Replace acpi_in_resume with a more general hack
to check irqs_disabled() on any kmalloc() from ACPI.
While setting (system_state != SYSTEM_RUNNING) on resume
seemed more general, Andrew Morton preferred this approach.

http://bugzilla.kernel.org/show_bug.cgi?id=3469

Make acpi_os_allocate() into an inline function to
allow /proc/slab_allocators to work.

Delete some memset() that could fault on allocation failure.
Signed-off-by: NLen Brown <len.brown@intel.com>

Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Implemented the use of a cache object for all internal
namespace nodes. Since there are about 1000 static nodes
in a typical system, this will decrease memory use for
cache implementations that minimize per-allocation overhead
(such as a slab allocator.)

Removed the reference count mechanism for internal
namespace nodes, since it was deemed unnecessary. This
reduces the size of each namespace node by about 5%-10%
on all platforms. Nodes are now 20 bytes for the 32-bit
case, and 32 bytes for the 64-bit case.

Optimized several internal data structures to reduce
object size on 64-bit platforms by packing data within
the 64-bit alignment. This includes the frequently used
ACPI_OPERAND_OBJECT, of which there can be ~1000 static
instances corresponding to the namespace objects.

Added two new strings for the predefined _OSI method:
"Windows 2001.1 SP1" and "Windows 2006".

Split the allocation tracking mechanism out to a separate
file, from utalloc.c to uttrack.c. This mechanism appears
to be only useful for application-level code. Kernels may
wish to not include uttrack.c in distributions.

Removed all remnants of the obsolete ACPI_REPORT_* macros
and the associated code. (These macros have been replaced
by the ACPI_ERROR and ACPI_WARNING macros.)
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Removed a couple of extraneous ACPI_ERROR messages that
appeared during normal execution. These became apparent
after the conversion from ACPI_DEBUG_PRINT.

Fixed a problem where the CreateField operator could hang
if the BitIndex or NumBits parameter referred to a named
object. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5359

Fixed a problem where a DeRefOf operation on a buffer
object incorrectly failed with an exception. This also
fixes a couple of related RefOf and DeRefOf issues.
From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5360
http://bugzilla.kernel.org/show_bug.cgi?id=5387
http://bugzilla.kernel.org/show_bug.cgi?id=5392

Fixed a problem where the AE_BUFFER_LIMIT exception was
returned instead of AE_STRING_LIMIT on an out-of-bounds
Index() operation. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5480

Implemented a memory cleanup at the end of the execution
of each iteration of an AML While() loop, preventing the
accumulation of outstanding objects. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5427

Eliminated a chunk of duplicate code in the object
resolution code. From Valery Podrezov.
http://bugzilla.kernel.org/show_bug.cgi?id=5336

Fixed several warnings during the 64-bit code generation.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Added 2006 copyright.

At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n

Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Implemented support to ignore an attempt to install/load
a particular ACPI table more than once. Apparently there
exists BIOS code that repeatedly attempts to load the same
SSDT upon certain events. Thanks to Venkatesh Pallipadi.

Restructured the main interface to the AML parser in
order to correctly handle all exceptional conditions. This
will prevent leakage of the OwnerId resource and should
eliminate the AE_OWNER_ID_LIMIT exceptions seen on some
machines. Thanks to Alexey Starikovskiy.

Support for "module level code" has been disabled in this
version due to a number of issues that have appeared
on various machines. The support can be enabled by
defining ACPI_ENABLE_MODULE_LEVEL_CODE during subsystem
compilation. When the issues are fully resolved, the code
will be enabled by default again.

Modified the internal functions for debug print support
to define the FunctionName parameter as a (const char *)
for compatibility with compiler built-in macros such as
__FUNCTION__, etc.

