Use the new extended capabilities advertising to advertise
the fact that operating mode notification is supported.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Make all the parsed IE pointers const, and propagate
the change to all the users etc.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Handle the operating mode notification action frame.
When the supported streams or the bandwidth change
let the driver and rate control algorithm know.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Define the action frame format, the VHT category
and its action types and the field format and EID
for operating mode notifications. The frame may
be used outside of VHT context as well, so don't
include "VHT" in the names.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The platform data is used not only by wlcore-based drivers, but also
by wl1251.  Move it up in the directory hierarchy to reflect this.

Additionally, make it truly optional.  At the moment, disabling
platform data while wl1251_sdio or wlcore_sdio are enabled doesn't
work, but it will be necessary when device tree support is
implemented.
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>

We can't pass pointers from the platform data to the modules, because
with DT it cannot be done.  Those pointers are not set by the board
files anyway.  It's the bus modules that set them, so they can be
safely removed from the platform data without changing any board
files.

Create a new structure that the bus modules pass to wlcore.  This
structure contains the if_ops pointers and a pointer to the actual
platform data.
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>

Add routines to
- maintain a PS mode for each peer and a non-peer PS mode
- indicate own PS mode in transmitted frames
- track neighbor STAs power modes
- buffer frames when neighbors are in PS mode
- add TIM and Awake Window IE to beacons
- release frames in Mesh Peer Service Periods

Add local_pm to sta_info to represent the link-specific power
mode at this station towards the remote station. When a peer
link is established, use the default power mode stored in mesh
config. Update the PS status if the peering status of a neighbor
changes.
Maintain a mesh power mode for non-peer mesh STAs. Set the
non-peer power mode to active mode during peering. Authenticated
mesh peering is currently not working when either node is
configured to be in power save mode.

Indicate the current power mode in transmitted frames. Use QoS
Nulls to indicate mesh power mode transitions.
For performance reasons, calls to the function setting the frame
flags are placed in HWMP routing routines, as there the STA
pointer is already available.

Add peer_pm to sta_info to represent the peer's link-specific
power mode towards the local station. Add nonpeer_pm to
represent the peer's power mode towards all non-peer stations.
Track power modes based on received frames.

Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS
neighbor counter and group-addressed frame buffer).

Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame
buffering routines in the tx path. Update num_sta_ps to buffer
and release group-addressed frames after DTIM beacons.

Announce the awake window duration in beacons if in light or
deep sleep mode towards any peer or non-peer. Create a TIM IE
similarly to AP mode and add it to mesh beacons. Parse received
Awake Window IEs and check TIM IEs for buffered frames.

Release frames towards peers in mesh Peer Service Periods. Use
the corresponding trigger frames and monitor the MPSP status.
Append a QoS Null as trigger frame if neccessary to properly end
the MPSP. Currently, in HT channels MPSPs behave imperfectly and
show large delay spikes and frame losses.
Signed-off-by: NMarco Porsch <marco@cozybit.com>
Signed-off-by: NIvan Bezyazychnyy <ivan.bezyazychnyy@gmail.com>
Signed-off-by: NMike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Inside Secure microread is an HCI based NFC chipset.
This initial support includes reader and p2p (Target and initiator) modes.
Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com>
Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The old bcm47xx gpio code had support for gpio_to_irq, but the new
code did not provide this function, but returned -ENXIO all the time.
This patch adds the missing function.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The old bcm47xx gpio code had support for gpio_to_irq, but the new
code did not provide this function, but returned -ENXIO all the time.
This patch adds the missing function.

arch/mips/bcm47xx/wgt634u.c calls gpio_to_irq() and got the correct irq
number with the old gpio handling code. With this patch the code in
wgt634u.c should work again. I do not have a wgt634u to test this.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Reference: IEEE 802.11-2012 8.4.2.27.3 "AKM suites"
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The default irqflag assignment for the I2S core on some Broadcom
4716/4748 devices is invalid and needs to be corrected (from the
Broadcom SDK).
Signed-off-by: NNathan Hintz <nlhintz@hotmail.com>
Acked-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Update the PCI configuration for BCM4706 and BCM4716 per the 2011
Broadcom SDK.
Signed-off-by: NNathan Hintz <nlhintz@hotmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.
Signed-off-by: NNathan Hintz <nlhintz@hotmail.com>
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This member is not needed any more.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Support the HT notify channel width action frame
to update the rate scaling about the bandwidth
the peer can receive in.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Use __packed instead of __attribute__((packed)).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

define bits for 'capability info', as in recent spec edition
IEEE802.11-2012

Also, add mask for 2-bit field 'bss type', as it is in 802.11ad
Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This patch removes map_info from bio-based device mapper targets.
map_info is still used for request-based targets.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

This patch moves target_request_nr from map_info to dm_target_io and
makes it accessible with dm_bio_get_target_request_nr.

