Now that we are no longer bound to the drm_panel_ callbacks, call
MIPI_SEQ_POWER_ON/OFF at the proper place.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-4-git-send-email-jani.nikula@intel.com

intel_dsi_post_disable(), which does the MIPI_SEQ_ASSERT_RESET,
will always be called at some point before intel_dsi_pre_enable()
making the MIPI_SEQ_ASSERT_RESET in intel_dsi_pre_enable() redundant.

In addition, calling MIPI_SEQ_ASSERT_RESET in the enable path goes
against the VBT spec.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-3-git-send-email-jani.nikula@intel.com

Document the DSI panel enable / disable sequences from the spec,
for easy comparison between the code and the spec.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488374106-4949-2-git-send-email-jani.nikula@intel.com

v2: Addressed Jani's Review comments(renamed bit field macros)
v3: Jani's Review comment for aligning code to platforms and added
wrapper functions.
v4: Corrected enable/disable seuqence as per BSPEC
v5: Corrected waiting twice for same bit (Review comments: Jani)
v6: Rebased to Han's patches(dsi restructuring code)
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488352893-29916-2-git-send-email-madhav.chauhan@intel.com

On some devices only MIPI PORT C is used, in this case checking the
MIPI PORT A CTRL AFE_LATCHOUT bit (there is no such bit for PORT C
on VLV/CHT) will result in false positive "DSI LP not going Low" errors
as this checks the PORT A clk status.

In case both ports are used we have already checked the AFE_LATCHOUT
bit when going through the for_each_dsi_port() loop for PORT A and
checking the same bit again for PORT C is a no-op.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97061Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/242e4438bf29ebffc66eaa182f22b9d60d304bc2.1488273823.git.jani.nikula@intel.com

The drm_panel_enable/disable and drm_panel_prepare/unprepare calls are
not fine grained enough to abstract all the different steps we need to
take (and VBT sequences we need to exec) properly. So simply remove the
panel _enable/disable and prepare/unprepare callbacks and instead
export intel_dsi_exec_vbt_sequence() from intel_dsi_panel_vbt.c
and call that from intel_dsi_enable/disable().

No functional changes.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/b4ca5185d4788d92df2ed60837a24b8962a8e8ba.1488273823.git.jani.nikula@intel.com

Move the intel_dsi_clear_device_ready() function to higher up in
intel_dsi.c this pairs it with intel_dsi_device_ready(); and pairs
intel_dsi_*enable* with intel_dsi_*disable without
intel_dsi_clear_device_ready() sitting in the middle of them.

This commit purely moves code around, it does not make any
changes what-so-ever.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/f971d18ea6d350890447860aeb541dba072a6e47.1488273823.git.jani.nikula@intel.com

The enable path has an intel_dsi_prepare() helper which prepares various
registers for the mode-set. Move the code undoing this to a new
intel_dsi_unprepare() helper function for better symmetry between the
enable and disable paths. No functional changes.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/cc0baaf04ea74a20031b4b5bb128591dcfa78406.1488273823.git.jani.nikula@intel.com

intel_dsi_disable/enable only have one caller, merge them into their
respective callers.

Change msleep(2) into usleep_range(2000, 5000) to make checkpatch happy,
otherwise no functional changes.

The main advantage of this change is that it makes it easier to
follow all the steps of the panel enable / disable sequence when
reading the code.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d7249612e6d2e9639ecd1d8d106ca37d5794f2a4.1488273823.git.jani.nikula@intel.com

Instead of calling wait_for_dsi_fifo_empty on all dsi ports after calling
a drm_panel_foo helper which calls VBT sequences, move it to the VBT
mipi_exec_send_packet helper, which is the one VBT instruction which
actually puts data in the fifo.

