- 15 10月, 2012 26 次提交
-
-
由 Shawn Guo 提交于
It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
mxc_device_init() is a core_initcall function used to register devices for mxc_aips_bus and mxc_ahb_bus, which are needed by gpio and dma device registration. Instead of being a core_initcall function, we have it called in soc specific initialization function before gpio and dma devices get registered, so that it will not be called for other platforms when we enable multi-platform support for imx. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Shawn Guo 提交于
The only mach/irqs.h user outside arch/arm/mach-imx is sound/soc/fsl/imx-pcm-fiq.c, which refers to mxc_set_irq_fiq(). Move the declaration into include/linux/platform_data/asoc-imx-ssi.h, so that we can remove mach/irqs.h includsion from imx-pcm-fiq.c. Inside arch/arm/mach-imx, the only users to mach/irqs.h are avic.c and tzic.c for referring to macro FIQ_START. Let's move the macro into irq-common.h and get rid of mach/irqs.h completely. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: alsa-devel@alsa-project.org
-
由 Shawn Guo 提交于
It moves a bunch of header files included in hardware.h and itself from mach-imx/include/mach to mach-imx, and updates users to include hardware.h rather than mach/hardware.h. The files in mach-imx/devices will need to include "../hardware.h". Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-fbdev@vger.kernel.org
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NChris Ball <cjb@laptop.org> Tested-by: NJavier Martin <javier.martin@vista-silicon.com> Cc: linux-mmc@vger.kernel.org
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: NJavier Martin <javier.martin@vista-silicon.com> Cc: linux-media@vger.kernel.org
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Tested-by: NJavier Martin <javier.martin@vista-silicon.com> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
由 Shawn Guo 提交于
Retrieve MEM and IRQ from resources rather than directly using the value by including machine header. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@linux.intel.com>
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: rtc-linux@googlegroups.com
-
由 Shawn Guo 提交于
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: linux-mtd@lists.infradead.org
-
由 Shawn Guo 提交于
This is some amount of work left/forgot from device tree conversion. Instead of checking cpu_is_xxx to determine the controller type, the driver should use platform_device_id, which should match the device tree compatible string. The patch changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type/version. It also updates the platform code and device tree source accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: linux-i2c@vger.kernel.org
-
由 Shawn Guo 提交于
The header ipu.h really belongs to dma subsystem rather than imx platform. Rename it to ipu-dma.h and put it into include/linux/dma/. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: linux-media@vger.kernel.org Cc: linux-fbdev@vger.kernel.org
-
由 Shawn Guo 提交于
The header mach/dma-mx1-mx2.h is used nowhere. Remove it. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/ulpi.h to mach-imx/ulpi.h, and update users to include ulpi.h rather than mach/ulpi.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/iram.h to mach-imx/iram.h, and update users to include iram.h rather than mach/iram.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/iim.h to mach-imx/iim.h, and update users to include iim.h rather than mach/iim.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/cpuidle.h to mach-imx/cpuidle.h, and update users to include cpuidle.h rather than mach/cpuidle.h. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
Rename mach-imx/include/mach/common.h to mach-imx/common.h and update all users to include common.h rather than mach/common.h. It also removes an unneeded inclusion to common.h in mach-imx/devices/devices.c. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
It's really unnecessary to have plat-mxc, and let's merge it into mach-imx. It's pretty much just a bunch of file renaming and Kconfig/Makefile merge. To make the change less invasive, we keep using Kconfig symbol CONFIG_ARCH_MXC for mach-imx sub-architecture. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
It moves platform device code from plat-mxc into mach-imx. Along with that, header devices-common.h gets moved from plat-mxc/include/mach/ into mach-imx/devices/. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
There is no need for device-imx*.h to include <soc>.h. Remove them and fix one indirect inclusion in mach-mx31ads.c. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
The board files in mach-imx are the only users of iomux drivers and headers. Move them into mach-imx from plat-mxc. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Shawn Guo 提交于
The headers that are only used by board files do not necessarily need to be in plat-mxc/include/mach. Move them to the same place as those board files. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Matt Fleming 提交于
The hostprogs need access to the CONFIG_* symbols found in include/generated/autoconf.h. But commit abbf1590 ("UAPI: Partition the header include path sets and add uapi/ header directories") replaced $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary include paths. This has the undesirable effect of breaking the EFI boot stub because the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is never compiled. It should also be noted that because $(USERINCLUDE) isn't exported by the top-level Makefile it's actually empty in arch/x86/boot/Makefile. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2012 2 次提交
