In order to protect them against file removal issues, debugfs_create_file()
creates a lifetime managing proxy around each struct file_operations
handed in.

In cases where this struct file_operations is able to manage file lifetime
by itself already, the proxy created by debugfs is a waste of resources.

The most common class of struct file_operations given to debugfs are those
defined by means of the DEFINE_SIMPLE_ATTRIBUTE() macro.

Introduce a DEFINE_DEBUGFS_ATTRIBUTE() macro to allow any
struct file_operations of this class to be easily made file lifetime aware
and thus, to be operated unproxied.

Specifically, introduce debugfs_attr_read() and debugfs_attr_write()
which wrap simple_attr_read() and simple_attr_write() under the protection
of a debugfs_use_file_start()/debugfs_use_file_finish() pair.

Make DEFINE_DEBUGFS_ATTRIBUTE() set the defined struct file_operations'
->read() and ->write() members to these wrappers.

Export debugfs_create_file_unsafe() in order to allow debugfs users to
create their files in non-proxying operation mode.
Signed-off-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Upon return of debugfs_remove()/debugfs_remove_recursive(), it might
still be attempted to access associated private file data through
previously opened struct file objects. If that data has been freed by
the caller of debugfs_remove*() in the meanwhile, the reading/writing
process would either encounter a fault or, if the memory address in
question has been reassigned again, unrelated data structures could get
overwritten.

However, since debugfs files are seldomly removed, usually from module
exit handlers only, the impact is very low.

Currently, there are ~1000 call sites of debugfs_create_file() spread
throughout the whole tree and touching all of those struct file_operations
in order to make them file removal aware by means of checking the result of
debugfs_use_file_start() from within their methods is unfeasible.

Instead, wrap the struct file_operations by a lifetime managing proxy at
file open:
- In debugfs_create_file(), the original fops handed in has got stashed
  away in ->d_fsdata already.
- In debugfs_create_file(), install a proxy file_operations factory,
  debugfs_full_proxy_file_operations, at ->i_fop.

This proxy factory has got an ->open() method only. It carries out some
lifetime checks and if successful, dynamically allocates and sets up a new
struct file_operations proxy at ->f_op. Afterwards, it forwards to the
->open() of the original struct file_operations in ->d_fsdata, if any.

The dynamically set up proxy at ->f_op has got a lifetime managing wrapper
set for each of the methods defined in the original struct file_operations
in ->d_fsdata.

Its ->release()er frees the proxy again and forwards to the original
->release(), if any.

In order not to mislead the VFS layer, it is strictly necessary to leave
those fields blank in the proxy that have been NULL in the original
struct file_operations also, i.e. aren't supported. This is why there is a
need for dynamically allocated proxies. The choice made not to allocate a
proxy instance for every dentry at file creation, but for every
struct file object instantiated thereof is justified by the expected usage
pattern of debugfs, namely that in general very few files get opened more
than once at a time.

The wrapper methods set in the struct file_operations implement lifetime
managing by means of the SRCU protection facilities already in place for
debugfs:
They set up a SRCU read side critical section and check whether the dentry
is still alive by means of debugfs_use_file_start(). If so, they forward
the call to the original struct file_operation stored in ->d_fsdata, still
under the protection of the SRCU read side critical section.
This SRCU read side critical section prevents any pending debugfs_remove()
and friends to return to their callers. Since a file's private data must
only be freed after the return of debugfs_remove(), the ongoing proxied
call is guarded against any file removal race.

If, on the other hand, the initial call to debugfs_use_file_start() detects
that the dentry is dead, the wrapper simply returns -EIO and does not
forward the call. Note that the ->poll() wrapper is special in that its
signature does not allow for the return of arbitrary -EXXX values and thus,
POLLHUP is returned here.

In order not to pollute debugfs with wrapper definitions that aren't ever
needed, I chose not to define a wrapper for every struct file_operations
method possible. Instead, a wrapper is defined only for the subset of
methods which are actually set by any debugfs users.
Currently, these are:

  ->llseek()
  ->read()
  ->write()
  ->unlocked_ioctl()
  ->poll()

The ->release() wrapper is special in that it does not protect the original
->release() in any way from dead files in order not to leak resources.
Thus, any ->release() handed to debugfs must implement file lifetime
management manually, if needed.
For only 33 out of a total of 434 releasers handed in to debugfs, it could
not be verified immediately whether they access data structures that might
have been freed upon a debugfs_remove() return in the meanwhile.

Export debugfs_use_file_start() and debugfs_use_file_finish() in order to
allow any ->release() to manually implement file lifetime management.

