Since the introduction of FAULT_FLAG_SIZE to the vm_fault flag, it has
been somewhat painful with getting the flags set and removed at the
correct locations.  More than one kernel oops was introduced due to
difficulties of getting the placement correctly.

Remove the flag values and introduce an input parameter to huge_fault
that indicates the size of the page entry.  This makes the code easier
to trace and should avoid the issues we see with the fault flags where
removal of the flag was necessary in the fallback paths.

Link: http://lkml.kernel.org/r/148615748258.43180.1690152053774975329.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NDave Jiang <dave.jiang@intel.com>
Tested-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The current transparent hugepage code only supports PMDs.  This patch
adds support for transparent use of PUDs with DAX.  It does not include
support for anonymous pages.  x86 support code also added.

Most of this patch simply parallels the work that was done for huge
PMDs.  The only major difference is how the new ->pud_entry method in
mm_walk works.  The ->pmd_entry method replaces the ->pte_entry method,
whereas the ->pud_entry method works along with either ->pmd_entry or
->pte_entry.  The pagewalk code takes care of locking the PUD before
calling ->pud_walk, so handlers do not need to worry whether the PUD is
stable.

[dave.jiang@intel.com: fix SMP x86 32bit build for native_pud_clear()]
  Link: http://lkml.kernel.org/r/148719066814.31111.3239231168815337012.stgit@djiang5-desk3.ch.intel.com
[dave.jiang@intel.com: native_pud_clear missing on i386 build]
  Link: http://lkml.kernel.org/r/148640375195.69754.3315433724330910314.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/148545059381.17912.8602162635537598445.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Tested-by: NAlexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "1G transparent hugepage support for device dax", v2.

The following series implements support for 1G trasparent hugepage on
x86 for device dax.  The bulk of the code was written by Mathew Wilcox a
while back supporting transparent 1G hugepage for fs DAX.  I have
forward ported the relevant bits to 4.10-rc.  The current submission has
only the necessary code to support device DAX.

Comments from Dan Williams: So the motivation and intended user of this
functionality mirrors the motivation and users of 1GB page support in
hugetlbfs.  Given expected capacities of persistent memory devices an
in-memory database may want to reduce tlb pressure beyond what they can
already achieve with 2MB mappings of a device-dax file.  We have
customer feedback to that effect as Willy mentioned in his previous
version of these patches [1].

[1]: https://lkml.org/lkml/2016/1/31/52

Comments from Nilesh @ Oracle:

There are applications which have a process model; and if you assume
10,000 processes attempting to mmap all the 6TB memory available on a
server; we are looking at the following:

processes         : 10,000
memory            :    6TB
pte @ 4k page size: 8 bytes / 4K of memory * #processes = 6TB / 4k * 8 * 10000 = 1.5GB * 80000 = 120,000GB
pmd @ 2M page size: 120,000 / 512 = ~240GB
pud @ 1G page size: 240GB / 512 = ~480MB

As you can see with 2M pages, this system will use up an exorbitant
amount of DRAM to hold the page tables; but the 1G pages finally brings
it down to a reasonable level.  Memory sizes will keep increasing; so
this number will keep increasing.

An argument can be made to convert the applications from process model
to thread model, but in the real world that may not be always practical.
Hopefully this helps explain the use case where this is valuable.

This patch (of 3):

In preparation for adding the ability to handle PUD pages, convert
vm_operations_struct.pmd_fault to vm_operations_struct.huge_fault.  The
vm_fault structure is extended to include a union of the different page
table pointers that may be needed, and three flag bits are reserved to
indicate which type of pointer is in the union.

[ross.zwisler@linux.intel.com: remove unused function ext4_dax_huge_fault()]
  Link: http://lkml.kernel.org/r/1485813172-7284-1-git-send-email-ross.zwisler@linux.intel.com
[dave.jiang@intel.com: clear PMD or PUD size flags when in fall through path]
  Link: http://lkml.kernel.org/r/148589842696.5820.16078080610311444794.stgit@djiang5-desk3.ch.intel.com
Link: http://lkml.kernel.org/r/148545058784.17912.6353162518188733642.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.comSigned-off-by: NDave Jiang <dave.jiang@intel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We noticed a performance regression when moving hadoop workloads from
3.10 kernels to 4.0 and 4.6.  This is accompanied by increased pageout
activity initiated by kswapd as well as frequent bursts of allocation
stalls and direct reclaim scans.  Even lowering the dirty ratios to the
equivalent of less than 1% of memory would not eliminate the issue,
suggesting that dirty pages concentrate where the scanner is looking.