-
-
由 Russell King 提交于
The large platform selection choice should be sorted by option string so it's easy to find the platform you're looking for. Fix the few options which are out of this order. Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
As suggested by Andrew Morton: This is a pet peeve of mine. Any time there's a long list of items (header file inclusions, kconfig entries, array initalisers, etc) and someone wants to add a new item, they *always* go and stick it at the end of the list. Guys, don't do this. Either put the new item into a randomly-chosen position or, probably better, alphanumerically sort the list. lets sort all our select statements alphanumerically. This commit was created by the following perl: while (<>) { while (/\\\s*$/) { $_ .= <>; } undef %selects if /^\s*config\s+/; if (/^\s+select\s+(\w+).*/) { if (defined($selects{$1})) { if ($selects{$1} eq $_) { print STDERR "Warning: removing duplicated $1 entry\n"; } else { print STDERR "Error: $1 differently selected\n". "\tOld: $selects{$1}\n". "\tNew: $_\n"; exit 1; } } $selects{$1} = $_; next; } if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or /^endif/ or /^endchoice/)) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } undef %selects; } print; } if (%selects) { foreach $k (sort (keys %selects)) { print "$selects{$k}"; } } It found two duplicates: Warning: removing duplicated S5P_SETUP_MIPIPHY entry Warning: removing duplicated HARDIRQS_SW_RESEND entry and they are identical duplicates, hence the shrinkage in the diffstat of two lines. We have four testers reporting success of this change (Tony, Stephen, Linus and Sekhar.) Acked-by: NJason Cooper <jason@lakedaemon.net> Acked-by: NTony Lindgren <tony@atomide.com> Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 10月, 2012 6 次提交
-
-
由 Jeff Layton 提交于
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Chris Metcalf 提交于
All the called functions expect interrupts to be enabled, and now one of them has started to warn about it, so make it correct. Signed-off-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* allow kernel_execve() leave the actual return to userland to caller (selected by CONFIG_GENERIC_KERNEL_EXECVE). Callers updated accordingly. * architecture that does select GENERIC_KERNEL_EXECVE in its Kconfig should have its ret_from_kernel_thread() do this: call schedule_tail call the callback left for it by copy_thread(); if it ever returns, that's because it has just done successful kernel_execve() jump to return from syscall IOW, its only difference from ret_from_fork() is that it does call the callback. * such an architecture should also get rid of ret_from_kernel_execve() and __ARCH_WANT_KERNEL_EXECVE This is the last part of infrastructure patches in that area - from that point on work on different architectures can live independently. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 12 10月, 2012 6 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
We actually do not do anything about it. Just return a default value of zero and if the kernel tries to write anything but 0 we BUG_ON. This fixes the case when an user tries to suspend the machine and it blows up in save_processor_state b/c 'read_cr8' is set to NULL and we get: kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100! invalid opcode: 0000 [#1] SMP Pid: 2687, comm: init.late Tainted: G O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs RIP: e030:[<ffffffff814d5f42>] [<ffffffff814d5f42>] save_processor_state+0x212/0x270 .. snip.. Call Trace: [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5 CC: stable@vger.kernel.org Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Konrad Rzeszutek Wilk 提交于
The hypervisor will trap it. However without this patch, we would crash as the .read_tscp is set to NULL. This patch fixes it and sets it to the native_read_tscp call. CC: stable@vger.kernel.org Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 David Howells 提交于
Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com>
-
由 Jason Wessel 提交于
When compiling without CONFIG_DEBUG_RODATA the following compiler warning is generated: arch/x86/kernel/kgdb.c: In function 'kgdb_arch_set_breakpoint': arch/x86/kernel/kgdb.c:749: warning: unused variable 'opc' The variable instantiation needs to be inside the #ifdef to make the warning go away. Reported-by: NThiago Rafael Becker <trbecker@trbecker.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
This fault was detected using the kgdb test suite on boot and it crashes recursively due to the fact that CONFIG_KPROBES on mips adds an extra die notifier in the page fault handler. The crash signature looks like this: kgdbts:RUN bad memory access test KGDB: re-enter exception: ALL breakpoints killed Call Trace: [<807b7548>] dump_stack+0x20/0x54 [<807b7548>] dump_stack+0x20/0x54 The fix for now is to have kgdb return immediately if the fault type is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed to happen. Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David S. Miller <davem@davemloft.net> Cc: <stable@vger.kernel.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-