Otherwise it can only take the values 0/-1 which doesn't seem to
have been intended.

drivers/input/tablet/wacom.h:108:12: error: dubious one-bit signed bitfield
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

USBHID driver only supports relative mode with this tablet so let aiptek
module handle it.
Signed-off-by: NDmitry Guryanov <guryanov@dgap.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This implements suspend and autosuspend support for wacom devices.
It works by using the usb last busy functionality triggered in the
completion callback.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add support for new wacom tablets - Bamboo1, BambooFun, and Cintiq 12WX
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Update credits and version number to 2.3
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Function keys (also called macro keys) code corrected. Using a
lastMacro variable to keep track of key currently pressed. This
ensures proper resetting when dragging the pen in the drawing
area or to another key. Also suppress sending pressure reports
when over the macro key area.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now echo "some value" > /sys/......./somefile is also acceptable.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Now the old tool is remembered, and reset when a new tool is
selected via the sysfs files.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

To get an on - off reporting for proximity, absolute misc reports are
used. The mixture of absolute and relative reports is awkward
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Added warnings to the points where the tablet probe may fail
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Have to use set_bit since some bit values are over 32, and bitwise or
won't work on these. To be safe for the future too, use set_bit for all
input dev capabilities
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Corrections to relative mode, was looking at wrong byte
Signed-off-by: NMark Vytlacil <mrv@wi.rr.com>
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Mouse button defines tested the wrong bits, now fixed
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Calculation of proximity bit and of data valid bits were reversed for
stylus reports.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Small fix that corrects the documentation on the report byte
format produced by the mouse
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When setting up input device use an array to list all the buttons
instead of setting every bit separately.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is no reason to do that, just tell the compiler that
we are dealing with signed values in buffer, that's it.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use maps to convert for strings to internal constants and vice versa
in aiptek's sysfs attribute methods instead of open-coding it. This
results in smaller code that is also easier to maintain.

[Rene: fix a typo - stylys instead of stylus]
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It makes no sense to check for NULL in attribute methods -
we do usb_set_intfdata before creating attributes and once
attributes have been removed we are guaranteed to not be
called.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use attribute group to simplify error handling and reduce code.

[Rene: add missing NULL to properly terminate aiptek_attributes]
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

They are already exported by input core; there is no need to do it twice.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Do not try to export via sysfs associated event device - it does not
work when evdev is a module that is loaded after aiptek; also it pokes
too deply into input core internals.

Userspace should rely on udev to set up permanent device name for
the tablet.
Signed-off-by: NRene van Paassen <rene.vanpaassen@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll
end up with unbuildable configs.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This will allow concentrating all input devices in one place
in {menu|x|q}config.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>