This can be traced back to recent efforts of thrash avoidance.  Where
3.10 would not detect refaulting pages and continuously supply clean
cache to the inactive list, a thrashing workload on 4.0+ will detect and
activate refaulting pages right away, distilling used-once pages on the
inactive list much more effectively.  This is by design, and it makes
sense for clean cache.  But for the most part our workload's cache
faults are refaults and its use-once cache is from streaming writes.  We
end up with most of the inactive list dirty, and we don't go after the
active cache as long as we have use-once pages around.

But waiting for writes to avoid reclaiming clean cache that *might*
refault is a bad trade-off.  Even if the refaults happen, reads are
faster than writes.  Before getting bogged down on writeback, reclaim
should first look at *all* cache in the system, even active cache.

To accomplish this, activate pages that are dirty or under writeback
when they reach the end of the inactive LRU.  The pages are marked for
immediate reclaim, meaning they'll get moved back to the inactive LRU
tail as soon as they're written back and become reclaimable.  But in the
meantime, by reducing the inactive list to only immediately reclaimable
pages, we allow the scanner to deactivate and refill the inactive list
with clean cache from the active list tail to guarantee forward
progress.

[hannes@cmpxchg.org: update comment]
  Link: http://lkml.kernel.org/r/20170202191957.22872-8-hannes@cmpxchg.org
Link: http://lkml.kernel.org/r/20170123181641.23938-6-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Memory pressure can put dirty pages at the end of the LRU without
anybody running into dirty limits.  Don't start writing individual pages
from kswapd while the flushers might be asleep.

Unlike the old direct reclaim flusher wakeup (removed in the next patch)
that flushes the number of pages just scanned, this patch wakes the
flushers for all outstanding dirty pages.  That seemed to perform better
in a synthetic test that pushes dirty pages to the end of the LRU and
into reclaim, because we know LRU aging outstrips writeback already, and
this way we give younger dirty pages a headstart rather than wait until
reclaim runs into them as well.  It also means less plugging and risk of
exhausting the struct request pool from reclaim.

There is a concern that this will cause temporary files that used to get
dirtied and truncated before writeback to now get written to disk under
memory pressure.  If this turns out to be a real problem, we'll have to
revisit this and tame the reclaim flusher wakeups.

[hannes@cmpxchg.org: mention dirty expiration as a condition]
  Link: http://lkml.kernel.org/r/20170126174739.GA30636@cmpxchg.org
Link: http://lkml.kernel.org/r/20170123181641.23938-3-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm: vmscan: fix kswapd writeback regression".

We noticed a regression on multiple hadoop workloads when moving from
3.10 to 4.0 and 4.6, which involves kswapd getting tangled up in page
writeout, causing direct reclaim herds that also don't make progress.

I tracked it down to the thrash avoidance efforts after 3.10 that make
the kernel better at keeping use-once cache and use-many cache sorted on
the inactive and active list, with more aggressive protection of the
active list as long as there is inactive cache.  Unfortunately, our
workload's use-once cache is mostly from streaming writes.  Waiting for
writes to avoid potential reloads in the future is not a good tradeoff.

These patches do the following:

1. Wake the flushers when kswapd sees a lump of dirty pages. It's
   possible to be below the dirty background limit and still have cache
   velocity push them through the LRU. So start a-flushin'.

2. Let kswapd only write pages that have been rotated twice. This makes
   sure we really tried to get all the clean pages on the inactive list
   before resorting to horrible LRU-order writeback.

3. Move rotating dirty pages off the inactive list. Instead of churning
   or waiting on page writeback, we'll go after clean active cache. This
   might lead to thrashing, but in this state memory demand outstrips IO
   speed anyway, and reads are faster than writes.

