Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 14 4月, 2017 1 次提交
  3. 12 4月, 2017 2 次提交
  5. 11 4月, 2017 1 次提交
  7. 10 4月, 2017 2 次提交
  9. 09 4月, 2017 2 次提交
    • F
      net: dsa: Factor bottom tag receive functions · a86d8bec
      由 Florian Fainelli 提交于 
      All DSA tag receive functions do strictly the same thing after they have located
the originating source port from their tag specific protocol:

- push ETH_HLEN bytes
- set pkt_type to PACKET_HOST
- call eth_type_trans()
- bump up counters
- call netif_receive_skb()

Factor all of that into dsa_switch_rcv(). This also makes us return a pointer to
a sk_buff, which makes us symetric with the xmit function.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a86d8bec
    • S
      skbuff: Extend gso_type to unsigned int. · 7f564528
      由 Steffen Klassert 提交于 
      All available gso_type flags are currently in use, so
extend gso_type from 'unsigned short' to 'unsigned int'
to be able to add further flags.

We reorder the struct skb_shared_info to use
two bytes of the four byte hole before dataref.
All fields before dataref are cleared, i.e.
four bytes more than before the change.

The remaining two byte hole is moved to the
beginning of the structure, this protects us
from immediate overwites on out of bound writes
to the sk_buff head.

Structure layout on x86-64 before the change:

struct skb_shared_info {
	unsigned char              nr_frags;             /*     0     1 */
	__u8                       tx_flags;             /*     1     1 */
	short unsigned int         gso_size;             /*     2     2 */
	short unsigned int         gso_segs;             /*     4     2 */
	short unsigned int         gso_type;             /*     6     2 */
	struct sk_buff *           frag_list;            /*     8     8 */
	struct skb_shared_hwtstamps hwtstamps;           /*    16     8 */
	u32                        tskey;                /*    24     4 */
	__be32                     ip6_frag_id;          /*    28     4 */
	atomic_t                   dataref;              /*    32     4 */

	/* XXX 4 bytes hole, try to pack */

	void *                     destructor_arg;       /*    40     8 */
	skb_frag_t                 frags[17];            /*    48   272 */
	/* --- cacheline 5 boundary (320 bytes) --- */

	/* size: 320, cachelines: 5, members: 12 */
	/* sum members: 316, holes: 1, sum holes: 4 */
};

Structure layout on x86-64 after the change:

struct skb_shared_info {
	short unsigned int         _unused;              /*     0     2 */
	unsigned char              nr_frags;             /*     2     1 */
	__u8                       tx_flags;             /*     3     1 */
	short unsigned int         gso_size;             /*     4     2 */
	short unsigned int         gso_segs;             /*     6     2 */
	struct sk_buff *           frag_list;            /*     8     8 */
	struct skb_shared_hwtstamps hwtstamps;           /*    16     8 */
	unsigned int               gso_type;             /*    24     4 */
	u32                        tskey;                /*    28     4 */
	__be32                     ip6_frag_id;          /*    32     4 */
	atomic_t                   dataref;              /*    36     4 */
	void *                     destructor_arg;       /*    40     8 */
	skb_frag_t                 frags[17];            /*    48   272 */
	/* --- cacheline 5 boundary (320 bytes) --- */

	/* size: 320, cachelines: 5, members: 13 */
};
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7f564528
  11. 08 4月, 2017 3 次提交
  13. 07 4月, 2017 4 次提交
  15. 06 4月, 2017 6 次提交
    • D
      rxrpc: Trace client call connection · 89ca6948
      由 David Howells 提交于 
      Add a tracepoint (rxrpc_connect_call) to log the combination of rxrpc_call
pointer, afs_call pointer/user data and wire call parameters to make it
easier to match the tracebuffer contents to captured network packets.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      89ca6948
    • D
      rxrpc: Trace changes in a call's receive window size · 740586d2
      由 David Howells 提交于 
      Add a tracepoint (rxrpc_rx_rwind_change) to log changes in a call's receive
window size as imposed by the peer through an ACK packet.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      740586d2
    • D
      rxrpc: Trace received aborts · 005ede28
      由 David Howells 提交于 
      Add a tracepoint (rxrpc_rx_abort) to record received aborts.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      005ede28
    • D
      rxrpc: Trace protocol errors in received packets · fb46f6ee
      由 David Howells 提交于 
      Add a tracepoint (rxrpc_rx_proto) to record protocol errors in received
packets.  The following changes are made:

 (1) Add a function, __rxrpc_abort_eproto(), to note a protocol error on a
     call and mark the call aborted.  This is wrapped by
     rxrpc_abort_eproto() that makes the why string usable in trace.

 (2) Add trace_rxrpc_rx_proto() or rxrpc_abort_eproto() to protocol error
     generation points, replacing rxrpc_abort_call() with the latter.

 (3) Only send an abort packet in rxkad_verify_packet*() if we actually
     managed to abort the call.

