Merge tag 'renesas-dt3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.17" from Simon
Horman:

* Initialise SCI using DT when booting the kzm9g, armadillo800eva,
  ape6evm and bockw boards without legacy-C code.

* tag 'renesas-dt3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (24 commits)
  ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT
  ARM: shmobile: sh73a0: Add SCIF nodes
  ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT
  ARM: shmobile: r8a7740: Add SCIF nodes
  ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT
  ARM: shmobile: r8a73a4: Add SCIF nodes
  ARM: shmobile: bockw-reference: Initialise SCIF device using DT
  ARM: shmobile: r8a7778: Add SCIF nodes
  ARM: shmobile: sh73a0: add SCI clock support for DT
  ARM: shmobile: r8a7740: correct SCI clock support for DT
  ARM: shmobile: r8a73a4: add SCI clock support for DT
  ARM: shmobile: r8a7778: add SCI clock support for DT
  ARM: shmobile: r8a7790: lager: use iic cores instead of i2c
  ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator
  ARM: shmobile: kzm9g-reference: Remove early_printk from command line
  ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line
  ARM: shmobile: r8a7779: Consistently use tabs for indentation
  ARM: shmobile: henninger: Consistently use tabs for indentation
  ARM: shmobile: henninger: enable internal PCI
  ARM: shmobile: koelsch: enable internal PCI
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

add #reset-cells to socfpga.dtsi. This was missing from the
latest updates and caused the socfpga reset controller to fail
to load like so:

ffd05000.rstmgr: /soc/rstmgr@ffd05000 missing #reset-cells property
probe of ffd05000.rstmgr failed with error -22
Signed-off-by: NVince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'ux500-devicetree-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Merge "Ux500 devicetree changes for v3.17" from Linus Walleij:

Ux500 device tree patches for v3.17:
- Add regulators to STMPE expanders
- Add proper DMA channels for all SD/MMC blocks
- Add sensors to the device tree

* tag 'ux500-devicetree-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: add misc sensors to the device trees
  ARM: ux500: add some DB8500 DMA channel info
  ARM: ux500: add VCC and VIO regulators to STMPE IC
  + Linux 3.16-rc4
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge "at91: dt for 3.17 #1" from Nicolas Ferre:

First DT update for 3.17:
- move of crystals DT definitions to the /clocks node
- addition of clock entries for sound for CCF enabled platforms
- addition of DMA and DMA + nand on at91sam9rl
- move to CCF for all not-converted-yet AT91 SoCs: at91rm9200, at91sam9260/9g20,
  at91sam9g45 family and at91sam9263

* tag 'at91-dt' of git://github.com/at91linux/linux-at91: (43 commits)
  ARM: at91/dt: usb_a9263: define crystals frequencies
  ARM: at91/dt: tny_a9263: define crystals frequencies
  ARM: at91/dt: sam9263ek: define crystals frequencies
  ARM: at91: move at91sam9263 SoC to the CCF
  ARM: at91/dt: sam9263: define clocks
  ARM: at91: prepare common clk transition for sam9263
  ARM: at91/dt: cosino define crystals frequencies
  ARM: at91/dt: pm9g45: crystals frequencies
  ARM: at91/dt: sam9m10g45ek: define crystals frequencies
  ARM: at91: move at91sam9g45 SoC to the CCF
  ARM: at91/dt: sam9g45: define clocks
  ARM: at91: prepare common clk transition for sam9g45
  ARM: at91/dt: kizbox: define main crystal frequency
  ARM: at91/dt: animeo_ip: define crystals frequencies
  ARM: at91/dt: ethernut5: define crystals frequencies
  ARM: at91/dt: evk-pro3: define slow crytal frequency
  ARM: at91/dt: aks-cdu: define slow crytal frequency
  ARM: at91/dt: ge863-pro3: define main crystal frequency
  ARM: at91/dt: mpa1600: define crytals frequencies
  ARM: at91/dt: qil_a9260: define crystals frequencies
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-dt2-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.17" from Simon
Horman:

- Extend hardware coverage
  * Add DVC support for sound nodes on r8a7791 and r8a7790
  * Enable internal PCI on r8a7790/lager

* tag 'renesas-dt2-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7791: add DVC support for sound node on DTSI
  ARM: shmobile: r8a7790: add DVC support for sound node on DTSI
  ARM: shmobile: lager: enable internal PCI
  ARM: shmobile: r8a7790: add internal PCI bridge nodes
Signed-off-by: NOlof Johansson <olof@lixom.net>

Initialise SCIF device using DT when booting armadillo800eva
using DT reference.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This describes all of the SCIF hardware of the sh73a0.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Initialise SCIF device using DT when booting armadillo800eva
using DT reference.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This describes all of the SCIF hardware of the r8a7740.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Initialise SCIF device using DT when booting ape6evm
using DT reference.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This describes all of the SCIF hardware of the r8a73a4.
Each node is disabled and may be enabled as necessary
by board DTS files.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Initialise SCIF device using DT when booting bockw
using DT reference.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This describes all of the SCIF hardware of the r8a7778.
Each node is disabled and may be enabled as necessary
by board DTS files.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

When initialising SCI devices their names will be .serial
not .sci.

This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This will be used when initialising SCI devices using DT
until common clock framework support is added.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This will be used when initialising SCI devices using DT
until common clock framework support is added.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

On Lager board, i2c and iic cores can be interchanged since they can be
muxed to the same wires. Commit e489c2a9
("ARM: shmobile: lager: enable i2c devices") activated the i2c cores,
yet the iic cores should be default since they have the more interesting
features for generic use cases, i.e. SMBUS_QUICK and DMA (yet to be
supported).
Reported-by: NKhiem Nguyen <khiem.nguyen.xt@renesas.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

I2C bus for VDD MPU regulator is IIC3, not I2C3.
Signed-off-by: NKhiem Nguyen <khiem.nguyen.xt@renesas.com>
Reviewed-by: NWolfram Sang <wsa@sang-engineering.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Pull "CCF migration for 3.17" from Alexandre Belloni:
"This is the switch to CCF for all the remaining at91 SoCs and boards"

Define Calao USB-A9263 main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Calao TNY-A9263 main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define at91sam9263ek main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch removes the selection of AT91_USE_OLD_CLK when selecting
at91sam9263 SoC support. This will automatically enable COMMON_CLK_AT91
option and add support for at91 common clock implementation.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define the at91sam9263 clocks in the SoC dtsi file.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Enclose the sam9263 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
 #endif"
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Cosino boards main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Ronetix pm9g45 main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define at91sam9m10g45ek main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This patch removes the selection of AT91_USE_OLD_CLK when selecting at91sam9g45
SoC support. This will automatically enable COMMON_CLK_AT91 option and add
support for at91 common clock implementation.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define the at91sam9g45 clocks in the SoC dtsi file.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Enclose the sam9g45 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91)
 #endif"
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define kizbox board's main crystal frequency.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Somfy Animeo IP main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define egnite Ethernut 5 main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Telit EVK-PRO3 slow crystal frequency
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define AK signal CDU slow crystal frequency
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Telit GE863-PRO3 main crystal frequency.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Define Phontech MPA 1600 main and slow crystals frequencies.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>