- 13 10月, 2007 40 次提交
-
-
由 Rusty Russell 提交于
load_pdptrs can be handed an invalid cr3, and it should not oops. This can happen because we injected #gp in set_cr3() after we set vcpu->cr3 to the invalid value, or from kvm_vcpu_ioctl_set_sregs(), or memory configuration changes after the guest did set_cr3(). We should also copy the pdpte array once, before checking and assigning, otherwise an SMP guest can potentially alter the values between the check and the set. Finally one nitpick: ret = 1 should be done as late as possible: this allows GCC to check for unset "ret" should the function change in future. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Aurelien Jarno 提交于
The writeback fixes (02c03a32) let some dead code in the cmpxchg instruction emulation. Remove it. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Yang, Sheng 提交于
This patch mainly imports some constants and rename two exist constants of vmcs according to IA32 SDM. It also adds two constants to indicate Lock bit and Enable bit in MSR_IA32_FEATURE_CONTROL, and replace the hardcode _5_ with these two bits. Signed-off-by: NSheng Yang <sheng.yang@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Shaohua Li 提交于
gfn_to_page might sleep with swap support. Move it out of the kmap calls. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Shaohua Li 提交于
vmx_cpu_run doesn't handle error correctly and kvm_mmu_reload might sleep with mutex changes, so I move it above. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Don't fall through and turn on PAE in this case. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Right now, the bug is harmless as we never emulate one-byte 0xb6 or 0xb7. But things may change. Noted by the mysterious Gabriel C. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
The writeback fixes (02c03a32) broke cmov emulation. Fix. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Intel manual (and KVM definition) say the TPR is 4 bits wide. Also fix CR8_RESEVED_BITS typo. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jeff Dike 提交于
Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Creating one's own BITMAP macro seems suboptimal: if we use manual arithmetic in the one place exposed to userspace, we can use standard macros elsewhere. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
On this machine (Intel), writing to the CR4 bits 0x00000800 and 0x00001000 cause a GPF. The Intel manual is a little unclear, but AFIACT they're reserved, too. Also fix spelling of CR4_RESEVED_BITS. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
The kernel now has asm/cpu-features.h: use those macros instead of inventing our own. Also spell out definition of CR3_RESEVED_BITS, fix spelling and tighten it for the non-PAE case. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
The kernel now has asm/cpu-features.h: use those macros instead of inventing our own. Also spell out definition of CR0_RESEVED_BITS (no code change) and fix typo. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Don't pre-declare hardware_disable: shuffle the reboot hook down. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Speling error in comment. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
I have shied away from touching x86_emulate.c (it could definitely use some love, but it is forked from the Xen code, and it would be more productive to cross-merge fixes). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
KVM interface is no longer experimental. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Eddie Dong 提交于
Add string pio write support to support some version of Windows. Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Note that as the size of struct kvm_run is not part of the ABI, we can add things at the end. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Qing He 提交于
This patch adds a `vcpu_id' field in `struct vcpu', so we can differentiate BSP and APs without pointer comparison or arithmetic. Signed-off-by: NQing He <qing.he@intel.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Nguyen Anh Quynh 提交于
*nopage() in kvm_main.c should only store the type of mmap() fault if the pointers are not NULL. This patch fixes the problem. Signed-off-by: NNguyen Anh Quynh <aquynh@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
KVM reuses the IOAPIC register definitions, and needs them even if the host is not compiled with IOAPIC support. Move the #ifdef below so that only the IOAPIC variables and functions are protected, and the register definitions are available to all. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Jeff Garzik 提交于
Fix DMI const-ification fallout that appeared when merging subsystem trees. Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