Mel backported the series to 4.10-rc5 with one minor conflict and ran a
couple of tests on it.  Mix of read/write random workload didn't show
anything interesting.  Write-only database didn't show much difference
in performance but there were slight reductions in IO -- probably in the
noise.

simoop did show big differences although not as big as Mel expected.
This is Chris Mason's workload that similate the VM activity of hadoop.
Mel won't go through the full details but over the samples measured
during an hour it reported

                                         4.10.0-rc5            4.10.0-rc5
                                            vanilla         johannes-v1r1
Amean    p50-Read             21346531.56 (  0.00%) 21697513.24 ( -1.64%)
Amean    p95-Read             24700518.40 (  0.00%) 25743268.98 ( -4.22%)
Amean    p99-Read             27959842.13 (  0.00%) 28963271.11 ( -3.59%)
Amean    p50-Write                1138.04 (  0.00%)      989.82 ( 13.02%)
Amean    p95-Write             1106643.48 (  0.00%)    12104.00 ( 98.91%)
Amean    p99-Write             1569213.22 (  0.00%)    36343.38 ( 97.68%)
Amean    p50-Allocation          85159.82 (  0.00%)    79120.70 (  7.09%)
Amean    p95-Allocation         204222.58 (  0.00%)   129018.43 ( 36.82%)
Amean    p99-Allocation         278070.04 (  0.00%)   183354.43 ( 34.06%)
Amean    final-p50-Read       21266432.00 (  0.00%) 21921792.00 ( -3.08%)
Amean    final-p95-Read       24870912.00 (  0.00%) 26116096.00 ( -5.01%)
Amean    final-p99-Read       28147712.00 (  0.00%) 29523968.00 ( -4.89%)
Amean    final-p50-Write          1130.00 (  0.00%)      977.00 ( 13.54%)
Amean    final-p95-Write       1033216.00 (  0.00%)     2980.00 ( 99.71%)
Amean    final-p99-Write       1517568.00 (  0.00%)    32672.00 ( 97.85%)
Amean    final-p50-Allocation    86656.00 (  0.00%)    78464.00 (  9.45%)
Amean    final-p95-Allocation   211712.00 (  0.00%)   116608.00 ( 44.92%)
Amean    final-p99-Allocation   287232.00 (  0.00%)   168704.00 ( 41.27%)

The latencies are actually completely horrific in comparison to 4.4 (and
4.10-rc5 is worse than 4.9 according to historical data for reasons Mel
hasn't analysed yet).

Still, 95% of write latency (p95-write) is halved by the series and
allocation latency is way down.  Direct reclaim activity is one fifth of
what it was according to vmstats.  Kswapd activity is higher but this is
not necessarily surprising.  Kswapd efficiency is unchanged at 99% (99%
of pages scanned were reclaimed) but direct reclaim efficiency went from
77% to 99%

In the vanilla kernel, 627MB of data was written back from reclaim
context.  With the series, no data was written back.  With or without
the patch, pages are being immediately reclaimed after writeback
completes.  However, with the patch, only 1/8th of the pages are
reclaimed like this.

This patch (of 5):

We have an elaborate dirty/writeback throttling mechanism inside the
reclaim scanner, but for that to work the pages have to go through
shrink_page_list() and get counted for what they are.  Otherwise, we
mess up the LRU order and don't match reclaim speed to writeback.

Especially during deactivation, there is never a reason to skip dirty
pages; nothing is even trying to write them out from there.  Don't mess
up the LRU order for nothing, shuffle these pages along.

Link: http://lkml.kernel.org/r/20170123181641.23938-2-hannes@cmpxchg.orgSigned-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "userfaultfd: non-cooperative: add madvise() event for
MADV_REMOVE request".

These patches add notification of madvise(MADV_REMOVE) event to
non-cooperative userfaultfd monitor.

The first pacth renames EVENT_MADVDONTNEED to EVENT_REMOVE along with
relevant functions and structures.  Using _REMOVE instead of
_MADVDONTNEED describes the event semantics more clearly and I hope it's
not too late for such change in the ABI.

This patch (of 3):

The UFFD_EVENT_MADVDONTNEED purpose is to notify uffd monitor about
removal of certain range from address space tracked by userfaultfd.
Hence, UFFD_EVENT_REMOVE seems to better reflect the operation
semantics.  Respectively, 'madv_dn' field of uffd_msg is renamed to
'remove' and the madvise_userfault_dontneed callback is renamed to
userfaultfd_remove.

Link: http://lkml.kernel.org/r/1484814154-1557-2-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide the name of each memblock type with struct memblock_type.  This
allows to get rid of the function memblock_type_name() and duplicating
the type names in __memblock_dump_all().

The only memblock_type usage out of mm/memblock.c seems to be
arch/s390/kernel/crash_dump.c.  While at it, give it a name.

Link: http://lkml.kernel.org/r/20170120123456.46508-4-heiko.carstens@de.ibm.comSigned-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_hotplug_begin() assumes that it can set mem_hotplug.active_writer
and run the hotplug process without racing another thread.  Validate
this assumption with a lockdep assertion.