For a set of common cases of struct file_operations implemented by the
debugfs_core itself, future patches will incorporate file lifetime
management directly within those in order to allow for their unproxied
operation. Rename the original, non-proxying "debugfs_create_file()" to
"debugfs_create_file_unsafe()" and keep it for future internal use by
debugfs itself. Factor out code common to both into the new
__debugfs_create_file().
Signed-off-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nothing prevents a dentry found by path lookup before a return of
__debugfs_remove() to actually get opened after that return. Now, after
the return of __debugfs_remove(), there are no guarantees whatsoever
regarding the memory the corresponding inode's file_operations object
had been kept in.

Since __debugfs_remove() is seldomly invoked, usually from module exit
handlers only, the race is hard to trigger and the impact is very low.

A discussion of the problem outlined above as well as a suggested
solution can be found in the (sub-)thread rooted at

  http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk
  ("Yet another pipe related oops.")

Basically, Greg KH suggests to introduce an intermediate fops and
Al Viro points out that a pointer to the original ones may be stored in
->d_fsdata.

Follow this line of reasoning:
- Add SRCU as a reverse dependency of DEBUG_FS.
- Introduce a srcu_struct object for the debugfs subsystem.
- In debugfs_create_file(), store a pointer to the original
  file_operations object in ->d_fsdata.
- Make debugfs_remove() and debugfs_remove_recursive() wait for a
  SRCU grace period after the dentry has been delete()'d and before they
  return to their callers.
- Introduce an intermediate file_operations object named
  "debugfs_open_proxy_file_operations". It's ->open() functions checks,
  under the protection of a SRCU read lock, whether the dentry is still
  alive, i.e. has not been d_delete()'d and if so, tries to acquire a
  reference on the owning module.
  On success, it sets the file object's ->f_op to the original
  file_operations and forwards the ongoing open() call to the original
  ->open().
- For clarity, rename the former debugfs_file_operations to
  debugfs_noop_file_operations -- they are in no way canonical.

The choice of SRCU over "normal" RCU is justified by the fact, that the
former may also be used to protect ->i_private data from going away
during the execution of a file's readers and writers which may (and do)
sleep.

Finally, introduce the fs/debugfs/internal.h header containing some
declarations internal to the debugfs implementation.
Signed-off-by: NNicolai Stange <nicstange@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Directory inodes should start off with i_nlink == 2 (one extra ref
for "." entry).  debugfs_create_automount() increases neither the
i_nlink reference for current inode nor for parent inode.

On attempt to remove the automount dentry, kernel complains:

  [   86.288070] WARNING: CPU: 1 PID: 3616 at fs/inode.c:273 drop_nlink+0x3e/0x50()
  [   86.288461] Modules linked in: debugfs_example2(O-)
  [   86.288745] CPU: 1 PID: 3616 Comm: rmmod Tainted: G           O    4.4.0-rc3-next-20151207+ #135
  [   86.289197] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150617_082717-anatol 04/01/2014
  [   86.289696]  ffffffff81be05c9 ffff8800b9e6fda0 ffffffff81352e2c 0000000000000000
  [   86.290110]  ffff8800b9e6fdd8 ffffffff81065142 ffff8801399175e8 ffff8800bb78b240
  [   86.290507]  ffff8801399175e8 ffff8800b73d7898 ffff8800b73d7840 ffff8800b9e6fde8
  [   86.290933] Call Trace:
  [   86.291080]  [<ffffffff81352e2c>] dump_stack+0x4e/0x82
  [   86.291340]  [<ffffffff81065142>] warn_slowpath_common+0x82/0xc0
  [   86.291640]  [<ffffffff8106523a>] warn_slowpath_null+0x1a/0x20
  [   86.291932]  [<ffffffff811ae62e>] drop_nlink+0x3e/0x50
  [   86.292208]  [<ffffffff811ba35b>] simple_unlink+0x4b/0x60
  [   86.292481]  [<ffffffff811ba3a7>] simple_rmdir+0x37/0x50
  [   86.292748]  [<ffffffff812d9808>] __debugfs_remove.part.16+0xa8/0xd0
  [   86.293082]  [<ffffffff812d9a0b>] debugfs_remove_recursive+0xdb/0x1c0
  [   86.293406]  [<ffffffffa00004dd>] cleanup_module+0x2d/0x3b [debugfs_example2]
  [   86.293762]  [<ffffffff810d959b>] SyS_delete_module+0x16b/0x220
  [   86.294077]  [<ffffffff818ef857>] entry_SYSCALL_64_fastpath+0x12/0x6a
  [   86.294405] ---[ end trace c9fc53353fe14a36 ]---
  [   86.294639] ------------[ cut here ]------------

To reproduce the issue it is enough to invoke these lines:

     autom = debugfs_create_automount("automount", NULL, vfsmount_cb, data);
     BUG_ON(IS_ERR_OR_NULL(autom));
     debugfs_remove(autom);

The issue is fixed by increasing inode i_nlink references for current
and parent inodes.
Signed-off-by: NRoman Pen <r.peniaev@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In debugfs' start_creating(), we pin the file system to safely access
its root. When we failed to create a file, we unpin the file system via
failed_creating() to release the mount count and eventually the reference
of the vfsmount.