This patch is a preparation for the next patch that removes map_info.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Introduce a field per_bio_data_size in struct dm_target.

Targets can set this field in the constructor. If a target sets this
field to a non-zero value, "per_bio_data_size" bytes of auxiliary data
are allocated for each bio submitted to the target. These data can be
used for any purpose by the target and help us improve performance by
removing some per-target mempools.

Per-bio data is accessed with dm_per_bio_data. The
argument data_size must be the same as the value per_bio_data_size in
dm_target.

If the target has a pointer to per_bio_data, it can get a pointer to
the bio with dm_bio_from_per_bio_data() function (data_size must be the
same as the value passed to dm_per_bio_data).
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Allow targets to opt in to WRITE SAME support by setting
'num_write_same_requests' in the dm_target structure.

A dm device will only advertise WRITE SAME support if all its
targets and all its underlying devices support it.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Commit 263a523d ("linux/kernel.h: Fix warning seen with W=1 due to
change in DIV_ROUND_CLOSEST") fixes a warning seen with W=1 due to
change in DIV_ROUND_CLOSEST.

Unfortunately, the C compiler converts divide operations with unsigned
divisors to unsigned, even if the dividend is signed and negative (for
example, -10 / 5U = 858993457).  The C standard says "If one operand has
unsigned int type, the other operand is converted to unsigned int", so
the compiler is not to blame.  As a result, DIV_ROUND_CLOSEST(0, 2U) and
similar operations now return bad values, since the automatic conversion
of expressions such as "0 - 2U/2" to unsigned was not taken into
account.

Fix by checking for the divisor variable type when deciding which
operation to perform.  This fixes DIV_ROUND_CLOSEST(0, 2U), but still
returns bad values for negative dividends divided by unsigned divisors.
Mark the latter case as unsupported.

One observed effect of this problem is that the s2c_hwmon driver reports
a value of 4198403 instead of 0 if the ADC reads 0.

Other impact is unpredictable.  Problem is seen if the divisor is an
unsigned variable or constant and the dividend is less than (divisor/2).
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Reported-by: NJuergen Beisert <jbe@pengutronix.de>
Tested-by: NJuergen Beisert <jbe@pengutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: <stable@vger.kernel.org>	[3.7.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a series of scripts are executed, each triggering module loading via
unprintable bytes in the script header, kernel stack contents can leak
into the command line.

Normally execution of binfmt_script and binfmt_misc happens recursively.
However, when modules are enabled, and unprintable bytes exist in the
bprm->buf, execution will restart after attempting to load matching
binfmt modules.  Unfortunately, the logic in binfmt_script and
binfmt_misc does not expect to get restarted.  They leave bprm->interp
pointing to their local stack.  This means on restart bprm->interp is
left pointing into unused stack memory which can then be copied into the
userspace argv areas.

After additional study, it seems that both recursion and restart remains
the desirable way to handle exec with scripts, misc, and modules.  As
such, we need to protect the changes to interp.

This changes the logic to require allocation for any changes to the
bprm->interp.  To avoid adding a new kmalloc to every exec, the default
value is left as-is.  Only when passing through binfmt_script or
binfmt_misc does an allocation take place.

For a proof of concept, see DoTest.sh from:

   http://www.halfdog.net/Security/2012/LinuxKernelBinfmtScriptStackDataDisclosure/Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Where we can pass in LOOKUP_DIRECTORY or LOOKUP_REVAL. Any other flags
passed in here are currently ignored.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This function is expected to be called from path-based syscalls to help
them decide whether to try the lookup and call again in the event that
they got an -ESTALE return back on an earier try.

Currently, we only retry the call once on an ESTALE error, but in the
event that we decide that that's not enough in the future, we should be
able to change the logic in this helper without too much effort.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Commit 8e22cc88 removes the (un)lock_super
function definitions but forgets to remove their prototypes.
Signed-off-by: NAlessio Igor Bogani <abogani@kernel.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Removed vmtruncate
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Removed vmtruncate
Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Mark as cancelled an operation that is in progress rather than pending at the
time it is cancelled, and call fscache_complete_op() to cancel an operation so
that blocked ops can be started.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Convert the fscache_object event IDs from #defines into an enum.  Also add an
extra label to the enum to carry the event count and redefine the event mask
in terms of that.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Make a more complete truncate operation available to CacheFiles (including
security checks and suchlike) so that it can use this to clear invalidated
cache files.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>

Provide a proper invalidation method rather than relying on the netfs retiring
the cookie it has and getting a new one.  The problem with this is that isn't
easy for the netfs to make sure that it has completed/cancelled all its
outstanding storage and retrieval operations on the cookie it is retiring.