Link: http://lkml.kernel.org/r/148693886229.16345.1770484669403334689.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Spoofcheck can't be enabled if VF MAC is zero.
Vice versa, can't zero MAC if spoofcheck is on.

Fixes: 8f7ba3ca ('net/mlx4: Add set VF mac address support')
Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delete stray (second) function description in find_lock_page()
kernel-doc notation.

Note: scripts/kernel-doc just ignores the second function description.

Fixes: 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible")
Link: http://lkml.kernel.org/r/b037e9a3-516c-ec02-6c8e-fa5479747ba6@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: NMatthew Wilcox <mawilcox@microsoft.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's no users of zap_page_range() who wants non-NULL 'details'.
Let's drop it.

Link: http://lkml.kernel.org/r/20170118122429.43661-3-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

detail == NULL would give the same functionality as
.check_swap_entries==true.

Link: http://lkml.kernel.org/r/20170118122429.43661-2-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The only user of ignore_dirty is oom-reaper.  But it doesn't really use
it.

ignore_dirty only has effect on file pages mapped with dirty pte.  But
oom-repear skips shared VMAs, so there's no way we can dirty file pte in
them.

Link: http://lkml.kernel.org/r/20170118122429.43661-1-kirill.shutemov@linux.intel.comSigned-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

show_mem() allows to filter out node specific data which is irrelevant
to the allocation request via SHOW_MEM_FILTER_NODES.  The filtering is
done in skip_free_areas_node which skips all nodes which are not in the
mems_allowed of the current process.  This works most of the time as
expected because the nodemask shouldn't be outside of the allocating
task but there are some exceptions.  E.g.  memory hotplug might want to
request allocations from outside of the allowed nodes (see
new_node_page).

Get rid of this hardcoded behavior and push the allocation mask down the
show_mem path and use it instead of cpuset_current_mems_allowed.  NULL
nodemask is interpreted as cpuset_current_mems_allowed.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

warn_alloc is currently used for to report an allocation failure or an
allocation stall.  We print some details of the allocation request like
the gfp mask and the request order.  We do not print the allocation
nodemask which is important when debugging the reason for the allocation
failure as well.  We alreaddy print the nodemask in the OOM report.

Add nodemask to warn_alloc and print it in warn_alloc as well.

Link: http://lkml.kernel.org/r/20170117091543.25850-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

lruvec_lru_size returns the full size of the LRU list while we sometimes
need a value reduced only to eligible zones (e.g.  for lowmem requests).
inactive_list_is_low is one such user.  Later patches will add more of
them.  Add a new parameter to lruvec_lru_size and allow it filter out
zones which are not eligible for the given context.

Link: http://lkml.kernel.org/r/20170117103702.28542-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Acked-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no thp defrag option that currently allows MADV_HUGEPAGE
regions to do direct compaction and reclaim while all other thp
allocations simply trigger kswapd and kcompactd in the background and
fail immediately.

The "defer" setting simply triggers background reclaim and compaction
for all regions, regardless of MADV_HUGEPAGE, which makes it unusable
for our userspace where MADV_HUGEPAGE is being used to indicate the
application is willing to wait for work for thp memory to be available.

The "madvise" setting will do direct compaction and reclaim for these
MADV_HUGEPAGE regions, but does not trigger kswapd and kcompactd in the
background for anybody else.

For reasonable usage, there needs to be a mesh between the two options.
This patch introduces a fifth mode, "defer+madvise", that will do direct
reclaim and compaction for MADV_HUGEPAGE regions and trigger background
reclaim and compaction for everybody else so that hugepages may be
available in the near future.

A proposal to allow direct reclaim and compaction for MADV_HUGEPAGE
regions as part of the "defer" mode, making it a very powerful setting
and avoids breaking userspace, was offered:
     http://marc.info/?t=148236612700003
This additional mode is a compromise.

A second proposal to allow both "defer" and "madvise" to be selected at
the same time was also offered:
     http://marc.info/?t=148357345300001.
This is possible, but there was a concern that it might break existing
userspaces the parse the output of the defrag mode, so the fifth option
was introduced instead.

This patch also cleans up the helper function for storing to "enabled"
and "defrag" since the former supports three modes while the latter
supports five and triple_flag_store() was getting unnecessarily messy.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1701101614330.41805@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NMel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because during swap off, a swap entry may have swap_map[] ==
SWAP_HAS_CACHE (for example, just allocated).  If we return NULL in
__read_swap_cache_async(), the swap off will abort.  So when swap slot
cache is disabled, (for swap off), we will wait for page to be put into
swap cache in such race condition.  This should not be a problem for swap
slot cache, because swap slot cache should be drained after clearing
swap_slot_cache_enabled.

