Add a standard helper to configure the LCD output pins for a 24BPP
display with VSYNC/HSYNC/VDEN.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a device definition for the new S3C framebuffer
driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add device definition and support functions for the
second i2c device (i2c1). If this is selected, the first
i2c bus will become index 0 instead of index -1.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Provide  the initial register definitions for the newer
style of framebuffer cores found in the Samsung SoCs
such as S3C2450, S3C64XX.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Fix the compilation of the SDHCI configuration/setup
functions to depend on their respective configuration
variables.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Select the correct GPIO configuration function for channel 1
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the Samsung SDHCI driver to the build.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the new I2C driver and the EEPROM devices to
the system, as well as update to the latest kernel.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add SDHCI channel 1.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a header to define setup functions for the i2c
devices.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the I2C devices on the SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the second I2C channel on the SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add common gpio setup for i2c bus 1 on all current
S3C64XX architectures.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add i2c bus 0 to the configuration
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the necessary device initialisation information
for I2C device 0.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

GPIO register and configuration definitions for GPIO
banks N, O, P and Q.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

GPIO register and configuration definitions for GPIO
banks G, H, I and J.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

GPIO register and configuration definitions for GPIO
banks D, E and F.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

GPIO register and configuration definitions for GPIO
banks A, B and C.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.c
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add device definition and support code for the Samsung
HSMMC channel 1 device.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the necessary helper functions for setting up the SDHCI
device information.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the specific register definitions for the Samsung SDHCI
(HSMMC) block for the S3C2443 and S3C64XX series.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add new GPIO configuration calls that mesh with the
new gpiolib support.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add gpiolib registration for the GPIOs available on the
S3C64XX platform
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The gpiolib driver keeps its chip array to itself
and having a separate array for s3c-only gpios stops
any non-s3c gpio being used in one of the s3c specific
configuration calls.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the common parts of the GPIO code into plat-s3c
for use with both the s3c24xx and s3c64xx systems.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Define the gpio numbers for the S3C64XX GPIO banks
available on the S3C6400 and S3C6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add HSMMC0 device to SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the definition for the hsmmc device to plat-s3c
to be shared between the s3c24xx and s3c64xx platforms.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add definitions for the external interrupt groups which accompany
the original IRQ_EINT from the s3c24xx series.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Discard the 'void *' from the pointers used for the
virtual addresses when setting up the .virtual fields
of the io map to avoid implicit cast warnings
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

 Index: linux.git/arch/arm/plat-s3c64xx/cpu.c
===================================================================

Some of the startup output can be reduced to
KERN_DEBUG from KERN_INFO as it is only really
useful when trying to debug kernel initialisation
problems.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a basic defconfig for s3c6400 series machines.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Initial machine support for the Samsung SMDK6410.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add the necessary code to support IRQ_EINT(x) on
the S3C64XX series of CPUs.

Note, since there is no GPIO configuration support
in the kernel, the irq set_type method does not
configure the relevant pin to interrupt.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add mapping for GPIO block in the static mappings.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The original arch/arm/include/asm/hardware/vic.h was
written for the PL190 ARM VIC implementation, and as
such does not have any information about the PL192
version.

Add details about the PL192 and PL190 specific registers
and any changes between the two units.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add demux handling for the UART interrupts
generated by the VIC into their seperate IRQs
that the serial driver can register.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The S3C64XX code changes the order of the serial
interrupts, so change the registration process to
pickup the extra IRQ resources.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>