Instead, have the cache provide an invalidation method that will cancel or wait
for all currently outstanding operations before invalidating the cache, and
will cause new operations to queue up behind that.  Whilst invalidation is in
progress, some requests will be rejected until the cache can stack a barrier on
the operation queue to cause new operations to be deferred behind it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Fix the state management of internal fscache operations and the accounting of
what operations are in what states.

This is done by:

 (1) Give struct fscache_operation a enum variable that directly represents the
     state it's currently in, rather than spreading this knowledge over a bunch
     of flags, who's processing the operation at the moment and whether it is
     queued or not.

     This makes it easier to write assertions to check the state at various
     points and to prevent invalid state transitions.

 (2) Add an 'operation complete' state and supply a function to indicate the
     completion of an operation (fscache_op_complete()) and make things call
     it.  The final call to fscache_put_operation() can then check that an op
     in the appropriate state (complete or cancelled).

 (3) Adjust the use of object->n_ops, ->n_in_progress, ->n_exclusive to better
     govern the state of an object:

	(a) The ->n_ops is now the number of extant operations on the object
	    and is now decremented by fscache_put_operation() only.

	(b) The ->n_in_progress is simply the number of objects that have been
	    taken off of the object's pending queue for the purposes of being
	    run.  This is decremented by fscache_op_complete() only.

	(c) The ->n_exclusive is the number of exclusive ops that have been
	    submitted and queued or are in progress.  It is decremented by
	    fscache_op_complete() and by fscache_cancel_op().

     fscache_put_operation() and fscache_operation_gc() now no longer try to
     clean up ->n_exclusive and ->n_in_progress.  That was leading to double
     decrements against fscache_cancel_op().

     fscache_cancel_op() now no longer decrements ->n_ops.  That was leading to
     double decrements against fscache_put_operation().

     fscache_submit_exclusive_op() now decides whether it has to queue an op
     based on ->n_in_progress being > 0 rather than ->n_ops > 0 as the latter
     will persist in being true even after all preceding operations have been
     cancelled or completed.  Furthermore, if an object is active and there are
     runnable ops against it, there must be at least one op running.

 (4) Add a remaining-pages counter (n_pages) to struct fscache_retrieval and
     provide a function to record completion of the pages as they complete.

     When n_pages reaches 0, the operation is deemed to be complete and
     fscache_op_complete() is called.

     Add calls to fscache_retrieval_complete() anywhere we've finished with a
     page we've been given to read or allocate for.  This includes places where
     we just return pages to the netfs for reading from the server and where
     accessing the cache fails and we discard the proposed netfs page.

The bugs in the unfixed state management manifest themselves as oopses like the
following where the operation completion gets out of sync with return of the
cookie by the netfs.  This is possible because the cache unlocks and returns
all the netfs pages before recording its completion - which means that there's
nothing to stop the netfs discarding them and returning the cookie.


FS-Cache: Cookie 'NFS.fh' still has outstanding reads
------------[ cut here ]------------
kernel BUG at fs/fscache/cookie.c:519!
invalid opcode: 0000 [#1] SMP
CPU 1
Modules linked in: cachefiles nfs fscache auth_rpcgss nfs_acl lockd sunrpc

Pid: 400, comm: kswapd0 Not tainted 3.1.0-rc7-fsdevel+ #1090                  /DG965RY
RIP: 0010:[<ffffffffa007050a>]  [<ffffffffa007050a>] __fscache_relinquish_cookie+0x170/0x343 [fscache]
RSP: 0018:ffff8800368cfb00  EFLAGS: 00010282
RAX: 000000000000003c RBX: ffff880023cc8790 RCX: 0000000000000000
RDX: 0000000000002f2e RSI: 0000000000000001 RDI: ffffffff813ab86c
RBP: ffff8800368cfb50 R08: 0000000000000002 R09: 0000000000000000
R10: ffff88003a1b7890 R11: ffff88001df6e488 R12: ffff880023d8ed98
R13: ffff880023cc8798 R14: 0000000000000004 R15: ffff88003b8bf370
FS:  0000000000000000(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000008ba008 CR3: 0000000023d93000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kswapd0 (pid: 400, threadinfo ffff8800368ce000, task ffff88003b8bf040)
Stack:
 ffff88003b8bf040 ffff88001df6e528 ffff88001df6e528 ffffffffa00b46b0
 ffff88003b8bf040 ffff88001df6e488 ffff88001df6e620 ffffffffa00b46b0
 ffff88001ebd04c8 0000000000000004 ffff8800368cfb70 ffffffffa00b2c91
Call Trace:
 [<ffffffffa00b2c91>] nfs_fscache_release_inode_cookie+0x3b/0x47 [nfs]
 [<ffffffffa008f25f>] nfs_clear_inode+0x3c/0x41 [nfs]
 [<ffffffffa0090df1>] nfs4_evict_inode+0x2f/0x33 [nfs]
 [<ffffffff810d8d47>] evict+0xa1/0x15c
 [<ffffffff810d8e2e>] dispose_list+0x2c/0x38
 [<ffffffff810d9ebd>] prune_icache_sb+0x28c/0x29b
 [<ffffffff810c56b7>] prune_super+0xd5/0x140
 [<ffffffff8109b615>] shrink_slab+0x102/0x1ab
 [<ffffffff8109d690>] balance_pgdat+0x2f2/0x595
 [<ffffffff8103e009>] ? process_timeout+0xb/0xb
 [<ffffffff8109dba3>] kswapd+0x270/0x289
 [<ffffffff8104c5ea>] ? __init_waitqueue_head+0x46/0x46
 [<ffffffff8109d933>] ? balance_pgdat+0x595/0x595
 [<ffffffff8104bf7a>] kthread+0x7f/0x87
 [<ffffffff813ad6b4>] kernel_thread_helper+0x4/0x10
 [<ffffffff81026b98>] ? finish_task_switch+0x45/0xc0
 [<ffffffff813abcdd>] ? retint_restore_args+0xe/0xe
 [<ffffffff8104befb>] ? __init_kthread_worker+0x53/0x53
 [<ffffffff813ad6b0>] ? gs_change+0xb/0xb
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Make fscache_relinquish_cookie() log a warning and wait if there are any
outstanding reads left on the cookie it was given.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Under some circumstances CacheFiles defers the marking of pages with PG_fscache
so that it can take advantage of pagevecs to reduce the number of calls to
fscache_mark_pages_cached() and the netfs's hook to keep track of this.