This results in a nice cleanup making it clearer what all the steps on
intel_dsi_enable / disable are and this also makes the VBT code properly
wait till a command has actually been send before executing the next
steps (typically a delay) in the VBT sequence.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/289977b5699e252fea5c211d1d1645f9e79cca79.1488273823.git.jani.nikula@intel.com

Program the clk lane and tlpx time count registers
to configure DSI PHY.

v2: Addressed Jani's Review comments(renamed bit field macros)
v3: Program clk lane timing reg same as dphy param reg.
v4: Removed "line over 80 character" warning
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487335415-14766-3-git-send-email-madhav.chauhan@intel.com

The encoder power domain is obviously tied to the encoder, so store it
in struct intel_encoder. This avoids some indirection.

v2: Rebase
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-3-ander.conselvan.de.oliveira@intel.com

Disable device ready before MIPI port shutdown command.
This helps to avoid mipi split screen issues.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-8-git-send-email-vidya.srinivas@intel.com

Fix the Sequence to program BXT DSI Latch and ULPS.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: NBob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-6-git-send-email-vidya.srinivas@intel.com

Dual link Z-inversion overlap field is present
in MIPI_CTRL register unlike the older platforms,
hence setting the same in this patch.
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NMadhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1487078180-15147-5-git-send-email-madhav.chauhan@intel.com

Panel GPIO control should be done based on platform. Add a check
to restrict VLV and CHT specific GPIO confirguration, so that
they dont apply to other platforms.

The VBT spec fails to mention the PMIC backlight control option is valid
only for VLV/CHT, and the field may be set to "PMIC" for BXT even if
PMIC is not desired or possible.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
[Jani: amended commit message a bit and fixed indentation.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486551058-22596-2-git-send-email-vidya.srinivas@intel.com

Enable MIPI IO WA for BXT DSI as per bspec and
program the DSI regulators.

v2: Moved IO enable to pre-enable as per Mika's
review comments. Also reused the existing register
definition for BXT_P_CR_GT_DISP_PWRON.

v3: Added Programming the DSI regulators as per disable/enable
sequences.

v4: Restricting regulator changes to BXT as suggested by
Jani/Mika

v5: Removed redundant read/modify for regulator register as
per Jani's comment. Maintain enable/disable symmetry as per spec.
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Acked-by: NMika Kahola <mika.kahola@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1485353603-11260-1-git-send-email-vidya.srinivas@intel.com

On enable intel_dsi_enable() directly calls intel_enable_dsi_pll(),
make intel_dsi_disable() also directly call intel_disable_dsi_pll(),
rather then hiding the call in intel_dsi_clear_device_ready(),
no functional changes.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-7-hdegoede@redhat.com

udelay_range(2, 3) is inefficient and as discussions with Jani Nikula
<jani.nikula@linux.intel.com> unnecessary here. This replaces this
tight setting with a relaxed delay of min=20 and max=50. which helps
the hrtimer subsystem optimize timer handling.

Link: http://lkml.org/lkml/2016/12/15/127
Fixes: commit 37ab0810 ("drm/i915/bxt: DSI enable for BXT")
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481853560-19795-1-git-send-email-hofrat@osadl.org

Geminilake is mostly backwards compatible with broxton, so change most
of the IS_BROXTON() checks to IS_GEN9_LP(). Differences between the
platforms will be implemented in follow-up patches.

v2: Don't reuse broxton's path in intel_update_max_cdclk().
    Don't set plane count as in broxton.

v3: Rebase

v4: Include the check intel_bios_is_port_hpd_inverted().
    Commit message.

v5: Leave i915_dmc_info() out; glk's csr version != bxt's. (Rodrigo)

v6: Rebase.

v7: Convert a few mode IS_BROXTON() occurances in pps, ddi, dsi and pll
    code. (Rodrigo)

v8: Squash a couple of DDI patches with more conversions. (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-2-git-send-email-ander.conselvan.de.oliveira@intel.com

Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: NJyri Sarha <jsarha@ti.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NVincent Abriou <vincent.abriou@st.com>
Acked-by: NAlexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Pass dev_priv to intel_setup_outputs() and functions called by it, since
those are all intel i915 specific functions. Also, in the majority of
the functions dev_priv is used more often than dev. In the rare cases
where there are a few calls back into drm core, a local dev variable was
added.

v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com

For BXT, there is only one bit that enables/disables dual-link mode
and not different bits depending on which pipe is being used.
Signed-off-by: NBob Paauwe <bob.j.paauwe@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479767046-3964-1-git-send-email-bob.j.paauwe@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

Saves 864 bytes of .rodata strings and ~100 of .text.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NJani Nikula <jani.nikula@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Saves 1392 bytes of .rodata strings.

