This tracer was temporarily removed in 64166699 (workqueue:
temporarily remove workqueue tracing, 2010-06-29) but never
reinstated after concurrency managed workqueues were completed.
For almost two years it hasn't been compilable so it seems nobody
is using it. Delete it.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>

Do not build kernel/trace/rpm-traces.c if CONFIG_PM_RUNTIME is not
set, which avoids a build failure.

[rjw: Added the changelog and modified the subject slightly.]
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This patch introduces 3 trace points to prepare for tracing
rpm_idle/rpm_suspend/rpm_resume functions, so we can use these
trace points to replace the current dev_dbg().
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Adding automated tests running as late_initcall. Tests are
compiled in with CONFIG_FTRACE_STARTUP_TEST option.

Adding test event "ftrace_test_filter" used to simulate
filter processing during event occurance.

String filters are compiled and tested against several
test events with different values.

Also testing that evaluation of explicit predicates is ommited
due to the lazy filter evaluation.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1313072754-4620-11-git-send-email-jolsa@redhat.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

DEFINE_TRACE should also exist when CONFIG_EVENT_TRACING=n. Otherwise, setting
only TRACEPOINTS=y is broken.
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20101028153117.GA4051@Krystal>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add in a helper function to allow the kdb shell to dump the ftrace
buffer.

Modify trace.c to expose the capability to iterate over the ftrace
buffer in a read only capacity.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>

The sysprof ftrace plugin doesn't seem to be seriously used
somewhere. There is a branch in the sysprof tree that makes
an interface to it, but the real sysprof tool uses either its
own module or perf events.

Drop the sysprof ftrace plugin then, as it's mostly useless.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSoeren Sandmann <sandmann@daimi.au.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>

The ksym (breakpoint) ftrace plugin has been superseded by perf
tools that are much more poweful to use the cpu breakpoints.
This tracer doesn't bring more feature. It has been deprecated
for a while now, lets remove it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>

We have been resisting new ftrace plugins and removing existing
ones, and kmemtrace has been superseded by kmem trace events
and perf-kmem, so we remove it.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
[ remove kmemtrace from the makefile, handle slob too ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

The boot tracer is useless. It simply logs the initcalls
but in fact these initcalls are also logged through printk
while using the initcall_debug kernel parameter.

Nobody seem to be using it so far. Then just remove it.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Chase Douglas <chase.douglas@canonical.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <20100526105753.GA5677@cr0.nay.redhat.com>
[ remove the hooks in main.c, and the headers ]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Support for the PMU's BTS features has been upstreamed in
v2.6.32, but we still have the old and disabled ptrace-BTS,
as Linus noticed it not so long ago.

It's buggy: TIF_DEBUGCTLMSR is trampling all over that MSR without
regard for other uses (perf) and doesn't provide the flexibility
needed for perf either.

Its users are ptrace-block-step and ptrace-bts, since ptrace-bts
was never used and ptrace-block-step can be implemented using a
much simpler approach.

So axe all 3000 lines of it. That includes the *locked_memory*()
APIs in mm/mlock.c as well.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <20100325135413.938004390@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Drop the obsolete "profile" naming used by perf for trace events.
Perf can now do more than simple events counting, so generalize
the API naming.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>

Quoted from Ingo:

| This reminds me - i think we should eliminate CONFIG_EVENT_PROFILE -
| it's an unnecessary Kconfig complication. If both PERF_EVENTS and
| EVENT_TRACING is enabled we should expose generic tracepoints.
|
| Nor is it limited to event 'profiling', so it has become a misnomer as
| well.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4B2F1557.2050705@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rename Kprobes-based event tracer to kprobes-based tracing event
(kprobe-event), since it is not a tracer but an extensible
tracing event interface.

This also changes CONFIG_KPROBE_TRACER to CONFIG_KPROBE_EVENT
and sets it y by default.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
LKML-Reference: <20091104001247.3454.14131.stgit@harusame>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch converts the existing power tracer into an event tracer,
so that power events (C states and frequency changes) can be
tracked via "perf".

This also removes the perl script that was used to demo the tracer;
its functionality is being replaced entirely with timechart.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090912130542.6d314860@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add kprobes-based event tracer on ftrace.

This tracer is similar to the events tracer which is based on Tracepoint
infrastructure. Instead of Tracepoint, this tracer is based on kprobes
(kprobe and kretprobe). It probes anywhere where kprobes can probe(this
 means, all functions body except for __kprobes functions).

Similar to the events tracer, this tracer doesn't need to be activated
via current_tracer, instead of that, just set probe points via
/sys/kernel/debug/tracing/kprobe_events. And you can set filters on each
probe events via /sys/kernel/debug/tracing/events/kprobes/<EVENT>/filter.

This tracer supports following probe arguments for each probe.

