- 07 2月, 2007 11 次提交
-
-
由 Olof Johansson 提交于
Clean up the ctr_read/write a bit. It's currently defined in the include but only used in one C file each. The only exception is the classic version, so keep that in the include and define in the C file as appropriate. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Remove an unneeded header include from ps3.h. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Allow the PS3 AV settings driver to access the default video mode stored in the OS area. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Add a new routine ps3_get_firmware_version() and use it to output the firmware version to dmesg. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
PS3 interrupt core update: - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt number for an interrupt outlet, which is needed by the PS3 GPU frame buffer device and audio drivers Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Change the PS3 irq allocation routines to take an argument indicating which cpu (processor thread) the interrupt should be serviced on. The current system configuration favors device interrupts that are serviced on cpu0, so that is used as the default. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geert Uytterhoeven 提交于
Handle storage-related repository data: - Add missing implementations of ps3_repository_read_stor_*() repository accessors. - Dump storage properties in debug mode - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to the corresponding SCSI device types) to enum ps3_dev_type Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Geoff Levand 提交于
Various fixes for the PS3 repository code: - Sync signatures of function prototypes and implementations (enum vs. unsigned int) - Correct references to `regions' as `registers': o Correct enum ps3_region_type as enum ps3_reg_type, o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*, o Correct ps3_repository_find_region() as ps3_repository_find_reg(). - Correct function name in pr_debug() call - Minor error condition improvements. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Vitaly Bordug 提交于
This add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx) Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Vitaly Bordug 提交于
This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Neuling 提交于
CPU_FTRS_POWER6X is unused, hence remove it. Signed-off-by Michael Neuling <mikey@neuling.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 26 1月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
It's useful to have access to struct ipic handle that just got created in ipic_init(). For example, if we want to setup an external IRQ with out a device node we need access ipic->irqhost to create the virtual to HW IRQ mapping and to set the IRQ sense. With this we can mimic the old sense array concept that existed in arch/ppc. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 24 1月, 2007 4 次提交
-
-
由 Ishizaki Kou 提交于
This patch adds irq remapping hook. On interrupt mechanism on Beat, when an irq outlet which has an id which is formerly used is created, remapping the irq is required. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Ishizaki Kou 提交于
Struct pci_controller doesn't prepare for the dependent data of each specific bus. This patch adds private member to struct pci_controller. Signed-off-by: NKou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Adrian Bunk 提交于
Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Anton Blanchard 提交于
I often test new versions of glibc by doing: LD_LIBRARY_PATH=/XXX/lib /XXX/lib/ld.so.1 <binary> One test case ended up SEGV'ing. Upon closer inspection ld.so was loaded at 0x8000000 (128MB) with the heap right after it. Since we normally link binaries at 0x10000000 (256MB) we only had about 128MB of space for the heap: 00100000-00103000 r-xp 00100000 00:00 0 [vdso] 08000000-0801e000 r-xp 00000000 00:01 33079 /lib/ld-2.5.so 0802d000-0802f000 rwxp 0001d000 00:01 33079 /lib/ld-2.5.so 0802f000-08050000 rwxp 0802f000 00:00 0 [heap] 0fe91000-0ffd9000 r-xp 00000000 00:01 33082 /lib/libc-2.5.so 0ffd9000-0ffe8000 ---p 00148000 00:01 33082 /lib/libc-2.5.so 0ffe8000-0ffea000 r--p 00147000 00:01 33082 /lib/libc-2.5.so 0ffea000-0ffed000 rwxp 00149000 00:01 33082 /lib/libc-2.5.so 10000000-10004000 r-xp 00000000 00:01 76 /bin/sleep 10013000-10014000 rwxp 00003000 00:01 76 /bin/sleep ffb41000-ffb56000 rw-p ffb41000 00:00 0 [stack] One way to fix this is move ELF_ET_DYN_BASE from 0x08000000 to 0x20000000. This allows 128MB for the binary (hopefully enough for even the most crazy c++ apps), and with our current layout we will grow the heap up and the stack down, allowing potentially gigabytes of heap: 00100000-00103000 r-xp 00100000 00:00 0 [vdso] 0fe8a000-0ffd3000 r-xp 00000000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffd3000-0ffe3000 ---p 00149000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffe3000-0ffea000 r--p 00149000 00:01 3350 /lib/tls/libc-2.3.6.so 0ffea000-0ffee000 rwxp 00150000 00:01 3350 /lib/tls/libc-2.3.6.so 10000000-10004000 r-xp 00000000 00:01 76 /bin/sleep 10013000-10014000 rwxp 00003000 00:01 76 /bin/sleep 20000000-20018000 r-xp 00000000 00:01 3478 /lib/ld-2.3.6.so 20028000-20029000 r--p 00018000 00:01 3478 /lib/ld-2.3.6.so 20029000-2002a000 rwxp 00019000 00:01 3478 /lib/ld-2.3.6.so 2002a000-2004b000 rwxp 2002a000 00:00 0 [heap] ffd67000-ffd7c000 rw-p ffd67000 00:00 0 [stack] Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 1月, 2007 1 次提交