However, when we run into an error during lookup_one_len() when still
in start_creating(), we only release the parent's mutex but not so the
reference on the mount. Looks like it was done in the past, but after
splitting portions of __create_file() into start_creating() and
end_creating() via 190afd81 ("debugfs: split the beginning and the
end of __create_file() off"), this seemed missed. Noticed during code
review.

Fixes: 190afd81 ("debugfs: split the beginning and the end of __create_file() off")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

According to commit a59d6293 ("debugfs: change parameter check in
debugfs_remove() functions"), this is meant to make cleanup easier for
callers. In that case it ought to be documented.
Signed-off-by: NUlf Magnusson <ulfalizer@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

According to commit a59d6293 ("debugfs: change parameter check in
debugfs_remove() functions"), this is meant to make cleanup easier for
callers. In that case it ought to be documented.
Signed-off-by: NUlf Magnusson <ulfalizer@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This allows for better documentation in the code and
it allows for a simpler and fully correct version of
fs_fully_visible to be written.

The mount points converted and their filesystems are:
/sys/hypervisor/s390/       s390_hypfs
/sys/kernel/config/         configfs
/sys/kernel/debug/          debugfs
/sys/firmware/efi/efivars/  efivarfs
/sys/fs/fuse/connections/   fusectl
/sys/fs/pstore/             pstore
/sys/kernel/tracing/        tracefs
/sys/fs/cgroup/             cgroup
/sys/kernel/security/       securityfs
/sys/fs/selinux/            selinuxfs
/sys/fs/smackfs/            smackfs

Cc: stable@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fix up debugfs to use d_is_dir(dentry) in place of
S_ISDIR(dentry->d_inode->i_mode).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If something went wrong with creating a debugfs file/symlink/directory,
that value could be passed down into debugfs again as a parent dentry.
To make caller code simpler, just error out if this happens, and don't
crash the kernel.
Reported-by: NAlex Elder <elder@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NAlex Elder <elder@linaro.org>

As it is, we have debugfs_remove() racing with symlink traversals.
Supply ->evict_inode() and do freeing there - inode will remain
pinned until we are done with the symlink body.

And rip the idiocy with checking if dentry is positive right after
we'd verified debugfs_positive(), which is a stronger check...

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Convert the following where appropriate:

 (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

 (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

 (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry).  This is actually more
     complicated than it appears as some calls should be converted to
     d_can_lookup() instead.  The difference is whether the directory in
     question is a real dir with a ->lookup op or whether it's a fake dir with
     a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer.  In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE.  Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
    die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
    print "No matches\n";
    exit(0);
}

my @cocci = (
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISLNK(E->d_inode->i_mode)',
    '+ d_is_symlink(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISDIR(E->d_inode->i_mode)',
    '+ d_is_dir(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISREG(E->d_inode->i_mode)',
    '+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
    chomp $file;
    print "Processing ", $file, "\n";
    system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
	die "spatch failed";
}

[AV: overlayfs parts skipped]
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Provide a file creation function that also takes an initial size so that the
caller doesn't have to set i_size, thus meaning that we don't have to call
deal with ->d_inode in the callers.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Provide a file creation function that also takes an initial size so that the
caller doesn't have to set i_size, thus meaning that we don't have to call
deal with ->d_inode in the callers.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and don't bother with dput(dentry) in the former and with
dget(dentry) preceding all its calls.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and trim the arguments list
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

dev is always zero, dir was only used to get its ->i_sb, which is
equal to ->d_sb of dentry...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fixes checkpatch.pl trailing whitespace errors
Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ I'm currently running my tests on it now, and so far, after a few
 hours it has yet to blow up. I'll run it for 24 hours which it never
 succeeded in the past. ]

The tracing code has a way to make directories within the debugfs file
system as well as deleting them using mkdir/rmdir in the instance
directory. This is very limited in functionality, such as there is
no renames, and the parent directory "instance" can not be modified.
The tracing code creates the instance directory from the debugfs code
and then replaces the dentry->d_inode->i_op with its own to allow
for mkdir/rmdir to work.