  %REG  : Fetch register REG
  sN    : Fetch Nth entry of stack (N >= 0)
  sa    : Fetch stack address.
  @ADDR : Fetch memory at ADDR (ADDR should be in kernel)
  @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)
  aN    : Fetch function argument. (N >= 0)
  rv    : Fetch return value.
  ra    : Fetch return address.
  +|-offs(FETCHARG) : fetch memory at FETCHARG +|- offs address.

See Documentation/trace/kprobetrace.txt in the next patch for details.

Changes from v13:
 - Support 'sa' for stack address.
 - Use call->data instead of container_of() macro.

[fweisbec@gmail.com: Fixed conflict against latest tracing/core]
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203510.31965.29123.stgit@localhost.localdomain>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Steven Rostedt has suggested that Neil work with the tracing
folks, trying to use TRACE_EVENT as the mechanism for
implementation.  And if that doesn't workout we can investigate
other solutions such as that one which was tried here.

This reverts the following 2 commits:

5a165657
("net: skb ftracer - Add config option to enable new ftracer (v3)")

9ec04da7
("net: skb ftracer - Add actual ftrace code to kernel (v3)")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb allocation / consumption correlator

Add ftracer module to kernel to print out a list that correlates a process id,
an skb it read, and the numa nodes on wich the process was running when it was
read along with the numa node the skbuff was allocated on.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>

 Makefile            |    1
 trace.h             |   19 ++++++
 trace_skb_sources.c |  154 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TRACE_EVENT is a more generic way to define tracepoints. Doing so adds
these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
  ...

Cons:

  - no dev_t info for the output of plug, unplug_timer and unplug_io events.
    no dev_t info for getrq and sleeprq events if bio == NULL.
    no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL.

    This is mainly because we can't get the deivce from a request queue.
    But this may change in the future.

  - A packet command is converted to a string in TP_assign, not TP_print.
    While blktrace do the convertion just before output.

    Since pc requests should be rather rare, this is not a big issue.

  - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT
    has a unique format, which means we have some unused data in a trace entry.

    The overhead is minimized by using __dynamic_array() instead of __array().

I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing:

      dd                   dd + ioctl blktrace       dd + TRACE_EVENT (splice)
1     7.36s, 42.7 MB/s     7.50s, 42.0 MB/s          7.41s, 42.5 MB/s
2     7.43s, 42.3 MB/s     7.48s, 42.1 MB/s          7.43s, 42.4 MB/s
3     7.38s, 42.6 MB/s     7.45s, 42.2 MB/s          7.41s, 42.5 MB/s

So the overhead of tracing is very small, and no regression when using
those trace events vs blktrace.

And the binary output of TRACE_EVENT is much smaller than blktrace:

 # ls -l -h
 -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0
 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1
 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out

Following are some comparisons between TRACE_EVENT and blktrace:

plug:
  kjournald-480   [000]   303.084981: block_plug: [kjournald]
  kjournald-480   [000]   303.084981:   8,0    P   N [kjournald]

unplug_io:
  kblockd/0-118   [000]   300.052973: block_unplug_io: [kblockd/0] 1
  kblockd/0-118   [000]   300.052974:   8,0    U   N [kblockd/0] 1

remap:
  kjournald-480   [000]   303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384
  kjournald-480   [000]   303.085043:   8,0    A   W 102736992 + 8 <- (8,8) 33384

bio_backmerge:
  kjournald-480   [000]   303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald]
  kjournald-480   [000]   303.085086:   8,0    M   W 102737032 + 8 [kjournald]

getrq:
  kjournald-480   [000]   303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084975:   8,0    G   W 102736984 + 8 [kjournald]

  bash-2066  [001]  1072.953770:   8,0    G   N [bash]
  bash-2066  [001]  1072.953773: block_getrq: 0,0 N 0 + 0 [bash]

rq_complete:
  konsole-2065  [001]   300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0]
  konsole-2065  [001]   300.053191:   8,0    C   W 103669040 + 16 [0]

  ksoftirqd/1-7   [001]  1072.953811:   8,0    C   N (5a 00 08 00 00 00 00 00 24 00) [0]
  ksoftirqd/1-7   [001]  1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0]

rq_insert:
  kjournald-480   [000]   303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald]
  kjournald-480   [000]   303.084986:   8,0    I   W 102736984 + 8 [kjournald]

Changelog from v2 -> v3:

- use the newly introduced __dynamic_array().

Changelog from v1 -> v2:

- use __string() instead of __array() to minimize the memory required
  to store hex dump of rq->cmd().

- support large pc requests.

- add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT.

- some cleanups.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A2DF669.5070905@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds an ftrace plugin to detect and profile memory access over kernel
variables. It uses HW Breakpoint interfaces to 'watch memory addresses.
Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

This patch adds code that can benchmark the ring buffer as well as
test it. This code can be compiled into the kernel (not recommended)
or as a module.