Also change a few function/macro prototypes in i915_gem_gtt.c
from dev to dev_priv where it made more sense to do so.

v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Mention function prototype changes. (David Weinehall)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NJani Nikula <jani.nikula@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

More .rodata string saving by avoid __I915__ magic inside WARNs.

v2: Add parantheses around dev_priv. (Ville Syrjala)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NJani Nikula <jani.nikula@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Storing the port enum in intel_encoder makes it convenient to know the
port attached to an encoder. Moving the port information up from
intel_digital_port to intel_encoder avoids unecessary intel_digital_port
access and handles MST encoders cleanly without requiring conditional
checks for them (thanks danvet).

v2:
Renamed the port enum member from 'attached_port' to 'port' (danvet)
Fixed missing initialization of port in intel_sdvo.c (danvet)

v3:
Fixed missing initialization of port in intel_crt.c (Ville)

v4:
Storing port for DVO encoders too.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NLyude <cpaul@redhat.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474334681-22690-3-git-send-email-dhinakaran.pandiyan@intel.com

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-11-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Unbreak bxt_dsi_get_pipe_config]
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some places iterate over connector_state to find the right
connector, pass it along as argument.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-7-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is mostly code churn, with exception of a few places:
- intel_display.c has changes in intel_sanitize_encoder
- intel_ddi.c has intel_ddi_fdi_disable calling intel_ddi_post_disable,
  and required a function change. Also affects intel_display.c
- intel_dp_mst.c passes a NULL crtc_state and conn_state to
  intel_ddi_post_disable for shutting down the real encoder.

  If we would pass conn_state, then conn_state->connector !=
  intel_dig_port->connector and conn_state->best_encoder !=
  to_intel_encoder(intel_dig_port).

  We also shouldn't pass crtc_state, because in that case the
  disabling sequence may potentially be different depending on
  which crtc is disabled last. Nice way to introduce bugs.

No other functional changes are done, diff stat is already huge.
Each encoder type will need to be fixed to use the atomic states
separately.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-6-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

has_dsi_encoder was introduced to indicate that the pipe is driving
a DSI encoder. Now that we have the output_types bitmask that can
tell us the same thing, let's just kill has_dsi_encoder.

v2: Rebase, handle BXT DSI transcoder, rewrote commit message

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466621833-5054-10-git-send-email-ville.syrjala@linux.intel.com

Since we now subclass struct drm_device, we can save pointer dances by
noting the equivalence of struct drm_device and struct drm_i915_private,
i.e. by using to_i915().

   text    data     bss     dec     hex filename
1073824    4562     416 1078802  107612 drivers/gpu/drm/i915/i915.ko
1068976    4562     416 1073954  106322 drivers/gpu/drm/i915/i915.ko

Created by the coccinelle script:

@@
expression E;
identifier p;
@@
- struct drm_i915_private *p = E->dev_private;
+ struct drm_i915_private *p = to_i915(E);
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467628477-25379-1-git-send-email-chris@chris-wilson.co.uk

By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-35-git-send-email-chris@chris-wilson.co.uk

By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-34-git-send-email-chris@chris-wilson.co.uk

By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-33-git-send-email-chris@chris-wilson.co.uk

By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-32-git-send-email-chris@chris-wilson.co.uk

By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-31-git-send-email-chris@chris-wilson.co.uk

By using the out-of-line intel_wait_for_register() not only do we can
efficiency from using the hybrid wait_for() contained within, but we
avoid code bloat from the numerous inlined loops, in total (all patches):

   text    data     bss     dec     hex filename
1078551    4557     416 1083524  108884 drivers/gpu/drm/i915/i915.ko
1070775    4557     416 1075748  106a24 drivers/gpu/drm/i915/i915.ko
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467297225-21379-30-git-send-email-chris@chris-wilson.co.uk

Defer connector registration from during construction to the driver
registration phase. This is important for ordering the action correctly,
e.g. not using debugfs before it is ready.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-4-git-send-email-chris@chris-wilson.co.uk

Currently the backlight is being registered in the load phase (before
the display and its objects are registered). Move the backlight
registration into the analogous phase by performing it from the
connector registration, just after its creation.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466773227-7994-3-git-send-email-chris@chris-wilson.co.uk