- 03 3月, 2013 40 次提交
-
-
由 James Hogan 提交于
metag/allmodconfig: drivers/media/v4l2-core/videobuf2-dma-contig.c: In function 'vb2_dc_get_base_sgt': drivers/media/v4l2-core/videobuf2-dma-contig.c:387: error: implicit declaration of function 'dma_get_sgtable' For architectures using dma_map_ops, dma_get_sgtable() is provided in <asm-generic/dma-mapping-common.h>. Metag does not use dma_map_ops yet, hence it should implement it as an inline stub using dma_common_get_sgtable(). Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
-
由 James Hogan 提交于
Metag doesn't have a metag_dt_memblock_reserve() function so remove the declaration from asm/prom.h. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Make a copy of the device tree blob in non-init memory. It is required when using built-in device tree files that the platform code copies the blob to non-init memory prior to calling unflatten_device_tree(), otherwise the strings that the device tree refer to will get poisoned and potentially reused, breaking later reading of the device tree post-init (such as compatible matching in modules, debugfs, and the procfs interface). Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Reviewed-by: NVineet Gupta <vgupta@synopsys.com>
-
由 James Hogan 提交于
Minimise metag_ksyms.c includes to directly include the <asm/*.h> files that declare a particular symbol, and not include any unnecessary ones. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in mm/init.c into mm/init.c. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in usercopy.c into usercopy.c Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in setup.c into setup.c Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in kick.c into kick.c Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
It's less error prone to have function symbols exported immediately after the function rather than in metag_ksyms.c. Move each EXPORT_SYMBOL in metag_ksyms.c for symbols defined in traps.c into traps.c Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
The SMP version of arch_local_irq_enable() uses preempt_disable(), but <asm/irqflags.h> doesn't include <linux/preempt.h> causing the following errors on SMP when pstore/ftrace is enabled (caught by buildbot smp allyesconfig): In file included from include/linux/irqflags.h:15, from fs/pstore/ftrace.c:16: arch/metag/include/asm/irqflags.h: In function 'arch_local_irq_enable': arch/metag/include/asm/irqflags.h:84: error: implicit declaration of function 'preempt_disable' arch/metag/include/asm/irqflags.h:86: error: implicit declaration of function 'preempt_enable_no_resched' However <linux/preempt.h> cannot be easily included from <asm/irqflags.h> as it can cause circular include dependencies in the !SMP case, and potentially in the SMP case in the future. Therefore move the SMP implementation of arch_local_irq_enable() into traps.c and use an inline version of get_trigger_mask() which is also defined in traps.c for SMP. This adds an extra layer of function call / stack push when preempt_disable needs to call other functions, however in the non-preemptive SMP case it should be about as fast, as it was already calling the get_trigger_mask() function which is now used inline. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Meta uses symbol prefixes, so add "metag" to the list of architectures to set the mod_prefix to "_" for. This fixes __crc_* symbols to add the extra underscore to match _CRC_SYMBOL macro in <linux/export.h> and so that modpost finds them. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Convert hugetlb_get_unmapped_area_new_pmd() to use vm_unmapped_area() rather than searching the virtual address space itself. This fixes the following errors in linux-next due to the specified members being removed after other architectures have already been converted: arch/metag/mm/hugetlbpage.c: In function 'hugetlb_get_unmapped_area_new_pmd': arch/metag/mm/hugetlbpage.c:199: error: 'struct mm_struct' has no member named 'cached_hole_size' arch/metag/mm/hugetlbpage.c:200: error: 'struct mm_struct' has no member named 'free_area_cache' arch/metag/mm/hugetlbpage.c:215: error: 'struct mm_struct' has no member named 'cached_hole_size' Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: NMichel Lespinasse <walken@google.com>
-
由 James Hogan 提交于
Various file systems use clear_page() and copy_page(), so when they're built as modules we get build errors like the following: ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined! Therefore export these functions to modules from metag_ksyms.c to fix the errors. This was hit by a randconfig build. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Various file systems indirectly use metag_code_cache_flush_all(), so when they're built as modules we get build errors like the following: ERROR: "metag_code_cache_flush_all" [fs/xfs/xfs.ko] undefined! Therefore export this function to modules to fix the errors. This was hit by a randconfig build. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Rename setup_txprivext() to setup_priv() and add initialisation of some more per-thread privilege protection registers: - TxPRIVSYSR: 0x04400000-0x047fffff 0x05000000-0x07ffffff 0x84000000-0x87ffffff - TxPIOREG: 0x02000000-0x02ffffff 0x04800000-0x048fffff - TxSYREG: 0x04000000-0x04000fff (except write fetch system event) Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Define PRIV_BITS using explicit constants from <asm/metag_regs.h> rather than with a hard coded value. This also adds a couple of missing definitions for the TXPRIVEXT priv bits for protecting writes to TXTIMER and the trace registers. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Sort includes in kernel/setup.c. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Define rmb(), cpu_relax(), and CPUINFO_PROC for Meta so that the perf tools can be built for Meta. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 James Hogan 提交于