A separate ring buffer is used to not interfer with other users, like
ftrace. It creates a producer and a consumer (option to disable creation
of the consumer) and will run for 10 seconds, then sleep for 10 seconds
and then repeat.

While running, the producer will write 10 byte loads into the ring
buffer with just putting in the current CPU number. The reader will
continually try to read the buffer. The reader will alternate from reading
the buffer via event by event, or by full pages.

The output is a pr_info, thus it will fill up the syslogs.

  Starting ring buffer hammer
  End ring buffer hammer
  Time:     9000349 (usecs)
  Overruns: 12578640
  Read:     5358440  (by events)
  Entries:  0
  Total:    17937080
  Missed:   0
  Hit:      17937080
  Entries per millisec: 1993
  501 ns per entry
  Sleeping for 10 secs
  Starting ring buffer hammer
  End ring buffer hammer
  Time:     9936350 (usecs)
  Overruns: 0
  Read:     28146644  (by pages)
  Entries:  74
  Total:    28146718
  Missed:   0
  Hit:      28146718
  Entries per millisec: 2832
  353 ns per entry
  Sleeping for 10 secs

Time:      is the time the test ran
Overruns:  the number of events that were overwritten and not read
Read:      the number of events read (either by pages or events)
Entries:   the number of entries left in the buffer
                 (the by pages will only read full pages)
Total:     Entries + Read + Overruns
Missed:    the number of entries that failed to write
Hit:       the number of entries that were written

The above example shows that it takes ~353 nanosecs per entry when
there is a reader, reading by pages (and no overruns)

The event by event reader slowed the producer down to 501 nanosecs.

[ Impact: see how changes to the ring buffer affect stability and performance ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch moves the ftrace creation into include/trace/ftrace.h and
simplifies the work of developers in adding new tracepoints.
Just the act of creating the trace points in include/trace and including
define_trace.h will create the events in the debugfs/tracing/events
directory.

This patch removes the need of include/trace/trace_events.h
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Jeremy Fitzhardinge reported this build failure:

 LD	 .tmp_vmlinux1
 arch/x86/kernel/built-in.o: In function `ds_take_timestamp':
 git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'
 git/linux/arch/x86/kernel/ds.c:1380: undefined reference to `trace_clock_global'

Which is due to !CONFIG_TRACING && CONFIG_X86_DS=y.

Expose the trace clock code to CONFIG_X86_DS as well.

[ Unfortunately librarizing doesnt work well - ancient architectures
  with no raw_local_irq_save() primitive break the build. ]
Reported-by: NJeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49E4413F.7070700@goop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a new config option, CONFIG_EVENT_TRACING that gets selected
when CONFIG_TRACING is selected and adds everything needed by the stuff
in trace_export - basically all the event tracing support needed by e.g.
bprint, minus the actual events, which are only included if
CONFIG_EVENT_TRACER is selected.

So CONFIG_EVENT_TRACER can be used to turn on or off the generated events
(what I think of as the 'event tracer'), while CONFIG_EVENT_TRACING turns
on or off the base event tracing support used by both the event tracer and
the other things such as bprint that can't be configured out.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: fweisbec@gmail.com
LKML-Reference: <1239178441.10295.34.camel@tropicana>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds per-event filtering to the event tracing subsystem.

It adds a 'filter' debugfs file to each event directory.  This file can
be written to to set filters; reading from it will display the current
set of filters set for that event.

Basically, any field listed in the 'format' file for an event can be
filtered on (including strings, but not yet other array types) using
either matching ('==') or non-matching ('!=') 'predicates'.  A
'predicate' can be either a single expression:

 # echo pid != 0 > filter

 # cat filter
 pid != 0

or a compound expression of up to 8 sub-expressions combined using '&&'
or '||':

 # echo comm == Xorg > filter
 # echo "&& sig != 29" > filter

 # cat filter
 comm == Xorg
 && sig != 29

Only events having field values matching an expression will be available
in the trace output; non-matching events are discarded.

Note that a compound expression is built up by echoing each
sub-expression separately - it's not the most efficient way to do
things, but it keeps the parser simple and assumes that compound
expressions will be relatively uncommon.  In any case, a subsequent
patch introducing a way to set filters for entire subsystems should
mitigate any need to do this for lots of events.

