Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 30 9月, 2015 1 次提交
  3. 26 9月, 2015 1 次提交
  5. 18 9月, 2015 7 次提交
  7. 14 8月, 2015 1 次提交
  9. 13 6月, 2015 1 次提交
  11. 12 6月, 2015 1 次提交
  13. 28 5月, 2015 2 次提交
    • F
      ip_fragment: don't forward defragmented DF packet · d6b915e2
      由 Florian Westphal 提交于 
      We currently always send fragments without DF bit set.

Thus, given following setup:

mtu1500 - mtu1500:1400 - mtu1400:1280 - mtu1280
   A           R1              R2         B

Where R1 and R2 run linux with netfilter defragmentation/conntrack
enabled, then if Host A sent a fragmented packet _with_ DF set to B, R1
will respond with icmp too big error if one of these fragments exceeded
1400 bytes.

However, if R1 receives fragment sizes 1200 and 100, it would
forward the reassembled packet without refragmenting, i.e.
R2 will send an icmp error in response to a packet that was never sent,
citing mtu that the original sender never exceeded.

The other minor issue is that a refragmentation on R1 will conceal the
MTU of R2-B since refragmentation does not set DF bit on the fragments.

This modifies ip_fragment so that we track largest fragment size seen
both for DF and non-DF packets, and set frag_max_size to the largest
value.

If the DF fragment size is larger or equal to the non-df one, we will
consider the packet a path mtu probe:
We set DF bit on the reassembled skb and also tag it with a new IPCB flag
to force refragmentation even if skb fits outdev mtu.

We will also set DF bit on each fragment in this case.

Joint work with Hannes Frederic Sowa.
Reported-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d6b915e2
    • F
      net: ipv4: avoid repeated calls to ip_skb_dst_mtu helper · c5501eb3
      由 Florian Westphal 提交于 
      ip_skb_dst_mtu is small inline helper, but its called in several places.

before: 17061      44       0   17105    42d1 net/ipv4/ip_output.o
after:  16805      44       0   16849    41d1 net/ipv4/ip_output.o
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c5501eb3
  15. 25 5月, 2015 1 次提交
  17. 19 5月, 2015 1 次提交
  19. 14 5月, 2015 1 次提交
  21. 08 4月, 2015 2 次提交
    • S
      net: remove extra newlines · 8bc0034c
      由 Sheng Yong 提交于 
      Signed-off-by: NSheng Yong <shengyong1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8bc0034c
    • D
      netfilter: Pass socket pointer down through okfn(). · 7026b1dd
      由 David Miller 提交于 
      On the output paths in particular, we have to sometimes deal with two
socket contexts.  First, and usually skb->sk, is the local socket that
generated the frame.

And second, is potentially the socket used to control a tunneling
socket, such as one the encapsulates using UDP.

We do not want to disassociate skb->sk when encapsulating in order
to fix this, because that would break socket memory accounting.

The most extreme case where this can cause huge problems is an
AF_PACKET socket transmitting over a vxlan device.  We hit code
paths doing checks that assume they are dealing with an ipv4
socket, but are actually operating upon the AF_PACKET one.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      7026b1dd
  23. 04 4月, 2015 2 次提交
  25. 26 3月, 2015 1 次提交
  27. 23 3月, 2015 1 次提交
  29. 03 3月, 2015 1 次提交
    • M
      udp: only allow UFO for packets from SOCK_DGRAM sockets · acf8dd0a
      由 Michal Kubeček 提交于 
      If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a
UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to
CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer
checksum is to be computed on segmentation. However, in this case,
skb->csum_start and skb->csum_offset are never set as raw socket
transmit path bypasses udp_send_skb() where they are usually set. As a
result, driver may access invalid memory when trying to calculate the
checksum and store the result (as observed in virtio_net driver).

