- 22 7月, 2008 24 次提交
-
-
由 Segher Boessenkool 提交于
binutils < 2.18 has a bug that makes it misbehave when taking an ELF file with all segments at load address 0 as input. This happens when running "strip" on vmlinux, because of the AT() magic in this linker script. People using GCC >= 4.2 won't run into this problem, because the "build-id" support will put some data into the "notes" segment (at a non-zero load address). To work around this, we force some data into both the "dummy" segment and the kernel segment, so the dummy segment will get a non-zero load address. It's not enough to always create the "notes" segment, since if nothing gets assigned to it, its load address will be zero. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Tested-By: NMilton Miller <miltonm@bga.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mike Mason 提交于
This patch changes the EEH_MAX_FAILS action from panic to printing an error message. Panicking under under this condition is too harsh. Although performance will be affected and the device may not recover, the system is still running, which at the very least should allow for a more graceful shutdown. The patch also removes the msleep() within a spinlock, which can lead to a deadlock and is not recommended. Signed-off-by: NMike Mason <mmlnx@us.ibm.com> Acked-by: NLinas Vepstas <linasvepstas@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The offb driver already has a collection of hacks to be able to set the palette on various chips. This adds support for r5xx/r6xx radeons. This is needed as offb is the only console solution on these currently and the firmware in some cases sets a really bad color palette. This fixes using some Radeon X16xx on the Powerstation for example. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Maxim Shchetynin 提交于
If correctable error occurs the syndrome code was logged as 0. This patch lets EDAC to log a correct syndrome code to make problem investigation easier. Signed-off-by: NMaxim Shchetynin <maxim@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDoug Thompson <dougthompson@xmission.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mark Nelson 提交于
Introduce a new dma attriblue DMA_ATTR_WEAK_ORDERING to use weak ordering on DMA mappings in the Cell processor. Add the code to the Cell's IOMMU implementation to use this code. Dynamic mappings can be weakly or strongly ordered on an individual basis but the fixed mapping has to be either completely strong or completely weak. This is currently decided by a kernel boot option (pass iommu_fixed=weak for a weakly ordered fixed linear mapping, strongly ordered is the default). Signed-off-by: NMark Nelson <markn@au1.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Torez Smith 提交于
While running on a system with new hardware and a kernel where the cpu_specs[] table does not recognize the new hardware, the identify_cpu() routine will select the default case as it searches through cpu_specs[] in an attempt to match the real PVR. Once the default case is selected, non of the oprofile counters and/or fields have been set up or defined. When identify_cpu() is called once more with the logical PVR, some of the cpu specific fields are replaced with the exception of the oprofile related ones. However, in the case where we have actually taken the default case while searching for the real PVR, we need to tell oprofile that we are now running in compatibility mode so it can pick up the correct counters. We do this by setting the oprofile_cpu_type field to be that taken from the cpu_specs[] for the cpu we are now emulating. This change will detect that we are now altering the real PVR and determine if we also need to update the oprofile_cpu_type field. Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Adrian Bunk 提交于
For C code spaces versus tabs is just a religious issue, but for Makefiles it actually matters. This patch fixes he following errors: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:166: *** missing separator. Stop. /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:171: *** missing separator. Stop. Since this was inside an ifdef DTC_GENPARSER it was not a problem unless someone wanted to regenerate the shipped generated files. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Adrian Bunk 提交于
The real option is above in the same Kconfig file. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Replace ifdef clutter with the PPC_LONG and PPC_LONG_ALIGN macros for readability. No change to the generated code. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Use the new PPC_LONG_ALIGN macro instead of passing an argument to the asm for consistency. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Add a #define for aligning to a long-sized boundary. It would be nice to use sizeof(long) for this, but that requires generating the value with asm-offsets.c, and asm-offsets.c includes asm-compat.h and we descend into some sort of recursive include hell. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
The OF parsing code for PCI addresses isn't always treating properly the address space indication 0b11 (ie. 0x3) as meaning 64 bits memory space. This means that it fails to parse addresses for PCI BARs that have this encoding set by the firmware, which happens on some SLOF versions and breaks offb palette handling on Powerstation. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
-
由 Michael Ellerman 提交于
__WARN() is not defined for all configs, use WARN_ON(1) instead. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Arnd Bergmann 提交于
We need to pass the kernel stack pointer instead of the user space stack pointer in save_stack_trace_tsk(). Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geoff Levand 提交于
Update ps3_defconfig. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Masakazu Mokuno 提交于
Add sub match id for ps3 system bus so that two different system bus devices can be connected to a shared device. Signed-off-by: NMasakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
This is a defconfig from Dave Jones and should be similar (if not identical) to the fedora ppc32 defconfig. The intent is to cover all cache coherent 6xx based chips and platforms as reasonable. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mark Nelson 提交于