Add boot time check for whether LNKGET/LNKSET go through or around the cache. Depending on the configuration an info message (no harm), warning (technically wrong but no harm), or big WARN (expect failure in either kernel or userland) may be emitted if the behaviour is not as expected: Configuration Hardware Response ------------------------------------------ -------- -------- AROUND_CACHE through pr_info !AROUND_CACHE && ATOMICITY_LNKGET around WARN (kernel) " && !ATOMICITY_LNKGET && SMP around WARN (user) " " && !SMP around pr_warn Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
metag_cache_probe() is only called from setup_arch(), so add the __init attribute to it. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add basic JTAG Debug Adapter (DA) support so that drivers which communicate with the DA can detect whether one is actually present (otherwise the target will halt indefinitely). This allows the metag_da TTY driver and imgdafs filesystem driver to be built, updates defconfigs, and sets up the metag_da console early if it's configured in. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Adapt checkstack.pl so that it works for metag. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add ftrace support for metag. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 James Hogan 提交于
Add Perf support for metag. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
由 James Hogan 提交于
Add metag build infrastructure. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add [!]METAG to a couple of Kconfig dependencies in lib/Kconfig.debug. Don't allow stack utilization instrumentation on metag, and allow building with frame pointers. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paul.mckenney@linaro.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Michel Lespinasse <walken@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com>
-
由 James Hogan 提交于
Commit cc2383ec ("mm: introduce arch-specific vma flag VM_ARCH_1") merged in v3.7-rc1. The above commit combined several arch-specific vma flags into one, and in the process it changed the VM_GROWSUP definition to depend on specific architectures rather than CONFIG_STACK_GROWSUP. Therefore add an ifdef for CONFIG_METAG to also set VM_GROWSUP. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Michel Lespinasse <walken@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-mm@kvack.org
-
由 James Hogan 提交于
Add the remaining metag header files: - byteorder.h, swab.h (byte order and swapping) - barrier.h, cpu.h. hwthread.h, processor.h (hardware thread related) - bug.h, elf.h, gpio.h, linkage.h, resource.h (other) Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add stack unwinding support for metag. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add optimised library functions for metag. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add DMA mapping code. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add SMP support for metag. This allows Linux to take control of multiple hardware threads on a single Meta core, treating them as separate Linux CPUs. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add basic metag documentation. This includes an outline description of the ABIs (including syscall ABI) and calling conventions, similar to the one in Documentation/frv/. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Rob Landley <rob@landley.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: linux-doc@vger.kernel.org
-
由 James Hogan 提交于
Add header files to implement Meta hardware thread locks (used by some other atomic operations), atomics, spinlocks, and bitops. There are 2 main types of atomic primitives for metag (in addition to IRQs off on UP): - LOCK instructions provide locking between hardware threads. - LNKGET/LNKSET instructions provide load-linked/store-conditional operations allowing for lighter weight atomics on Meta2 LOCK instructions allow for hardware threads to acquire voluntary or exclusive hardware thread locks: - LOCK0 releases exclusive and voluntary lock from the running hardware thread. - LOCK1 acquires the voluntary hardware lock, blocking until it becomes available. - LOCK2 implies LOCK1, and additionally acquires the exclusive hardware lock, blocking all other hardware threads from executing. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add metag system call and gateway page interfaces. The metag architecture port uses the generic system call numbers from asm-generic/unistd.h, as well as a user gateway page mapped at 0x6ffff000 which contains fast atomic primitives (depending on SMP) and a fast method of accessing TLS data. System calls use the SWITCH instruction with the immediate 0x440001 to signal a system call. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Meta core internal interrupts (from HWSTATMETA and friends) are vectored onto the TR1 core trigger for the current thread. This is demultiplexed in irq-metag.c to individual Linux IRQs for each internal interrupt. External SoC interrupts (from HWSTATEXT and friends) are vectored onto the TR2 core trigger for the current thread. This is demultiplexed in irq-metag-ext.c to individual Linux IRQs for each external SoC interrupt. The external irqchip has devicetree bindings for configuring the number of irq banks and the type of masking available. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Dom Cobley <popcornmix@gmail.com> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org
-
由 James Hogan 提交于
Add core IRQ handling for metag. The code in irq.c exposes the TBX signal numbers as Linux IRQs. Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
-
由 James Hogan 提交于
Add trap code for metag. At the lowest level Meta traps (and return from interrupt instruction - RTI) simply swap the PC and PCX registers and optionally toggle the interrupt status bit (ISTAT). Low level TBX code in tbipcx.S handles the core context save, determine the TBX signal number based on the core trigger that fired (using the TXSTATI status register), and call TBX signal handlers (mostly in traps.c) via a vector table. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Al Viro <viro@zeniv.linux.org.uk>
-