for failure and 0 for success to
the caller, just like x86_emulate_insn() does.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

There is no real distinction between glevels=3 and glevels=4; both have
exactly the same format and the code is treated exactly the same way.  Drop
role.glevels and replace is with role.cr4_pae (which is meaningful).  This
simplifies the code a bit.

As a side effect, it allows sharing shadow page tables between pae and
longmode guest page tables at the same guest page.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

When a fault triggers a task switch, the error code, if existent, has to
be pushed on the new task's stack. Implement the missing bits.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Stop the switch immediately if task_switch_16/32 returned an error. Only
if that step succeeded, the switch should actually take place and update
any register states.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

We can call kvm_mmu_pte_write() directly from
emulator_cmpxchg_emulated() instead of passing mmu_only down to
emulator_write_emulated_onepage() and call it there.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch limits the number of pages per memory slot to make
us free from extra care about type issues.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently both SVM and VMX have their own DR handling code. Move it to
x86.c.
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

On SVM we set the instruction length of skipped instructions
to hard-coded, well known values, which could be wrong when (bogus,
but valid) prefixes (REX, segment override) are used.
Newer AMD processors (Fam10h 45nm and better, aka. PhenomII or
AthlonII) have an explicit NEXTRIP field in the VMCB containing the
desired information.
Since it is cheap to do so, we use this field to override the guessed
value on newer processors.
A fix for older CPUs would be rather expensive, as it would require
to fetch and partially decode the instruction. As the problem is not
a security issue and needs special, handcrafted code to trigger
(no compiler will ever generate such code), I omit a fix for older
CPUs.
If someone is interested, I have both a patch for these CPUs as well as
demo code triggering this issue: It segfaults under KVM, but runs
perfectly on native Linux.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

MAXPHYADDR is derived from cpuid 0x80000008, but when that isn't present, we
get some random value.

Fix by checking first that cpuid 0x80000008 is supported.
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Log emulated instructions in ftrace, especially if they failed.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Currently if we an instruction spans a page boundary, when we fetch the
second half we overwrite the first half.  This prevents us from tracing
the full instruction opcodes.

Fix by appending the second half to the first.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Commit a0abee86af2d1f048dbe99d2bcc4a2cefe685617 introduced unsetting of the
IRQ line from userspace. This added a new core specific callback that I
apparently forgot to add for BookE.

So let's add the callback for BookE as well, making it build again.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

After is_rsvd_bits_set() checks, EFER.NXE must be enabled if NX bit is seted
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

kvm_mmu_page.oos_link is not used, so remove it
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This patch does:
- 'sp' parameter in inspect_spte_fn() is not used, so remove it
- fix 'kvm' and 'slots' is not defined in count_rmaps()
- fix a bug in inspect_spte_has_rmap()
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Book3S knows how to convert floats to doubles and vice versa. BookE doesn't.
So let's make sure we don't export them on BookE.

This fixes a link error on BookE with CONFIG_KVM=y.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

BookE KVM doesn't know about QPRs, so let's not try to access then.

This fixes a build error on BookE KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

Cell can't handle MSR_FE0 and MSR_FE1 too well. It gets dog slow.
So let's just override the guest whenever we see one of the two and mask them
out. See commit ddf5f75a for reference.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Bool defaults to at least byte width. We usually only want to waste a single
bit on this. So let's move all the bool values to bitfields, potentially
saving memory.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Some constants were bigger than ints. Let's mark them as such so we don't
accidently truncate them.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>