According to latest memory ordering specification documents from Intel and AMD, both manufacturers are committed to in-order loads from cacheable memory for the x86 architecture. Hence, smp_rmb() may be a simple barrier. Also according to those documents, and according to existing practice in Linux (eg. spin_unlock doesn't enforce ordering), stores to cacheable memory are visible in program order too. Special string stores are safe -- their constituent stores may be out of order, but they must complete in order WRT surrounding stores. Nontemporal stores to WB memory can go out of order, and so they should be fenced explicitly to make them appear in-order WRT other stores. Hence, smp_wmb() may be a simple barrier. http://developer.intel.com/products/processor/manuals/318147.pdf http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/24593.pdf In userspace microbenchmarks on a core2 system, fence instructions range anywhere from around 15 cycles to 50, which may not be totally insignificant in performance critical paths (code size will go down too). However the primary motivation for this is to have the canonical barrier implementation for x86 architecture. smp_rmb on buggy pentium pros remains a locked op, which is apparently required. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
wmb() on x86 must always include a barrier, because stores can go out of order in many cases when dealing with devices (eg. WC memory). Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
movnt* instructions are not strongly ordered with respect to other stores, so if we are to assume stores are strongly ordered in the rest of the 64 bit code, we must fence these off (see similar examples in 32 bit code). [ The AMD memory ordering document seems to say that nontemporal stores can also pass earlier regular stores, so maybe we need sfences _before_ movnt* everywhere too? ] Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
IOW, it needs to depend on both CONFIG_BLOCK and CONFIG_COMPAT. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (119 commits) [libata] struct pci_dev related cleanups libata: use ata_exec_internal() for PMP register access libata: implement ATA_PFLAG_RESETTING libata: add @timeout to ata_exec_internal[_sg]() ahci: fix notification handling ahci: clean up PORT_IRQ_BAD_PMP enabling ahci: kill leftover from enabling NCQ over PMP libata: wrap schedule_timeout_uninterruptible() in loop libata: skip suppress reporting if ATA_EHI_QUIET libata: clear ehi description after initial host report pata_jmicron: match vendor and class code only libata: add ST9160821AS / 3.ALD to NCQ blacklist pata_acpi: ACPI driver support libata-core: Expose gtm methods for driver use libata: add HDT722516DLA380 to NCQ blacklist libata: blacklist NCQ on Seagate Barracuda ST380817AS [libata] Turn on ACPI by default libata_scsi: Fix ATAPI transfer lengths libata: correct handling of SRST reset sequences libata: Integrate ACPI-based PATA/SATA hotplug - version 5 ...
-
由 Andi Kleen 提交于
Since there is no x86-64 architecture anymore it cannot be maintained. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (37 commits) PCI: merge almost all of pci_32.h and pci_64.h together PCI: X86: Introduce and enable PCI domain support PCI: Add 'nodomains' boot option, and pci_domains_supported global PCI: modify PCI bridge control ISA flag for clarity PCI: use _CRS for PCI resource allocation PCI: avoid P2P prefetch window for expansion ROMs PCI: skip ISA ioresource alignment on some systems PCI: remove transparent bridge sizing pci: write file size to inode on proc bus file write pci: use size stored in proc_dir_entry for proc bus files pci: implement "pci=noaer" PCI: fix IDE legacy mode resources MSI: Use correct data offset for 32-bit MSI in read_msi_msg() PCI: Fix incorrect argument order to list_add_tail() in PCI dynamic ID code PCI: i386: Compaq EVO N800c needs PCI bus renumbering PCI: Remove no longer correct documentation regarding MSI vector assignment PCI: re-enable onboard sound on "MSI K8T Neo2-FIR" PCI: quirk_vt82c586_acpi: Omit reading PCI revision ID PCI: quirk amd_8131_mmrbc: Omit reading pci revision ID cpqphp: Use PCI_CLASS_REVISION instead of PCI_REVISION_ID for read ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (75 commits) PM: merge device power-management source files sysfs: add copyrights kobject: update the copyrights kset: add some kerneldoc to help describe what these strange things are Driver core: rename ktype_edd and ktype_efivar Driver core: rename ktype_driver Driver core: rename ktype_device Driver core: rename ktype_class driver core: remove subsystem_init() sysfs: move sysfs file poll implementation to sysfs_open_dirent sysfs: implement sysfs_open_dirent sysfs: move sysfs_dirent->s_children into sysfs_dirent->s_dir sysfs: make sysfs_root a regular