When these are called, the d_entry and inode locks need to be released
to call the instance creation and deletion code. That code has its own
accounting and locking to serialize everything to prevent multiple
users from causing harm. As the parent "instance" directory can not
be modified this simplifies things.

I created a stress test that creates several threads that randomly
creates and deletes directories thousands of times a second. The code
stood up to this test and I submitted it a while ago.

Recently I added a new test that adds readers to the mix. While the
instance directories were being added and deleted, readers would read
from these directories and even enable tracing within them. This test
was able to trigger a bug:

 general protection fault: 0000 [#1] PREEMPT SMP
 Modules linked in: ...
 CPU: 3 PID: 17789 Comm: rmdir Tainted: G        W     3.15.0-rc2-test+ #41
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000
 RIP: 0010:[<ffffffff811ed5eb>]  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
 RSP: 0018:ffff880077019df8  EFLAGS: 00010246
 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000
 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454
 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000
 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640
 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7
 FS:  00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0
 Stack:
  ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640
  0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000
  00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28
 Call Trace:
  [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de
  [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3
  [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139
  [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
  [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b
 Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08
 RIP  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
  RSP <ffff880077019df8>

It took a while, but every time it triggered, it was always in the
same place:

	list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {

Where the child->d_u.d_child seemed to be corrupted.  I added lots of
trace_printk()s to see what was wrong, and sure enough, it was always
the child's d_u.d_child field. I looked around to see what touches
it and noticed that in __dentry_kill() which calls dentry_free():

static void dentry_free(struct dentry *dentry)
{
	/* if dentry was never visible to RCU, immediate free is OK */
	if (!(dentry->d_flags & DCACHE_RCUACCESS))
		__d_free(&dentry->d_u.d_rcu);
	else
		call_rcu(&dentry->d_u.d_rcu, __d_free);
}

I also noticed that __dentry_kill() unlinks the child->d_u.child
under the parent->d_lock spin_lock.

Looking back at the loop in debugfs_remove_recursive() it never takes the
parent->d_lock to do the list walk. Adding more tracing, I was able to
prove this was the issue:

 ftrace-t-15385   1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600
    rmdir-15409   2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058

The dentry_kill freed ffff88006d573600 just as the remove recursive was walking
it.

In order to fix this, the list walk needs to be modified a bit to take
the parent->d_lock. The safe version is no longer necessary, as every
time we remove a child, the parent->d_lock must be released and the
list walk must start over. Each time a child is removed, even though it
may still be on the list, it should be skipped by the first check
in the loop:

		if (!debugfs_positive(child))
			continue;

Cc: stable@vger.kernel.org
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org

This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Change debugfs_remove_recursive() to use list_next_entry(child), no
changes in generated code.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

debugfs_remove_recursive() is wrong,

1. it wrongly assumes that !list_empty(d_subdirs) means that this
   dir should be removed.

   This is not that bad by itself, but:

2. if d_subdirs does not becomes empty after __debugfs_remove()
   it gives up and silently fails, it doesn't even try to remove
   other entries.

   However ->d_subdirs can be non-empty because it still has the
   already deleted !debugfs_positive() entries.

3. simple_release_fs() is called even if __debugfs_remove() fails.

Suppose we have

	dir1/
		dir2/
			file2
		file1

and someone opens dir1/dir2/file2.

Now, debugfs_remove_recursive(dir1/dir2) succeeds, and dir1/dir2 goes
away.

But debugfs_remove_recursive(dir1) silently fails and doesn't remove
this directory. Because it tries to delete (the already deleted)
dir1/dir2/file2 again and then fails due to "Avoid infinite loop"
logic.

Test-case:

	#!/bin/sh

	cd /sys/kernel/debug/tracing
	echo 'p:probe/sigprocmask sigprocmask' >> kprobe_events
	sleep 1000 < events/probe/sigprocmask/id &
	echo -n >| kprobe_events

	[ -d events/probe ] && echo "ERR!! failed to rm probe"

And after that it is not possible to create another probe entry.

With this patch debugfs_remove_recursive() skips !debugfs_positive()
files although this is not strictly needed. The most important change
is that it does not try to make ->d_subdirs empty, it simply scans
the whole list(s) recursively and removes as much as possible.

Link: http://lkml.kernel.org/r/20130726151256.GC19472@redhat.comAcked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Acked-by: NKees Cook <keescook@chromium.org>
Reported-by: NKees Cook <keescook@google.com>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>

We already initialize it to NULL when declaring it, no need to do
that twice.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch technically breaks userspace, but I suspect that anyone who
actually used this flag would have encountered this brokenness, declared
it lunacy, and already sent a patch.
Signed-off-by: NDave Reisner <dreisner@archlinux.org>
Reviewed-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>