[ying.huang@intel.com: fix memory leak in __read_swap_cache_async()]
  Link: http://lkml.kernel.org/r/874lzt6znd.fsf@yhuang-dev.intel.com
Link: http://lkml.kernel.org/r/5e2c5f6abe8e6eb0797408897b1bba80938e9b9d.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We add per cpu caches for swap slots that can be allocated and freed
quickly without the need to touch the swap info lock.

Two separate caches are maintained for swap slots allocated and swap
slots returned.  This is to allow the swap slots to be returned to the
global pool in a batch so they will have a chance to be coaelesced with
other slots in a cluster.  We do not reuse the slots that are returned
right away, as it may increase fragmentation of the slots.

The swap allocation cache is protected by a mutex as we may sleep when
searching for empty slots in cache.  The swap free cache is protected by
a spin lock as we cannot sleep in the free path.

We refill the swap slots cache when we run out of slots, and we disable
the swap slots cache and drain the slots if the global number of slots
fall below a low watermark threshold.  We re-enable the cache agian when
the slots available are above a high watermark.

[ying.huang@intel.com: use raw_cpu_ptr over this_cpu_ptr for swap slots access]
[tim.c.chen@linux.intel.com: add comments on locks in swap_slots.h]
  Link: http://lkml.kernel.org/r/20170118180327.GA24225@linux.intel.com
Link: http://lkml.kernel.org/r/35de301a4eaa8daa2977de6e987f2c154385eb66.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Reviewed-by: NMichal Hocko <mhocko@suse.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add new functions that free unused swap slots in batches without the
need to reacquire swap info lock.  This improves scalability and reduce
lock contention.

Link: http://lkml.kernel.org/r/c25e0fcdfd237ec4ca7db91631d3b9f6ed23824e.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, the swap slots are allocated one page at a time, causing
contention to the swap_info lock protecting the swap partition on every
page being swapped.

This patch adds new functions get_swap_pages and scan_swap_map_slots to
request multiple swap slots at once.  This will reduces the lock
contention on the swap_info lock.  Also scan_swap_map_slots can operate
more efficiently as swap slots often occurs in clusters close to each
other on a swap device and it is quicker to allocate them together.

Link: http://lkml.kernel.org/r/9fec2845544371f62c3763d43510045e33d286a6.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We can avoid needlessly allocating page for swap slots that are not used
by anyone.  No pages have to be read in for these slots.

Link: http://lkml.kernel.org/r/0784b3f20b9bd3aa5552219624cb78dc4ae710c9.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: N"Huang, Ying" <ying.huang@intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch is to improve the scalability of the swap out/in via using
fine grained locks for the swap cache.  In current kernel, one address
space will be used for each swap device.  And in the common
configuration, the number of the swap device is very small (one is
typical).  This causes the heavy lock contention on the radix tree of
the address space if multiple tasks swap out/in concurrently.

But in fact, there is no dependency between pages in the swap cache.  So
that, we can split the one shared address space for each swap device
into several address spaces to reduce the lock contention.  In the
patch, the shared address space is split into 64MB trunks.  64MB is
chosen to balance the memory space usage and effect of lock contention
reduction.

The size of struct address_space on x86_64 architecture is 408B, so with
the patch, 6528B more memory will be used for every 1GB swap space on
x86_64 architecture.

One address space is still shared for the swap entries in the same 64M
trunks.  To avoid lock contention for the first round of swap space
allocation, the order of the swap clusters in the initial free clusters
list is changed.  The swap space distance between the consecutive swap
clusters in the free cluster list is at least 64M.  After the first
round of allocation, the swap clusters are expected to be freed
randomly, so the lock contention should be reduced effectively.

Link: http://lkml.kernel.org/r/735bab895e64c930581ffb0a05b661e01da82bc5.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch is to reduce the lock contention of swap_info_struct->lock
via using a more fine grained lock in swap_cluster_info for some swap
operations.  swap_info_struct->lock is heavily contended if multiple
processes reclaim pages simultaneously.  Because there is only one lock
for each swap device.  While in common configuration, there is only one
or several swap devices in the system.  The lock protects almost all
swap related operations.