There are, however, two problems with this:

 (1) It can lead to the PG_fscache mark being applied _after_ the page is set
     PG_uptodate and unlocked (by the call to fscache_end_io()).

 (2) CacheFiles's ref on the page is dropped immediately following
     fscache_end_io() - and so may not still be held when the mark is applied.
     This can lead to the page being passed back to the allocator before the
     mark is applied.

Fix this by, where appropriate, marking the page before calling
fscache_end_io() and releasing the page.  This means that we can't take
advantage of pagevecs and have to make a separate call for each page to the
marking routines.

The symptoms of this are Bad Page state errors cropping up under memory
pressure, for example:

BUG: Bad page state in process tar  pfn:002da
page:ffffea0000009fb0 count:0 mapcount:0 mapping:          (null) index:0x1447
page flags: 0x1000(private_2)
Pid: 4574, comm: tar Tainted: G        W   3.1.0-rc4-fsdevel+ #1064
Call Trace:
 [<ffffffff8109583c>] ? dump_page+0xb9/0xbe
 [<ffffffff81095916>] bad_page+0xd5/0xea
 [<ffffffff81095d82>] get_page_from_freelist+0x35b/0x46a
 [<ffffffff810961f3>] __alloc_pages_nodemask+0x362/0x662
 [<ffffffff810989da>] __do_page_cache_readahead+0x13a/0x267
 [<ffffffff81098942>] ? __do_page_cache_readahead+0xa2/0x267
 [<ffffffff81098d7b>] ra_submit+0x1c/0x20
 [<ffffffff8109900a>] ondemand_readahead+0x28b/0x29a
 [<ffffffff81098ee2>] ? ondemand_readahead+0x163/0x29a
 [<ffffffff810990ce>] page_cache_sync_readahead+0x38/0x3a
 [<ffffffff81091d8a>] generic_file_aio_read+0x2ab/0x67e
 [<ffffffffa008cfbe>] nfs_file_read+0xa4/0xc9 [nfs]
 [<ffffffff810c22c4>] do_sync_read+0xba/0xfa
 [<ffffffff81177a47>] ? security_file_permission+0x7b/0x84
 [<ffffffff810c25dd>] ? rw_verify_area+0xab/0xc8
 [<ffffffff810c29a4>] vfs_read+0xaa/0x13a
 [<ffffffff810c2a79>] sys_read+0x45/0x6c
 [<ffffffff813ac37b>] system_call_fastpath+0x16/0x1b

As can be seen, PG_private_2 (== PG_fscache) is set in the page flags.

Instrumenting fscache_mark_pages_cached() to verify whether page->mapping was
set appropriately showed that sometimes it wasn't.  This led to the discovery
that sometimes the page has apparently been reclaimed by the time the marker
got to see it.
Reported-by: NM. Stevens <m@tippett.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

The code that relied on that flag was ripped out of btrfs quite some
time ago, and never added back. Josef indicated that he was going to
take a different approach to the problem in btrfs, and that we
could just eliminate this flag.

Cc: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Documentation says that code requiring dma-buf should add it to
select, so inline fallbacks are not going to be used. A link error
will make it obvious what went wrong, instead of silently doing
nothing at runtime.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRob Clark <rob.clark@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>

note that they are relying on access_ok() already checked by caller.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>