Linted the entire ACPICA source tree for both 32-bit
and 64-bit.
Signed-off-by: NRobert Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPICA 20050617:

Moved the object cache operations into the OS interface
layer (OSL) to allow the host OS to handle these operations
if desired (for example, the Linux OSL will invoke the
slab allocator).  This support is optional; the compile
time define ACPI_USE_LOCAL_CACHE may be used to utilize
the original cache code in the ACPI CA core.  The new OSL
interfaces are shown below.  See utalloc.c for an example
implementation, and acpiosxf.h for the exact interface
definitions.  Thanks to Alexey Starikovskiy.
	acpi_os_create_cache
	acpi_os_delete_cache
	acpi_os_purge_cache
	acpi_os_acquire_object
	acpi_os_release_object

Modified the interfaces to acpi_os_acquire_lock and
acpi_os_release_lock to return and restore a flags
parameter.  This fits better with many OS lock models.
Note: the current execution state (interrupt handler
or not) is no longer passed to these interfaces.  If
necessary, the OSL must determine this state by itself, a
simple and fast operation.  Thanks to Alexey Starikovskiy.

Fixed a problem in the ACPI table handling where a valid
XSDT was assumed present if the revision of the RSDP
was 2 or greater.  According to the ACPI specification,
the XSDT is optional in all cases, and the table manager
therefore now checks for both an RSDP >=2 and a valid
XSDT pointer.  Otherwise, the RSDT pointer is used.
Some ACPI 2.0 compliant BIOSs contain only the RSDT.

Fixed an interpreter problem with the Mid() operator in the
case of an input string where the resulting output string
is of zero length.  It now correctly returns a valid,
null terminated string object instead of a string object
with a null pointer.

Fixed a problem with the control method argument handling
to allow a store to an Arg object that already contains an
object of type Device.  The Device object is now correctly
overwritten.  Previously, an error was returned.

ACPICA 20050624:

Modified the new OSL cache interfaces to use ACPI_CACHE_T
as the type for the host-defined cache object.  This allows
the OSL implementation to define and type this object in
any manner desired, simplifying the OSL implementation.
For example, ACPI_CACHE_T is defined as kmem_cache_t for
Linux, and should be defined in the OS-specific header
file for other operating systems as required.

Changed the interface to AcpiOsAcquireObject to directly
return the requested object as the function return (instead
of ACPI_STATUS.) This change was made for performance
reasons, since this is the purpose of the interface in the
first place.  acpi_os_acquire_object is now similar to the
acpi_os_allocate interface.  Thanks to Alexey Starikovskiy.

Modified the initialization sequence in
acpi_initialize_subsystem to call the OSL interface
acpi_osl_initialize first, before any local initialization.
This change was required because the global initialization
now calls OSL interfaces.

Restructured the code base to split some files because
of size and/or because the code logically belonged in a
separate file.  New files are listed below.

  utilities/utcache.c	/* Local cache interfaces */
  utilities/utmutex.c	/* Local mutex support */
  utilities/utstate.c	/* State object support */
  parser/psloop.c	/* Main AML parse loop */
Signed-off-by: NLen Brown <len.brown@intel.com>

Fixed three cases in the interpreter where an "index"
argument to an ASL function was still (internally) 32
bits instead of the required 64 bits.  This was the Index
argument to the Index, Mid, and Match operators.

The "strupr" function is now permanently local
(acpi_ut_strupr), since this is not a POSIX-defined
function and not present in most kernel-level C
libraries. References to the C library strupr function
have been removed from the headers.

Completed the deployment of static
functions/prototypes. All prototypes with the static
attribute have been moved from the headers to the owning
C file.

ACPICA 20050329 from Bob Moore

An error is now generated if an attempt is made to create
a Buffer Field of length zero (A CreateField with a length
operand of zero.)

The interpreter now issues a warning whenever executable
code at the module level is detected during ACPI table
load. This will give some idea of the prevalence of this
type of code.

Implemented support for references to named objects (other
than control methods) within package objects.

Enhanced package object output for the debug
object. Package objects are now completely dumped, showing
all elements.

Enhanced miscellaneous object output for the debug
object. Any object can now be written to the debug object
(for example, a device object can be written, and the type
of the object will be displayed.)

The "static" qualifier has been added to all local
functions across the core subsystem.

The number of "long" lines (> 80 chars) within the source
has been significantly reduced, by about 1/3.

Cleaned up all header files to ensure that all CA/iASL
functions are prototyped (even static functions) and the
formatting is consistent.

Two new header files have been added, acopcode.h and
acnames.h.

Removed several obsolete functions that were no longer
used.
Signed-off-by: NLen Brown <len.brown@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!