Moreover, the very idea of modifying the userspace provided UDP header
is IMHO against raw socket semantics (I wasn't able to find a document
clearly stating this or the opposite, though). And while allowing
CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit
too intrusive change just to handle a corner case like this. Therefore
disallowing UFO for packets from SOCK_DGRAM seems to be the best option.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      acf8dd0a
  31. 04 2月, 2015 1 次提交
  33. 02 2月, 2015 1 次提交
    • E
      ipv4: tcp: get rid of ugly unicast_sock · bdbbb852
      由 Eric Dumazet 提交于 
      In commit be9f4a44 ("ipv4: tcp: remove per net tcp_sock")
I tried to address contention on a socket lock, but the solution
I chose was horrible :

commit 3a7c384f ("ipv4: tcp: unicast_sock should not land outside
of TCP stack") addressed a selinux regression.

commit 0980e56e ("ipv4: tcp: set unicast_sock uc_ttl to -1")
took care of another regression.

commit b5ec8eea ("ipv4: fix ip_send_skb()") fixed another regression.

commit 811230cd ("tcp: ipv4: initialize unicast_sock sk_pacing_rate")
was another shot in the dark.

Really, just use a proper socket per cpu, and remove the skb_orphan()
call, to re-enable flow control.

This solves a serious problem with FQ packet scheduler when used in
hostile environments, as we do not want to allocate a flow structure
for every RST packet sent in response to a spoofed packet.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      bdbbb852
  35. 29 1月, 2015 1 次提交
  37. 10 12月, 2014 2 次提交
  39. 07 11月, 2014 1 次提交
  41. 21 10月, 2014 1 次提交
    • F
      net: make skb_gso_segment error handling more robust · 330966e5
      由 Florian Westphal 提交于 
      skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL.  This can happen when GSO is used for header verification.

However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.

Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.

However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.

It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      330966e5
  43. 18 10月, 2014 1 次提交
  45. 03 10月, 2014 1 次提交
  47. 29 9月, 2014 1 次提交
  49. 06 8月, 2014 1 次提交
    • W
      net-timestamp: add key to disambiguate concurrent datagrams · 09c2d251
      由 Willem de Bruijn 提交于 
      Datagrams timestamped on transmission can coexist in the kernel stack
and be reordered in packet scheduling. When reading looped datagrams
from the socket error queue it is not always possible to unique
correlate looped data with original send() call (for application
level retransmits). Even if possible, it may be expensive and complex,
requiring packet inspection.

Introduce a data-independent ID mechanism to associate timestamps with
send calls. Pass an ID alongside the timestamp in field ee_data of
sock_extended_err.

The ID is a simple 32 bit unsigned int that is associated with the
socket and incremented on each send() call for which software tx
timestamp generation is enabled.

The feature is enabled only if SOF_TIMESTAMPING_OPT_ID is set, to
avoid changing ee_data for existing applications that expect it 0.
The counter is reset each time the flag is reenabled. Reenabling
does not change the ID of already submitted data. It is possible
to receive out of order IDs if the timestamp stream is not quiesced
first.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      09c2d251
  51. 16 7月, 2014 1 次提交
  53. 03 6月, 2014 1 次提交
    • E
      inetpeer: get rid of ip_id_count · 73f156a6
      由 Eric Dumazet 提交于 
      Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      73f156a6
  55. 14 5月, 2014 1 次提交
    • L
      net: add a sysctl to reflect the fwmark on replies · e110861f
      由 Lorenzo Colitti 提交于 
      Kernel-originated IP packets that have no user socket associated
with them (e.g., ICMP errors and echo replies, TCP RSTs, etc.)
are emitted with a mark of zero. Add a sysctl to make them have
the same mark as the packet they are replying to.

This allows an administrator that wishes to do so to use
mark-based routing, firewalling, etc. for these replies by
marking the original packets inbound.

Tested using user-mode linux:
 - ICMP/ICMPv6 echo replies and errors.
 - TCP RST packets (IPv4 and IPv6).
Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e110861f
  57. 13 5月, 2014 1 次提交
  59. 08 5月, 2014 1 次提交