directory dirent sysfs: open code sysfs_attach_dentry() sysfs: make s_elem an anonymous union sysfs: make bin attr open get active reference of parent too sysfs: kill unnecessary NULL pointer check in sysfs_release() sysfs: kill unnecessary sysfs_get() in open paths sysfs: reposition sysfs_dirent->s_mode. sysfs: kill sysfs_update_file() ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits) USB: fix race in autosuspend reschedule atmel_usba_udc: Keep track of the device status USB: Nikon D40X unusual_devs entry USB: serial core should respect driver requirements USB: documentation for USB power management USB: skip autosuspended devices during system resume USB: mutual exclusion for EHCI init and port resets USB: allow usbstorage to have LUNS greater than 2Tb USB: Adding support for SHARP WS011SH to ipaq.c USB: add atmel_usba_udc driver USB: ohci SSB bus glue USB: ehci build fixes on au1xxx, ppc-soc USB: add runtime frame_no quirk for big-endian OHCI USB: funsoft: Fix termios USB: visor: termios bits USB: unusual_devs entry for Nikon DSC D2Xs USB: re-remove <linux/usb_sl811.h> USB: move <linux/usb_gadget.h> to <linux/usb/gadget.h> USB: Export URB statistics for powertop USB: serial gadget: Disable endpoints on unload ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Don't take semaphore in cpufreq_quick_get() [CPUFREQ] Support different families in fid/did to frequency conversion [CPUFREQ] cpufreq_stats: misc cpuinit section annotations [CPUFREQ] implement !CONFIG_CPU_FREQ stub for cpufreq_unregister_notifier() [CPUFREQ] mark hotplug notifier callback as __cpuinit [CPUFREQ] Only check for transition latency on problematic governors (kconfig fix) [CPUFREQ] allow ondemand and conservative cpufreq governors to be used as default [CPUFREQ] move policy's governor initialisation out of low-level drivers into cpufreq core [CPUFREQ] Longhaul - Add support for PM133 northbridge [CPUFREQ] x86: use num_online_nodes to get physical cpus numbers for
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86: (40 commits) x86: HPET add another ICH7 PCI id x86: HPET force enable ICH5 suspend/resume fix x86: HPET force enable for ICH5 x86: HPET try to activate force detected hpet x86: HPET force enable o ICH7 and later x86: HPET restructure hpet code for hpet force enable clock events: allow replacement of broadcast timer i386/x8664: cleanup the shared hpet code i386: Remove the useless #ifdef in i8253.h ACPI: remove the now unused ifdef code jiffies: remove unused macros x86_64: cleanup apic.c after clock events switch x86_64: remove now unused code x86: unify timex.h variants x86: kill 8253pit.h x86: disable apic timer for AMD C1E enabled CPUs x86: Fix irq0 / local apic timer accounting x86_64: convert to clock events x86_64: Add (not yet used) clock event functions x86_64: prepare idle loop for dynamic ticks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (23 commits) ocfs2: Optionally return filldir errors ocfs2: Write support for directories with inline data ocfs2: Read support for directories with inline data ocfs2: Write support for inline data ocfs2: Read support for inline data ocfs2: Structure updates for inline data ocfs2: Cleanup dirent size check ocfs2: Rename cleanups ocfs2: Provide convenience function for ino lookup ocfs2: Implement ocfs2_empty_dir() as a caller of ocfs2_dir_foreach() ocfs2: Remove open coded readdir() ocfs2: Pass raw u64 to filldir ocfs2: Abstract out core dir listing functionality ocfs2: Move directory manipulation code into dir.c ocfs2: Small refactor of truncate zeroing code ocfs2: move nonsparse hole-filling into ocfs2_write_begin() ocfs2: Sync ocfs2_fs.h with ocfs2-tools [PATCH] fs/ocfs2/: removed unneeded initial value and function's return value ocfs2: Implement show_options() ocfs2: Clear slot map when umounting a local volume ...
-
由 Linus Torvalds 提交于
* 'isdn-cleanups' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [ISDN] HiSax diva: split setup into three smaller functions [ISDN] HiSax sedlbauer: move ISAPNP and PCI code into functions of their own [ISDN] HiSax elsa: split huge setup function into four smaller functions [ISDN] HiSax avm_pci: split setup into three smaller functions [ISDN] Remove CONFIG_PCI ifdefs from 100% PCI source code
-
由 Greg Kroah-Hartman 提交于
It was just duplicated code... Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jeff Garzik 提交于
* fix bug in pci_read() and pci_write() which prevented PCI domain support from working (hardcoded domain 0). * unconditionally enable CONFIG_PCI_DOMAINS * implement pci_domain_nr() and pci_proc_domain(), as required of all arches when CONFIG_PCI_DOMAINS is enabled. * store domain in struct pci_sysdata, as assigned by ACPI * support "pci=nodomains" Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-