Update iommu_alloc() to take the struct dma_attrs and pass them on to tce_build(). This change propagates down to the tce_build functions of all the platforms. Signed-off-by: NMark Nelson <markn@au1.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Christian Krafft 提交于
This patch adds support for the power button on future IBM cell blades. It actually doesn't shut down the machine. Instead it exposes an input device /dev/input/event0 to userspace which sends KEY_POWER if power button has been pressed. haldaemon actually recognizes the button, so a plattform independent acpid replacement should handle it correctly. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Christian Krafft 提交于
This patch adds a config option for the sysreset_hack used for IBM Cell blades. The code is moves from pervasive.c into ras.c and gets it's own init method. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Christian Krafft 提交于
This patch adds a cpufreq governor that takes the number of running spus into account. It's very similar to the ondemand governor, but not as complex. Instead of hacking spu load into the ondemand governor it might be easier to have cpufreq accepting multiple governors per cpu in future. Don't know if this is the right way, but it would keep the governors simple. Signed-off-by: NChristian Krafft <krafft@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Maxim Shchetynin 提交于
DDR2 memory DIMMs on the Axon could be accessed only as one partition when using file system drivers which are using the direct_access() method. This patch enables for such file system drivers to access Axon's DDR2 memory even if it is splitted in several partitions. Signed-off-by: NMaxim Shchetynin <maxim@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Maxim Shchetynin 提交于
Axonram module registers one block device for each DDR2 DIMM found on a system. This means that each DDR2 DIMM becomes its own block device major number. This patch lets axonram module to register the only one block device for all DDR2 DIMMs which also spares kernel resources. Signed-off-by: NMaxim Shchetynin <maxim@de.ibm.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Wolfgang Grandegger 提交于
Since commit 7560fa60 (gpio: <linux/gpio.h> and "no GPIO support here" stubs) drivers can use GPIOs if they're available, but don't require them. This patch actually enables this feature. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 17 7月, 2008 16 次提交
-
-
由 Timur Tabi 提交于
The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some audio related options. In particular, OSS emulation should be enabled, and the old ALSA API should be disabled. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
This reverts commit e3621ee6. This was not the proper fix. As Scott Wood said CONFIG_FS_ENET has nothing to do with the issue. The proper fix is to select PHYLIB for this board.
-
由 Kumar Gala 提交于
Its possible to build the phylib as a module, however this breaks the board code because alloc_mdio_bitbang and mdiobus_register are not available if we build as a module. These are needed by the board code since it implements the low level mdio bitbang ops. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in EP8248E support. Long term we should look at moving the mdio_ops into its own file so it can be built as a module. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Use the TLBSYNC macro defined in ppc_asm.h rather than our own ifdefs. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
This converts the FSL Book-E PTE access and TLB miss handling to match with the recent changes to 44x that introduce support for non-atomic PTE operations in pgtable-ppc32.h and removes write back to the PTE from the TLB miss handlers. In addition, the DSI interrupt code no longer tries to fixup write permission, this is left to generic code, and _PAGE_HWWRITE is gone. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
With arch/ppc gone and all in kernel users of CONFIG_PPC_CPM_NEW_BINDING fixed up we dont have need for the Kconfig option anymore. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING. Also fixed some asm/of_platform.h to linux/of_platform.h (and of_device.h) Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
Mostly having to do with not marking things __iomem. And some failure to use appropriate accessors to read MMIO regs. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
The old code assumed there was only one, but the 8572 actually has 3. Also, our usual id, 0xe0024520, gets resolved to -1 somewhere, and this was preventing the multiple buses from having different ids. So we only keep the low 20 bits, which have the interesting info, anyway. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
The ULI "Super South Bridge" contains ISA bridge to the legacy devices, such as Super IO mouse/keyboard/floppy disk controllers, parallel port, i8259 interrupt controller and so on. i8259 is disabled on the MPC8610HPCD, and other peripherals are not traced out. So we use only RTC. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
- Get rid of uses_fsl_uli_m1575, it does not scale for all cases. Instead, let's explicitly use machine_is() for each fixup. - Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with machine_is(). One step closer to multiplatform kernels. - Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied. - RTC quirk applies to all boards though, so no machine_is() checks. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch fixes RTC on MPC8572DS boards: dummy read helps only when reading at the end of the bridge's memory (i.e. outside of behind the bridge devices' assigned regions). With this change the quirk also makes RTC work on MPC8610HPCD, so it's unlikely that this will break MPC8641HPCN or MPC8544DS boards. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jochen Friedrich 提交于
Signed-off-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch adds few bindings for the new drivers to be submitted through the appropriate maintainers. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-