RDTSCP is already synchronous and doesn't need an explicit CPUID.
This is a little faster and more importantly avoids VMEXITs on Hypervisors.

Original patch from Joerg Roedel, but reworked by AK
Also includes miscompilation fix by Eric Biederman

Cc: "Joerg Roedel" <joerg.roedel@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Following x86-64
Signed-off-by: NAndi Kleen <ak@suse.de>

Syncs up with x86-64.
Signed-off-by: NAndi Kleen <ak@suse.de>

Ported from x86-64.
Signed-off-by: NAndi Kleen <ak@suse.de>

Redefine cpu_has() to evaluate cpu features already checked in early
boot at compile time.  This way the compiler might eliminate some dead code.
Signed-off-by: NAndi Kleen <ak@suse.de>

Check some CPUID bits that are needed for compiler generated early in boot.
When the system is still in real mode before changing the VESA BIOS mode
it is possible to still display an visible error message on the screen.

Similar to x86-64.

Includes cleanups from Eric Biederman
Signed-off-by: NAndi Kleen <ak@suse.de>

Needed for followon patch
Signed-off-by: NAndi Kleen <ak@suse.de>

Follows i386 and useful cleanup.
Signed-off-by: NAndi Kleen <ak@suse.de>

Dead to magic numbers!

Generated code is the same.
Signed-off-by: NAndi Kleen <ak@suse.de>

- Use 64bit TSC calculations to avoid handling overflow
- Use 32bit unsigned arithmetic for the APIC timer. This
way overflows are handled correctly.
- Fix exit check of loop to account for apic timer counting down

Signed-off-by: dpreed@reed.com
Signed-off-by: NAndi Kleen <ak@suse.de>

The kernel doesn't implement it, but some programs like java use it
anyways. Shut the code up.
Signed-off-by: NAndi Kleen <ak@suse.de>

Define a new IGNORE_IOCTL() to let a compat ioctl not be warned about even when
it is not implemented.

This is the same as COMPATIBLE_IOCTL internally, but better self documentng.

Valid reasons to use this:
- It is implemented with ->compat_ioctl on some device, but programs
  call it on others too.
- The ioctl is not implemented in the native kernel, but programs
  call it commonly anyways.
Most other reasons are not valid.
Signed-off-by: NAndi Kleen <ak@suse.de>

This mainly removes a lot of code, replacing it with calls into the new 32bit
perfctr-watchdog.c
Signed-off-by: NAndi Kleen <ak@suse.de>

- Introduce a wd_ops structure
- Convert the various nmi watchdogs over to it
- This allows to split the perfctr reservation from the watchdog
setup cleanly.
- Do perfctr reservation globally as it should have always been
- Remove dead code referenced only by unused EXPORT_SYMBOLs
Signed-off-by: NAndi Kleen <ak@suse.de>

Set the node_possible_map at runtime on x86_64.  On a non NUMA system,
num_possible_nodes() will now say '1'.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>

Background:
 We've found that MCEs (specifically DRAM SBEs) tend to come in bunches,
 especially when we are trying really hard to stress the system out.  The
 current MCE poller uses a static interval which does not care whether it
 has or has not found MCEs recently.

Description:
 This patch makes the MCE poller adjust the polling interval dynamically.
 If we find an MCE, poll 2x faster (down to 10 ms).  When we stop finding
 MCEs, poll 2x slower (up to check_interval seconds).  The check_interval
 tunable becomes the max polling interval.  The "Machine check events
 logged" printk() is rate limited to the check_interval, which should be
 identical behavior to the old functionality.

Result:
 If you start to take a lot of correctable errors (not exceptions), you
 log them faster and more accurately (less chance of overflowing the MCA
 registers).  If you don't take a lot of errors, you will see no change.

Alternatives:
 I considered simply reducing the polling interval to 10 ms immediately
 and keeping it there as long as we continue to find errors.  This felt a
 bit heavy handed, but does perform significantly better for the default
 check_interval of 5 minutes (we're using a few seconds when testing for
 DRAM errors).  I could be convinced to go with this, if anyone felt it
 was not too aggressive.

Testing:
 I used an error-injecting DIMM to create lots of correctable DRAM errors
 and verified that the polling interval accelerates.  The printk() only
 happens once per check_interval seconds.

Patch:
 This patch is against 2.6.21-rc7.
Signed-Off-By: NTim Hockin <thockin@google.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Avoid trying to set up vgacon if there's no vga hardware present.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Alan <alan@lxorguk.ukuu.org.uk>
Acked-by: NIngo Molnar <mingo@elte.hu>

`ret_from_sys_call' label no longer exist and `syscall_exit' label was
introduced instead.
Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data:cpu_llc_id from __ksymtab between '__ksymtab_cpu_llc_id' (at offset 0x4a0) and '__ksymtab_smp_num_siblings'

It is strange to export a __cpuinitdata symbols to modules, and no module
appears to use it anyway.

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

This patch just trivial converts from calling kernel_thread and daemonize
to just calling kthread_run.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Add comment and condense code to make use of native_local_ptep_get_and_clear
function.  Also, it turns out the 2-level and 3-level paging definitions were
identical, so move the common definition into pgtable.h
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

In situations where page table updates need only be made locally, and there is
no cross-processor A/D bit races involved, we need not use the heavyweight
xchg instruction to atomically fetch and clear page table entries.  Instead,
we can just read and clear them directly.