Note that a trace event is also emitted if a kernel user (e.g. afs) tries
to send data through a call when it's not in the transmission phase, though
it's not technically a receive event.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      fb46f6ee
    • D
      rxrpc: Note a successfully aborted kernel operation · 84a4c09c
      由 David Howells 提交于 
      Make rxrpc_kernel_abort_call() return an indication as to whether it
actually aborted the operation or not so that kafs can trace the failure of
the operation.  Note that 'success' in this context means changing the
state of the call, not necessarily successfully transmitting an ABORT
packet.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
      84a4c09c
    • J
      bonding: attempt to better support longer hw addresses · faeeb317
      由 Jarod Wilson 提交于 
      People are using bonding over Infiniband IPoIB connections, and who knows
what else. Infiniband has a hardware address length of 20 octets
(INFINIBAND_ALEN), and the network core defines a MAX_ADDR_LEN of 32.
Various places in the bonding code are currently hard-wired to 6 octets
(ETH_ALEN), such as the 3ad code, which I've left untouched here. Besides,
only alb is currently possible on Infiniband links right now anyway, due
to commit 1533e773, so the alb code is where most of the changes are.

One major component of this change is the addition of a bond_hw_addr_copy
function that takes a length argument, instead of using ether_addr_copy
everywhere that hardware addresses need to be copied about. The other
major component of this change is converting the bonding code from using
struct sockaddr for address storage to struct sockaddr_storage, as the
former has an address storage space of only 14, while the latter is 128
minus a few, which is necessary to support bonding over device with up to
MAX_ADDR_LEN octet hardware addresses. Additionally, this probably fixes
up some memory corruption issues with the current code, where it's
possible to write an infiniband hardware address into a sockaddr declared
on the stack.

Lightly tested on a dual mlx4 IPoIB setup, which properly shows a 20-octet
hardware address now:

$ cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: fault-tolerance (active-backup) (fail_over_mac active)
Primary Slave: mlx4_ib0 (primary_reselect always)
Currently Active Slave: mlx4_ib0
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 100
Down Delay (ms): 100

Slave Interface: mlx4_ib0
MII Status: up
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr:
80:00:02:08:fe:80:00:00:00:00:00:00:e4:1d:2d:03:00:1d:67:01
Slave queue ID: 0

Slave Interface: mlx4_ib1
MII Status: up
Speed: Unknown
Duplex: Unknown
Link Failure Count: 0
Permanent HW addr:
80:00:02:09:fe:80:00:00:00:00:00:01:e4:1d:2d:03:00:1d:67:02
Slave queue ID: 0

Also tested with a standard 1Gbps NIC bonding setup (with a mix of
e1000 and e1000e cards), running LNST's bonding tests.

CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      faeeb317
  17. 05 4月, 2017 6 次提交
  19. 04 4月, 2017 8 次提交
  21. 03 4月, 2017 1 次提交
  23. 02 4月, 2017 4 次提交
    • D
      net: mpls: Increase max number of labels for lwt encap · 1511009c
      由 David Ahern 提交于 
      Alow users to push down more labels per MPLS encap. Similar to LSR case,
move label array to the end of mpls_iptunnel_encap and allocate based on
the number of labels for the route.

For consistency with the LSR case, re-use the same maximum number of
labels.
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1511009c
    • P
      udp: use sk_protocol instead of pcflag to detect udplite sockets · 3d8417d7
      由 Paolo Abeni 提交于 
      In the udp_sock struct, the 'forward_deficit' and 'pcflag' fields
share the same cacheline. While the first is dirtied by
udp_recvmsg, the latter is read, possibly several times, by the
bottom half processing to discriminate between udp and udplite
sockets.

With this patch, sk->sk_protocol is used to check is the socket is
really an udplite one, avoiding some cache misses per
packet and improving the performance under udp_flood with
small packet up to 10%.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3d8417d7
    • A
      bpf: introduce BPF_PROG_TEST_RUN command · 1cf1cae9
      由 Alexei Starovoitov 提交于 
      development and testing of networking bpf programs is quite cumbersome.
Despite availability of user space bpf interpreters the kernel is
the ultimate authority and execution environment.
Current test frameworks for TC include creation of netns, veth,
qdiscs and use of various packet generators just to test functionality
of a bpf program. XDP testing is even more complicated, since
qemu needs to be started with gro/gso disabled and precise queue
configuration, transferring of xdp program from host into guest,
attaching to virtio/eth0 and generating traffic from the host
while capturing the results from the guest.

Moreover analyzing performance bottlenecks in XDP program is
impossible in virtio environment, since cost of running the program
is tiny comparing to the overhead of virtio packet processing,
so performance testing can only be done on physical nic
with another server generating traffic.

Furthermore ongoing changes to user space control plane of production
applications cannot be run on the test servers leaving bpf programs
stubbed out for testing.

Last but not least, the upstream llvm changes are validated by the bpf
backend testsuite which has no ability to test the code generated.

To improve this situation introduce BPF_PROG_TEST_RUN command
to test and performance benchmark bpf programs.

Joint work with Daniel Borkmann.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1cf1cae9
    • V
      net: dsa: add cross-chip bridging operations · 40ef2c93
      由 Vivien Didelot 提交于 
      Introduce crosschip_bridge_{join,leave} operations in the dsa_switch_ops
structure, which can be used by switches supporting interconnection.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      40ef2c93