In fact, many swap operations only access one element of
swap_info_struct->swap_map array.  And there is no dependency between
different elements of swap_info_struct->swap_map.  So a fine grained
lock can be used to allow parallel access to the different elements of
swap_info_struct->swap_map.

In this patch, a spinlock is added to swap_cluster_info to protect the
elements of swap_info_struct->swap_map in the swap cluster and the
fields of swap_cluster_info.  This reduced locking contention for
swap_info_struct->swap_map access greatly.

Because of the added spinlock, the size of swap_cluster_info increases
from 4 bytes to 8 bytes on the 64 bit and 32 bit system.  This will use
additional 4k RAM for every 1G swap space.

Because the size of swap_cluster_info is much smaller than the size of
the cache line (8 vs 64 on x86_64 architecture), there may be false
cache line sharing between spinlocks in swap_cluster_info.  To avoid the
false sharing in the first round of the swap cluster allocation, the
order of the swap clusters in the free clusters list is changed.  So
that, the swap_cluster_info sharing the same cache line will be placed
as far as possible.  After the first round of allocation, the order of
the clusters in free clusters list is expected to be random.  So the
false sharing should be not serious.

Compared with a previous implementation using bit_spin_lock, the
sequential swap out throughput improved about 3.2%.  Test was done on a
Xeon E5 v3 system.  The swap device used is a RAM simulated PMEM
(persistent memory) device.  To test the sequential swapping out, the
test case created 32 processes, which sequentially allocate and write to
the anonymous pages until the RAM and part of the swap device is used.

[ying.huang@intel.com: v5]
  Link: http://lkml.kernel.org/r/878tqeuuic.fsf_-_@yhuang-dev.intel.com
[minchan@kernel.org: initialize spinlock for swap_cluster_info]
  Link: http://lkml.kernel.org/r/1486434945-29753-1-git-send-email-minchan@kernel.org
[hughd@google.com: annotate nested locking for cluster lock]
  Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1702161050540.21773@eggly.anvils
Link: http://lkml.kernel.org/r/dbb860bbd825b1aaba18988015e8963f263c3f0d.1484082593.git.tim.c.chen@linux.intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net> escreveu:
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On 32-bit powerpc the ELF PLT sections of binaries (built with
--bss-plt, or with a toolchain which defaults to it) look like this:

  [17] .sbss             NOBITS          0002aff8 01aff8 000014 00  WA  0   0  4
  [18] .plt              NOBITS          0002b00c 01aff8 000084 00 WAX  0   0  4
  [19] .bss              NOBITS          0002b090 01aff8 0000a4 00  WA  0   0  4

Which results in an ELF load header:

  Type           Offset   VirtAddr   PhysAddr   FileSiz MemSiz  Flg Align
  LOAD           0x019c70 0x00029c70 0x00029c70 0x01388 0x014c4 RWE 0x10000

This is all correct, the load region containing the PLT is marked as
executable.  Note that the PLT starts at 0002b00c but the file mapping
ends at 0002aff8, so the PLT falls in the 0 fill section described by
the load header, and after a page boundary.

Unfortunately the generic ELF loader ignores the X bit in the load
headers when it creates the 0 filled non-file backed mappings.  It
assumes all of these mappings are RW BSS sections, which is not the case
for PPC.

gcc/ld has an option (--secure-plt) to not do this, this is said to
incur a small performance penalty.

Currently, to support 32-bit binaries with PLT in BSS kernel maps
*entire brk area* with executable rights for all binaries, even
--secure-plt ones.

Stop doing that.

Teach the ELF loader to check the X bit in the relevant load header and
create 0 filled anonymous mappings that are executable if the load
header requests that.

Test program showing the difference in /proc/$PID/maps:

int main() {
	char buf[16*1024];
	char *p = malloc(123); /* make "[heap]" mapping appear */
	int fd = open("/proc/self/maps", O_RDONLY);
	int len = read(fd, buf, sizeof(buf));
	write(1, buf, len);
	printf("%p\n", p);
	return 0;
}

