- 26 9月, 2013 1 次提交
-
-
由 Mark Brown 提交于
This moves us towards being able to remove the duplicated register I/O functionality in ASoC. Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 15 5月, 2013 1 次提交
-
-
由 Lars-Peter Clausen 提交于
The sn95031_codec struct is not used outside of sn95031.c, so make it static. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Liam Girdwood 提交于
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 27 1月, 2012 1 次提交
-
-
由 Axel Lin 提交于
Since commit 33c5f969 "ASoC: Allow idle_bias_off to be specified in CODEC drivers", now we can set idle_bias_off flag in struct snd_soc_codec_driver for devices can unconditionally support idle_bias_off. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 28 11月, 2011 1 次提交
-
-
由 Mark Brown 提交于
Factors out a bit of boilerplate. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 11月, 2011 1 次提交
-
-
由 Lars-Peter Clausen 提交于
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
Lots of sound drivers were getting module.h via the implicit presence of it in <linux/device.h> but we are going to clean that up. So fix up those users now. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 03 10月, 2011 1 次提交
-
-
由 Axel Lin 提交于
This assignment is done by the snd_soc_register_codec so there is no need to redo it in probe function of a codec driver. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 30 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
No reason to use static variable for channel_index. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
sn95031_get_mic_bias() is not used outside this driver and it is a static function now. Thus drop exporting sn95031_get_mic_bias. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 23 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 9月, 2011 1 次提交
-
-
由 Axel Lin 提交于
In the case of no free channel available, current implementation returns 0 instead of negative errno. This patch fixes the logic to return -EINVAL if no free channel available. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 4月, 2011 1 次提交
-
-
由 Lu Guanqun 提交于
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." Fix this issue in codecs sn95031. Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 3月, 2011 2 次提交
-
-
由 Ingo Molnar 提交于
This is further fallout from delay.h removal from asm/apic.h and asm/dma.h: ca444564: x86: Stop including <linux/delay.h> in two asm header files Which caused this build failure: sound/soc/codecs/sn95031.c: In function ‘sn95031_get_mic_bias’: sound/soc/codecs/sn95031.c:153:2: error: implicit declaration of function ‘msleep’ [-Werror=implicit-function-declaration] Cc: Jean Delvare <khali@linux-fr.org> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20110325152014.297890ec@endymion.delvare> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lu Guanqun 提交于
Signed-off-by: NLu Guanqun <guanqun.lu@intel.com> Acked-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 16 2月, 2011 3 次提交
-
-
由 Vinod Koul 提交于
The tlv scale is defined as (min, step, mute). The mute is not supported here so put the value to 0 Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vinod Koul 提交于
This patch makes the DMIC dynamically connect to TX Mux, earlier code had erroneously made this as static path Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vinod Koul 提交于
This patch makes the codec playback rails (headset and speaker) depend on actual pins they control. This enables better power management of the codec Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 11 2月, 2011 1 次提交
-
-
由 Vinod Koul 提交于
This patch modifies the mfld_machine to use the new jack apis for adding the voltage zones for jack type detection. It also modifed TI sn95031 codec driver to use these new apis Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 2月, 2011 2 次提交
-
-
由 Vinod Koul 提交于
This patch adds support to read the mic bias voltage when a jack is inserted. It uses ADC to measure. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Vinod Koul 提交于
This patch adds support for jack detection and reporting in the codec It however is not fully functional as it doesn't measure adc to figure out what got inserted which will be added later Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 1月, 2011 1 次提交
-
-
由 Harsha Priya 提交于
This patch adds the support for capture path in sn95031 codec. This codec supports upto 6DMICs, 2 AMICs and Linein. The linein and AMICs are connected through a MUX to ADC. The TX paths can be assigned to any of the ADCs or DMICs. Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 1月, 2011 1 次提交
-
-
由 Vinod Koul 提交于
this patch fixes inconsistencies commented by Mark. This also fixes few other style things in audio_map & header file Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 1月, 2011 1 次提交
-
-
由 Vinod Koul 提交于
This patch adds the sn95031 asoc codec driver. This driver currently supports only playback. Capture and jack detection to be added later Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NHarsha Priya <priya.harsha@intel.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-