We could use the recently added PCI_CLASS_SERIAL_USB_UHCI,
PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in
more places, for slightly shorter and clearer code.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as671) fixes a bug in the error pathway for the net2280
probe routine.  A failure during probe will cause the driver to call
pci_get_drvdata before the corresponding pci_set_drvdata has been set.
The patch also does a kzalloc conversion.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as670) adds a check for whether a shared IRQ was actually
generated by the net2280 device.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as669) fixes a bug in the net2280 driver.  Now it will
properly send zero-length packets on ep0 until the control status stage
occurs.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as668) fixes a typo in net2280.  The handler for 0-length
control-IN requests should check that the endpoint _isn't_ halted before
sending a 0-length packet.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Originally submitted by Olivier Blondeau <zeitoun@gmail.com>, with re-diffing
by me. Adds a new atmel unusual_dev entry.
Signed-off-by: NPhil Dibowitz <phil@ipom.com>

This patch removes the Protocol portion of the Iomega Click! device as it's not
needed. Not-needed message reported by Kenneth Crudup <kenny@panix.com>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add new iTegno usb CDMA 1x card (usbid '0eba:2080') support to pl2303 driver
Signed-off-by: NWang Jun <wangjun1974@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We may return from drivers/usb/serial/whiteheat.c::whiteheat_attach()
without freeing `result' if we leave via the no_firmware: label.

Spotted by the coverity checker as #670
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] pxamci: fix data timeout calculation

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] nommu: trivial fixups for head-nommu.S and the Makefile
  [ARM] vfp: fix leak of VFP_NAN_FLAG into FPSCR
  [ARM] 3484/1: Correct AEABI CFLAGS for correct enum handling

Few of the notifier_chain_register() callers use __init in the definition
of notifier_call.  It is incorrect as the function definition should be
available after the initializations (they do not unregister them during
initializations).

This patch fixes all such usages to _not_ have the notifier_call __init
section.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Few of the notifier_chain_register() callers use __devinitdata in the
definition of notifier_block data structure.  It is incorrect as the
data structure should be available after the initializations (they do
not unregister them during initializations).

This was leading to an oops when notifier_chain_register() call is
invoked for those callback chains after initialization.

This patch fixes all such usages to _not_ have the notifier_block data
structure in the init data section.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch addresses a flaw in LSM, where there is no mediation of readv()
and writev() in for 32-bit compatible apps using a 64-bit kernel.

This bug was discovered and fixed initially in the native readv/writev
code [1], but was not fixed in the compat code.  Thanks to Al for spotting
this one.

  [1] http://lwn.net/Articles/154282/Signed-off-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

All modifications of ->i_flags in inodes that might be visible to
somebody else must be under ->i_mutex.  That patch fixes ext3 ioctl()
setting S_APPEND and friends.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Switched to use of sys_pread64()/sys_pwrite64() rather than keep duplicating
their guts; among the little things that had been missing there were such as
	ret = security_file_permission (file, MAY_READ);
Gotta love the LSM robustness, right?
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sbi->s_group_desc is an array of pointers to buffer_head.  memcpy() of
buffer size from address of buffer_head is a bad idea - it will generate
junk in any case, may oops if buffer_head is close to the end of slab
page and next page is not mapped and isn't what was intended there.
IOW, ->b_data is missing in that call.  Fortunately, result doesn't go
into the primary on-disk data structures, so only backup ones get crap
written to them; that had allowed this bug to remain unnoticed until
now.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] splice: add ->splice_write support for /dev/null
  [PATCH] splice: rearrange moving to/from pipe helpers
  [PATCH] Add support for the sys_vmsplice syscall
  [PATCH] splice: fix offset problems
  [PATCH] splice: fix min() warning

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] forcedeth: fix initialization
  [PATCH] sky2: version 1.2
  [PATCH] sky2: reset function can be devinit
  [PATCH] sky2: use ALIGN() macro
  [PATCH] sky2: add fake idle irq timer
  [PATCH] sky2: reschedule if irq still pending
  [PATCH] bcm43xx: make PIO mode usable
  [PATCH] bcm43xx: add to MAINTAINERS
  [PATCH] softmac: fix SIOCSIWAP
  [PATCH] Fix crash on big-endian systems during scan
  e1000: Update truesize with the length of the packet for packet split
  [PATCH] Fix locking in gianfar

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BRIDGE]: allow full size vlan packets

Useful for testing.
Signed-off-by: NJens Axboe <axboe@suse.de>

We need these for people writing their own ->splice_read/write hooks.
Signed-off-by: NJens Axboe <axboe@suse.de>

This patch fixes the nic initialization. If the nic was in low power
mode, it brings it back to normal power. Also, it utilizes a new
hardware reset during the init.

I am resending based on feedback, I corrected the register size mapping
and delay after posted write.
Signed-Off-By: NAyaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Update to version 1.2
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The sky2_reset function only called from sky2_probe.
Maybe the compiler was smart enough to figure this out already.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The ALIGN() macro in kernel.h does the same math that the
sky2 driver was using for padding.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add an fake NAPI schedule once a second. This is an attempt to work around
for broken configurations with edge-triggered interrupts.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This is a workaround for the case edge-triggered irq's. Several users
seem to have broken configurations sharing edge-triggered irq's. To avoid
losing IRQ's, reshedule if more work arrives.

The changes to netdevice.h are to extract the part that puts device
back in list into separate inline.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Need to allow for VLAN header when bridging.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sys_splice() moves data to/from pipes with a file input/output. sys_vmsplice()
moves data to a pipe, with the input being a user address range instead.

This uses an approach suggested by Linus, where we can hold partial ranges
inside the pages[] map. Hopefully this will be useful for network
receive support as well.
Signed-off-by: NJens Axboe <axboe@suse.de>

Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>

BKL does not protect against races if the task may sleep between
checking and setting a value.  So move checking of file->private_data
near to setting it in fuse_fill_super().

Found by Al Viro.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>

A deadlock was possible, when the last reference to the superblock was
held due to a background request containing a file reference.

Releasing the file would release the vfsmount which in turn would
release the superblock.  Since sbput_sem is held during the fput() and
fuse_put_super() tries to acquire this same semaphore, a deadlock
results.

The solution is to move the fput() outside the region protected by
sbput_sem.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>

This reverts 73ce8355 commit.

It was wrong, because it didn't take into account the requirement,
that iput() for background requests must be performed synchronously
with ->put_super(), otherwise active inodes may remain after unmount.

The right solution is to keep the sbput_sem and perform iput() within
the locked region, but move fput() outside sbput_sem.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>