-
-
由 James Bottomley 提交于
The current PDA code, which went in in post 2.6.19 has a flaw in that it doesn't correctly cycle the GDT and %GS segment through the boot PDA, the CPU PDA and finally the per-cpu PDA. The bug generally doesn't show up if the boot CPU id is zero, but everything falls apart for a non zero boot CPU id. The basically kills voyager which is perfectly capable of doing non zero CPU id boots, so voyager currently won't boot without this. The fix is to be careful and actually do the GDT setups correctly. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 1月, 2007 2 次提交
-
-
由 Robert Jennings 提交于
On 64-bit machines, if an atomic counter is explicitly set to a negative value, the atomic_dec_if_positive function will decrement and store the next smallest value in the atomic counter, contrary to its intended operation. The comparison to determine if the decrement will make the result negative was done by the "addic." instruction, which operates on a 64-bit value, namely the zero-extended word loaded from the atomic variable. This patch uses an explicit word compare (cmpwi) and changes the addic. to an addi (also changing "=&r" to "=&b" so that r0 isn't used, and addi doesn't become li). This also fixes a bug for both 32-bit and 64-bit in that previously 0x80000000 was considered positive, since the result after decrementing is positive. Now it is considered negative. Also, I clarify the return value in the comments just to make it clear that the value returned is always the decremented value, even if that value is not stored back to the atomic counter. Signed-off-by: NRobert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Simon Budig 提交于
This trivial change adds some missing enum values to the hid-debug output. Signed-off-by: NSimon Budig <simon@budig.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 20 1月, 2007 1 次提交
-
-
由 Tejun Heo 提交于
libata didn't used to init qc->dma_dir to any specific value on qc initialization and command translation path didn't set qc->dma_dir if the command doesn't need data transfer. This made non-data commands to have random qc->dma_dir. This usually doesn't cause problem because LLDs usually check qc->protocol first and look at qc->dma_dir iff the command needs data transfer but this doesn't hold for all LLDs. It might be worthwhile to rename qc->dma_dir to qc->data_dir as we use the field to tag data direction for both PIO and DMA protocols. This problem has been spotted by James Bottomley. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 1月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
There's a problem, pointed by Meelis Roos <mroos@linux.ee>, that, on ppc32 arch, with some gcc versions (noticed with prerelease 4.1.2 20061115), compilation fails, due the lack of __ucmpdi2 to do the required 64-bit comparision. This patch takes some sugestions made by Andrew Morton <akpm@osdl.org>, Stelian Pop <stelian@popies.net> and Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 15 1月, 2007 1 次提交
-
-
由 Philip Langdale 提交于
During development of SDHC support, it was discovered that the definition for R6 was incorrect. This patch fixes that and patches the drivers that do switch on the response type. Signed-off-by: NPhilip Langdale <philipl@overt.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: Pavel Pisa <ppisa@pikron.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
- 12 1月, 2007 5 次提交
-
-
由 Andrew Morton 提交于
unionfs managed to hit this on s390. Some architectures use __ptr_t in their FD_ZERO implementation. We don't have a __ptr_t. Switch them over to plain old void*. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Chinner 提交于
Revert bd_mount_mutex back to a semaphore so that xfs_freeze -f /mnt/newtest; xfs_freeze -u /mnt/newtest works safely and doesn't produce lockdep warnings. (XFS unlocks the semaphore from a different task, by design. The mutex code warns about this) Signed-off-by: NDave Chinner <dgc@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
NFS: Fix race in nfs_release_page() invalidate_inode_pages2() may find the dirty bit has been set on a page owing to the fact that the page may still be mapped after it was locked. Only after the call to unmap_mapping_range() are we sure that the page can no longer be dirtied. In order to fix this, NFS has hooked the releasepage() method and tries to write the page out between the call to unmap_mapping_range() and the call to remove_mapping(). This, however leads to deadlocks in the page reclaim code, where the page may be locked without holding a reference to the inode or dentry. Fix is to add a new address_space_operation, launder_page(), which will attempt to write out a dirty page without releasing the page lock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Also, the bare SetPageDirty() can skew all sort of accounting leading to other nasties. [akpm@osdl.org: cleanup] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