Compiled using: gcc -mbss-plt -m32 -Os test.c -otest

Unpatched ppc64 kernel:
00100000-00120000 r-xp 00000000 00:00 0                                  [vdso]
0fe10000-0ffd0000 r-xp 00000000 fd:00 67898094                           /usr/lib/libc-2.17.so
0ffd0000-0ffe0000 r--p 001b0000 fd:00 67898094                           /usr/lib/libc-2.17.so
0ffe0000-0fff0000 rw-p 001c0000 fd:00 67898094                           /usr/lib/libc-2.17.so
10000000-10010000 r-xp 00000000 fd:00 100674505                          /home/user/test
10010000-10020000 r--p 00000000 fd:00 100674505                          /home/user/test
10020000-10030000 rw-p 00010000 fd:00 100674505                          /home/user/test
10690000-106c0000 rwxp 00000000 00:00 0                                  [heap]
f7f70000-f7fa0000 r-xp 00000000 fd:00 67898089                           /usr/lib/ld-2.17.so
f7fa0000-f7fb0000 r--p 00020000 fd:00 67898089                           /usr/lib/ld-2.17.so
f7fb0000-f7fc0000 rw-p 00030000 fd:00 67898089                           /usr/lib/ld-2.17.so
ffa90000-ffac0000 rw-p 00000000 00:00 0                                  [stack]
0x10690008

Patched ppc64 kernel:
00100000-00120000 r-xp 00000000 00:00 0                                  [vdso]
0fe10000-0ffd0000 r-xp 00000000 fd:00 67898094                           /usr/lib/libc-2.17.so
0ffd0000-0ffe0000 r--p 001b0000 fd:00 67898094                           /usr/lib/libc-2.17.so
0ffe0000-0fff0000 rw-p 001c0000 fd:00 67898094                           /usr/lib/libc-2.17.so
10000000-10010000 r-xp 00000000 fd:00 100674505                          /home/user/test
10010000-10020000 r--p 00000000 fd:00 100674505                          /home/user/test
10020000-10030000 rw-p 00010000 fd:00 100674505                          /home/user/test
10180000-101b0000 rw-p 00000000 00:00 0                                  [heap]
                  ^^^^ this has changed
f7c60000-f7c90000 r-xp 00000000 fd:00 67898089                           /usr/lib/ld-2.17.so
f7c90000-f7ca0000 r--p 00020000 fd:00 67898089                           /usr/lib/ld-2.17.so
f7ca0000-f7cb0000 rw-p 00030000 fd:00 67898089                           /usr/lib/ld-2.17.so
ff860000-ff890000 rw-p 00000000 00:00 0                                  [stack]
0x10180008

The patch was originally posted in 2012 by Jason Gunthorpe
and apparently ignored:

https://lkml.org/lkml/2012/9/30/138

Lightly run-tested.

Link: http://lkml.kernel.org/r/20161215131950.23054-1-dvlasenk@redhat.comSigned-off-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Tested-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using a sparse memory model memmap_init_zone() when invoked with
the MEMMAP_EARLY context will skip over pages which aren't valid - ie.
which aren't in a populated region of the sparse memory map.  However if
the memory map is extremely sparse then it can spend a long time
linearly checking each PFN in a large non-populated region of the memory
map & skipping it in turn.

When CONFIG_HAVE_MEMBLOCK_NODE_MAP is enabled, we have sufficient
information to quickly discover the next valid PFN given an invalid one
by searching through the list of memory regions & skipping forwards to
the first PFN covered by the memory region to the right of the
non-populated region.  Implement this in order to speed up
memmap_init_zone() for systems with extremely sparse memory maps.

James said "I have tested this patch on a virtual model of a Samurai CPU
with a sparse memory map.  The kernel boot time drops from 109 to
62 seconds. "

Link: http://lkml.kernel.org/r/20161125185518.29885-1-paul.burton@imgtec.comSigned-off-by: NPaul Burton <paul.burton@imgtec.com>
Tested-by: NJames Hartley <james.hartley@imgtec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A "compact_daemon_wake" vmstat exists that represents the number of
times kcompactd has woken up.  This doesn't represent how much work it
actually did, though.

It's useful to understand how much compaction work is being done by
kcompactd versus other methods such as direct compaction and explicitly
triggered per-node (or system) compaction.

This adds two new vmstats: "compact_daemon_migrate_scanned" and
"compact_daemon_free_scanned" to represent the number of pages kcompactd
has scanned as part of its migration scanner and freeing scanner,
respectively.

These values are still accounted for in the general
"compact_migrate_scanned" and "compact_free_scanned" for compatibility.

It could be argued that explicitly triggered compaction could also be
tracked separately, and that could be added if others find it useful.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1612071749390.69852@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are no longer used outside mm/filemap.c, so un-export them and
make them static where possible.  These were exported specifically for
NFS use in commit a4796e37 ("MM: export page_wakeup functions").