This introduces a neat optimization for non-SMP kernels; drop the atomic xchg
operations from page table updates.

Thanks to Michel Lespinasse for noting this potential optimization.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

When exiting from an address space, no special hypervisor notification of page
table updates needs to occur; direct page table hypervisors, such as Xen,
switch to another address space first (init_mm) and unprotects the page tables
to avoid the cost of trapping to the hypervisor for each pte_clear.  Shadow
mode hypervisors, such as VMI and lhype don't need to do the extra work of
calling through paravirt-ops, and can just directly clear the page table
entries without notifiying the hypervisor, since all the page tables are about
to be freed.

So introduce native_pte_clear functions which bypass any paravirt-ops
notification.  This results in a significant performance win for VMI and
removes some indirect calls from zap_pte_range.

Note the 3-level paging already had a native_pte_clear function, thus
demanding argument conformance and extra args for the 2-level definition.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

The locking of the xtime_lock around the cpu notifier is unessesary now.
At one time the tsc was used after a frequency change for timekeeping, but
the re-write of timekeeping no longer uses the TSC unless the frequency is
constant.

The variables that are changed in this section of code had also once been
used for timekeeping, but not any longer ..
Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Set use_alien_caches to 0 on non NUMA platforms.  And avoid calling the
cache_free_alien() when use_alien_caches is not set.  This will avoid the
cache miss that happens while dereferencing slabp to get nodeid.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

No need to maintain it anymore
Signed-off-by: NAndi Kleen <ak@suse.de>

Currently the i386 architecture checks the family for mce capability and this
removes that and uses the CPUID information.  Tested on a K8 revE and a
family10h processor.

This eliminates checking of a set AMD procesor family if mce is
allowed and relies on the information being in CPUID.
Signed-off-by: NJoachim Deguara <joachim.deguara@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Cleanup flush_tlb_others(), no functional change.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

IRQ is already disabled through local_irq_disable().  So
spin_lock_irqsave() can be replaced with spin_lock().
Signed-off-by: NHisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Avoid checking for cpu gone in mm hot path when CONFIG_HOTPLUG_CPU is not
defined.
Signed-off-by: NAnil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

We apparently hit the 1024 limit of vsyscall_0 zone when some debugging
options are set, or if __vsyscall_gtod_data is 64 bytes larger.

In order to save 128 bytes from the vsyscall_0 zone, we move __vgetcpu_mode
& __jiffies to vsyscall_2 zone where they really belong, since they are
used only from vgetcpu() (which is in this vsyscall_2 area).

After patch is applied, new layout is :

ffffffffff600000 T vgettimeofday
ffffffffff60004e t vsysc2
ffffffffff600140 t vread_hpet
ffffffffff600150 t vread_tsc
ffffffffff600180 D __vsyscall_gtod_data
ffffffffff600400 T vtime
ffffffffff600413 t vsysc1
ffffffffff600800 T vgetcpu
ffffffffff600870 D __vgetcpu_mode
ffffffffff600880 D __jiffies
ffffffffff600c00 T venosys_1
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

startup_ipi_hook depends on CONFIG_X86_LOCAL_APIC, so move it to the
right part of the paravirt_ops initialization.
Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Fix section mismatch warnings in mtrr code.
Fix line length on one source line.

WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.data: from .text.get_mtrr_state after 'get_mtrr_state' (at offset 0x103)
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text: from .text.get_mtrr_state after 'get_mtrr_state' (at offset 0x180)
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text: from .text.get_mtrr_state after 'get_mtrr_state' (at offset 0x199)
WARNING: arch/x86_64/kernel/built-in.o - Section mismatch: reference to .init.text: from .text.get_mtrr_state after 'get_mtrr_state' (at offset 0x1c1)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Use safe_apic_wait_icr_idle to check ICR idle bit if the vector is
NMI_VECTOR to avoid potential hangups in the event of crash when kdump
tries to stop the other CPUs.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

Use safe_apic_wait_icr_idle to check ICR idle bit if the vector is
NMI_VECTOR to avoid potential hangups in the event of crash when kdump
tries to stop the other CPUs.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

Implement __send_IPI_dest_field which can be used to send IPIs when the
"destination shorthand" field of the ICR is set to 00 (destination
field). Use it whenever possible.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

Implement __send_IPI_dest_field which can be used to send IPIs when the
"destination shorthand" field of the ICR is set to 00 (destination
field). Use it whenever possible.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

inquire_remote_apic is used for APIC debugging, so use
safe_apic_wait_icr_idle  instead of apic_wait_icr_idle to avoid possible
lockups when APIC delivery fails.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

__inquire_remote_apic is used for APIC debugging, so use
safe_apic_wait_icr_idle  instead of apic_wait_icr_idle to avoid possible
lockups when APIC delivery fails.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>

The functionality provided by the new safe_apic_wait_icr_idle is being
open-coded all over "kernel/smpboot.c". Use safe_apic_wait_icr_idle
instead to consolidate code and ease maintenance.
Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: NAndi Kleen <ak@suse.de>