Signed-off-by: NSteve French <sfrench@us.ibm.com>

Signed-off-by: NSteve French <sfrench@us.ibm.com>

servers have same tid and we try to match oplock break to wrong tid.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

	- slow down negprot 1ms during mount when RFC1001 over port 139
	to give buggy servers time to clear sess_init
	- remap some plausible but incorrect SMB return codes to the
	right ones in truncate and hardlink paths
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This patch fixes bugs in reiserfs where unsigned integers were checked
whether they are less then 0.
Signed-off-by: NVladimir V. Saveliev <vs@namesys.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NHans Reiser <reiser@namesys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

numa_maps should not scan over huge vmas in order not to cause problems for
non IA64 platforms that may have pte entries pointing to huge pages in a
variety of ways in their page tables.  Add a simple check to ignore vmas
containing huge pages.
Signed-off-by: NChristoph Lameter <clameter@engr.sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On some platforms readq performs additional work to make sure I/O is done
in a coherent way.  This is not needed for time retrieval as done by the
time interpolator.  So we can use readq_relaxed instead which will improve
performance.

It affects sparc64 and ia64 only.  Apparently it makes a significant
difference on ia64.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

acpi_video_flags variable is unsigned long, so it should be set as such.
This actually matters on x86-64.
Signed-off-by: NStefan Seyfried <seife@suse.de>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

v9fs has been plagued by an over-complicated approach trying to map Linux
dentry semantics to Plan 9 fid semantics.  Our previous approach called for
aggressive flushing of the dcache resulting in several problems (including
wierd cwd behavior when running /bin/pwd).

This patch dramatically simplifies our handling of this fid management.  Fids
will not be clunked as promptly, but the new approach is more functionally
correct.  We now clunk un-open fids only when their dentry ref_count reaches 0
(and d_delete is called).

Another simplification is we no longer seek to match fids to the process-id or
uid of the action initiator.  The uid-matching will need to be revisited when
we fix the security model.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lucho's atomic create+open fix had a bug in the super block initialization
causing all mounts to fail.  He was freeing an fcall too early.  This patch
fixes that oversight.
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In order to assure atomic create+open v9fs stores the open fid produced by
v9fs_vfs_create in the dentry, from where v9fs_file_open retrieves it and
associates it with the open file.

This patch modifies v9fs to use nameidata.intent.open values to do the atomic
create+open.
Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net>
Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sync up the recent redboot fix with MTD CVS.  It uses the correct swab()
functions.

Cc: John Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I seem to have lost this read_unlock().

While we're there, let's turn that interruptible sleep unto uninterruptible,
so we don't get a busywait if signal_pending().  (Again.  We seem to have a
habit of doing this).
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

returns error invalid level
Signed-off-by: NSteve French <sfrench@us.ibm.com>

not just the posix path feature.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

error to informational unless frame is rejected.
Signed-off-by: NSteve French <sfrench@us.ibm.com>

This patch should fixe a problem with eeh_add_device_late() not being
defined in the ppc64 build process, causing the build to break.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switch from list_head to hlist_head. Make the size of the hash dependent
upon the allocated area, rather than a constant.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

to prevent confusion when a virtual ip is created on the same interface
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The extent map code has long noticed when the on-disk extent information
is corrupt.  However, so far it has only returned an error.  We should
take the filesystem read-only, as it is corrupt.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Orphan dir recovery can deadlock with another process in
ocfs2_delete_inode() in some corner cases. Fix this by tracking recovery
state more closely and allowing it to handle inode wipes which might
deadlock.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

 This patch finishes cleaning up the node manager allocations if it fails
 to initialize.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

    
The 'tick_usec' is USER_HZ period in usec.  do_gettimeofday() should
use kernel HZ value.
    
Here is a patch for MIPS.  It seems m32r, m68k and sparc have same
problem though their HZ and USER_HZ are same for now.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Remove some prototypes from tcp.h for functions which have long been gone.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Remove some #ifdef'd out code which was inadvertantly introduced in our
initial merge.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

 The check to determine which format string is appopriate for u64 and
 friends works in most cases, but UML on x86_64 doesn't define CONFIG_X86_64,
 so it results in screen fulls of compile-time warnings.

 This patch fixes it to handle that case.

 fs/ocfs2/cluster/masklog.h |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Using this patch, Omnikey CardMan 4000 and 4040 devices automatically
get their device nodes created by udev.

Also, we now check for (and handle) failure of pcmcia_register_driver()
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The axnet_cs driver can support the AMB8110 PC Card, so add the id for it.

In the old pcmcia-cs config file, this card is listed with the comment "not
specific enough".  The last entry in the axnet_ids has the same comment.
They are disabled, and for good reason as it was originally identified by
the MANFID, and that is shared with several cards that use both the
pcnet_cs driver and axnet_cs driver.  I tried my AMB8110 with pcnet_cs, and
found that it works fine, and I cannot find a reason for either, except
that the old config file recommended axnet_cs.
Signed-off-by: NJesse Allen <the3dfxdude@gmail.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Don't just use cards with PCMCIA ID 0x0156, 0x0002.  Make sure that the
vendor string is "Intersil" or "INTERSIL"
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

This is needed to distinguish Intersil and non-Intersil cards with
numeric ID 0x0156, 0x0002.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

Add another CF card ID.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>

The second pseudo multi-function device of a PCMCIA card may only be
configured once the first one is initialized. Therefore, delay the
registration of the second device until the first one is initialized.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net

Signed-off-by: NSteve French <sfrench@us.ibm.com>