Link: http://lkml.kernel.org/r/20170103182234.30141-3-npiggin@gmail.comSigned-off-by: NNicholas Piggin <npiggin@gmail.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently userfault relies on vma_is_anonymous and vma_is_hugetlb to
ensure compatibility of a VMA with userfault.  Introduction of
vma_is_shmem allows detection if tmpfs backed VMAs, so that they may be
used with userfaultfd.  Current implementation presumes usage of
vma_is_shmem only by slow path routines in userfaultfd, therefore the
vma_is_shmem is not made inline to leave the few remaining free bits in
vm_flags.

Link: http://lkml.kernel.org/r/20161216144821.5183-30-aarcange@redhat.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

shmem_mcopy_atomic_pte is the low level routine that implements the
userfaultfd UFFDIO_COPY command.  It is based on the existing
mcopy_atomic_pte routine with modifications for shared memory pages.

Link: http://lkml.kernel.org/r/20161216144821.5183-29-aarcange@redhat.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for VM_FAULT_RETRY to follow_hugetlb_page() so that
get_user_pages_unlocked/locked and "nonblocking/FOLL_NOWAIT" features
will work on hugetlbfs.

This is required for fully functional userfaultfd non-present support on
hugetlbfs.

Link: http://lkml.kernel.org/r/20161216144821.5183-25-aarcange@redhat.comSigned-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The new routine copy_huge_page_from_user() uses kmap_atomic() to map
PAGE_SIZE pages.  However, this prevents page faults in the subsequent
call to copy_from_user().  This is OK in the case where the routine is
copied with mmap_sema held.  However, in another case we want to allow
page faults.  So, add a new argument allow_pagefault to indicate if the
routine should allow page faults.

[dan.carpenter@oracle.com: unmap the correct pointer]
  Link: http://lkml.kernel.org/r/20170113082608.GA3548@mwanda
[akpm@linux-foundation.org: kunmap() takes a page*, per Hugh]
Link: http://lkml.kernel.org/r/20161216144821.5183-20-aarcange@redhat.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hugetlb_mcopy_atomic_pte is the low level routine that implements the
userfaultfd UFFDIO_COPY command.  It is based on the existing
mcopy_atomic_pte routine with modifications for huge pages.

Link: http://lkml.kernel.org/r/20161216144821.5183-18-aarcange@redhat.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

userfaultfd UFFDIO_COPY allows user level code to copy data to a page at
fault time.  The data is copied from user space to a newly allocated
huge page.  The new routine copy_huge_page_from_user performs this copy.

Link: http://lkml.kernel.org/r/20161216144821.5183-17-aarcange@redhat.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the page is punched out of the address space the uffd reader should
know this and zeromap the respective area in case of the #PF event.

Link: http://lkml.kernel.org/r/20161216144821.5183-14-aarcange@redhat.comSigned-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Optimize the mremap_userfaultfd_complete() interface to pass only the
vm_userfaultfd_ctx pointer through the stack as a microoptimization.

Link: http://lkml.kernel.org/r/20161216144821.5183-13-aarcange@redhat.comSigned-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-by: NHillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The event denotes that an area [start:end] moves to different location.
Length change isn't reported as "new" addresses, if they appear on the
uffd reader side they will not contain any data and the latter can just
zeromap them.

Waiting for the event ACK is also done outside of mmap sem, as for fork
event.

Link: http://lkml.kernel.org/r/20161216144821.5183-12-aarcange@redhat.comSigned-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the mm with uffd-ed vmas fork()-s the respective vmas notify their
uffds with the event which contains a descriptor with new uffd.  This
new descriptor can then be used to get events from the child and
populate its mm with data.  Note, that there can be different uffd-s
controlling different vmas within one mm, so first we should collect all
those uffds (and ctx-s) in a list and then notify them all one by one
but only once per fork().

The context is created at fork() time but the descriptor, file struct
and anon inode object is created at event read time.  So some trickery
is added to the userfaultfd_ctx_read() to handle the ctx queues' locking
vs file creation.

Another thing worth noticing is that the task that fork()-s waits for
the uffd event to get processed WITHOUT the mmap sem.

[aarcange@redhat.com: build warning fix]
  Link: http://lkml.kernel.org/r/20161216144821.5183-10-aarcange@redhat.com
Link: http://lkml.kernel.org/r/20161216144821.5183-9-aarcange@redhat.comSigned-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michael Rapoport <RAPOPORT@il.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>