This adds the profile=kvm boot option, which enables KVM to profile VM exits. Use: "readprofile -m ./System.map | sort -n" to see the resulting output: [...] 18246 serial_out 148.3415 18945 native_flush_tlb 378.9000 23618 serial_in 212.7748 29279 __spin_unlock_irq 622.9574 43447 native_apic_write 2068.9048 52702 enable_8259A_irq 742.2817 54250 vgacon_scroll 89.3740 67394 ide_inb 6126.7273 79514 copy_page_range 98.1654 84868 do_wp_page 86.6000 140266 pit_read 783.6089 151436 ide_outb 25239.3333 152668 native_io_delay 21809.7143 174783 mask_and_ack_8259A 783.7803 362404 native_set_pte_at 36240.4000 1688747 total 0.5009 Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
Fix an oops experienced on the Cell architecture when init-time functions, early_*(), are called at runtime. It alters the call paths to make sure that the callers explicitly say whether the call is being made on behalf of a hotplug even, or happening at boot-time. It has been compile tested on ppc64, ia64, s390, i386 and x86_64. Acked-by: NArnd Bergmann <arndb@de.ibm.com> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Acked-by: NAndy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2007 2 次提交
-
-
由 Andi Kleen 提交于
+m is really correct for a RMW instruction, but some older gccs error out. I finally gave in and ifdefed it. This fixes compilation errors with some compiler version. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Roman Zippel 提交于
Revert previous attempts at messing with the linux banner string and simply use a separate format string for proc. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Acked-by: NOlaf Hering <olaf@aepfle.de> Acked-by: NJean Delvare <khali@linux-fr.org> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 1月, 2007 4 次提交
-
-
由 Adrian Hunter 提交于
Read-while-load enables higher performance read operations. Signed-off-by: NAdrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Kyungmin Park 提交于
OneNAND supports up to 4 writes at one NAND page. Add support of this feature. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Patrick McHardy 提交于
IP_CT_TCP_FLAG_CLOSE_INIT is a flag and should have a value of 0x4 instead of 0x3, which is IP_CT_TCP_FLAG_WINDOW_SCALE | IP_CT_TCP_FLAG_SACK_PERM. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart De Schuymer 提交于
The included patch translates arpt_counters to xt_counters, making userspace arptables compile against recent kernels. Signed-off-by: NBart De Schuymer <bdschuym@pandora.be> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2007 7 次提交
-
-
由 Jaroslav Kysela 提交于
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Heiko Carstens 提交于
There are several places in the futex code where a spin_lock is held and still uaccesses happen. Deadlocks are avoided by increasing the preempt count. The pagefault handler will then not take any locks but will immediately search the fixup tables. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Anton Blanchard 提交于
There were a few issues with the HCALL_STATS code: - PURR cpu feature checks were backwards - We iterated one entry off the end of the hcall_stats array - Remove dead update_hcall_stats() function prototype I noticed one thing while debugging, and that is we call H_ENTER (to set up the MMU hashtable in early init) before we have done the cpu fixups. This means we will execute the PURR SPR reads even on a CPU that isnt capable of it. I wonder if we can move the CPU feature fixups earlier. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Sylvain Munaut 提交于
Using device_initcall makes it happen for every platform that compiles this file in. This is really bad, for obvious reasons. Instead, we use the .init field of the machine description. If the platform needs the hook to do something specific it can provides its own function and call mpc52xx_declare_of_platform_devices from there. If not, the mpc52xx_declare_of_platform_devices function can directly be used as the init hook. Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 David Woodhouse 提交于
When we switched over to the generic BUG mechanism we forgot to change the assembly code which open-codes a WARN_ON() in enter_rtas(), so the bug table got corrupted. This patch provides an EMIT_BUG_ENTRY macro for use in assembly code, and uses it in entry_64.S. Tested with CONFIG_DEBUG_BUGVERBOSE on ppc64 but not without -- I tried to turn it off but it wouldn't go away; I suspect Aunt Tillie probably needed it. This version gets __FILE__ and __LINE__ right in the assembly version -- rather than saying include/asm-powerpc/bug.h line 21 every time which is a little suboptimal. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Atsushi Nemoto 提交于
Pass "irq" to __DO_IRQ_SMTC_HOOK() macro. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
Implement optimized asm version of csum_partial_copy_nocheck, csum_partial_copy_from_user and csum_and_copy_to_user which can do calculate and copy in parallel, based on memcpy.S. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-