Setting a filter without an '&&' or '||' clears the previous filter
completely and sets the filter to the new expression:

 # cat filter
 comm == Xorg
 && sig != 29

 # echo comm != Xorg

 # cat filter
 comm != Xorg

To clear a filter, echo 0 to the filter file:

 # echo 0 > filter
 # cat filter
 none

The limit of 8 predicates for a compound expression is arbitrary - for
efficiency, it's implemented as an array of pointers to predicates, and
8 seemed more than enough for any filter...
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1237710665.7703.48.camel@charm-linux>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new tracing infrastructure feature

Provide infrastructure to generate software perf counter events
from tracepoints.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20090319194233.557364871@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Provide basic callbacks to do syscall tracing.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <1236401580-5758-2-git-send-email-fweisbec@gmail.com>
[ simplified it to a trace_printk() for now. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: faster and lighter tracing

Now that we have trace_bprintk() which is faster and consume lesser
memory than trace_printk() and has the same purpose, we can now drop
the old implementation in favour of the binary one from trace_bprintk(),
which means we move all the implementation of trace_bprintk() to
trace_printk(), so the Api doesn't change except that we must now use
trace_seq_bprintk() to print the TRACE_PRINT entries.

Some changes result of this:

- Previously, trace_bprintk depended of a single tracer and couldn't
  work without. This tracer has been dropped and the whole implementation
  of trace_printk() (like the module formats management) is now integrated
  in the tracing core (comes with CONFIG_TRACING), though we keep the file
  trace_printk (previously trace_bprintk.c) where we can find the module
  management. Thus we don't overflow trace.c

- changes some parts to use trace_seq_bprintk() to print TRACE_PRINT entries.

- change a bit trace_printk/trace_vprintk macros to support non-builtin formats
  constants, and fix 'const' qualifiers warnings. But this is all transparent for
  developers.

- etc...

V2:

- Rebase against last changes
- Fix mispell on the changelog

V3:

- Rebase against last changes (moving trace_printk() to kernel.h)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: save on memory for tracing

Current tracers are typically using a struct(like struct ftrace_entry,
struct ctx_switch_entry, struct special_entr etc...)to record a binary
event. These structs can only record a their own kind of events.
A new kind of tracer need a new struct and a lot of code too handle it.

So we need a generic binary record for events. This infrastructure
is for this purpose.

[fweisbec@gmail.com: rebase against latest -tip, make it safe while sched
tracing as reported by Steven Rostedt]
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236356510-8381-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: allow user apps to read binary format of basic ftrace entries

Currently, only defined raw events export their formats so a binary
reader can parse them. There's no reason that the default ftrace entries
can't export their formats.

This patch adds a subsystem called "ftrace" in the events directory
that includes the ftrace entries for basic ftrace recorded items.

These only have three files in the events directory:

 type             : printf
 available_types  : printf
 format           : format for the event entry

For example:

 # cat /debug/tracing/events/ftrace/wakeup/format
name: wakeup
ID: 3
format:
        field:unsigned char type;       offset:0;       size:1;
        field:unsigned char flags;      offset:1;       size:1;
        field:unsigned char preempt_count;      offset:2;       size:1;
        field:int pid;  offset:4;       size:4;
        field:int tgid; offset:8;       size:4;

        field:unsigned int prev_pid;    offset:12;      size:4;
        field:unsigned char prev_prio;  offset:16;      size:1;
        field:unsigned char prev_state; offset:17;      size:1;
        field:unsigned int next_pid;    offset:20;      size:4;
        field:unsigned char next_prio;  offset:24;      size:1;
        field:unsigned char next_state; offset:25;      size:1;
        field:unsigned int next_cpu;    offset:28;      size:4;

print fmt: "%u:%u:%u  ==+ %u:%u:%u [%03u]"
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: implement new tracing timestamp APIs

Add three trace clock variants, with differing scalability/precision
tradeoffs:

 -   local: CPU-local trace clock
 -  medium: scalable global clock with some jitter
 -  global: globally monotonic, serialized clock

Make the ring-buffer use the local trace clock internally.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch changes the trace/sched.h to use the DECLARE_TRACE_FMT
such that they are automatically registered with the event tracer.

And it also adds the tracing sched headers to kernel/trace/events.c
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch creates the event tracing infrastructure of ftrace.
It will create the files:

 /debug/tracing/available_events
 /debug/tracing/set_event

The available_events will list the trace points that have been
registered with the event tracer.

set_events will allow the user to enable or disable an event hook.

example:

 # echo sched_wakeup > /debug/tracing/set_event

Will enable the sched_wakeup event (if it is registered).

 # echo "!sched_wakeup" >> /debug/tracing/set_event

Will disable the sched_wakeup event (and only that event).

 # echo > /debug/tracing/set_event

Will disable all events (notice the '>')

 # cat /debug/tracing/available_events > /debug/tracing/set_event

Will enable all registered event hooks.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: cleanup

Move blktrace.c to kernel/trace, also move its config entry.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new tracer

The workqueue tracer provides some statistical informations
about each cpu workqueue thread such as the number of the
works inserted and executed since their creation. It can help
to evaluate the amount of work each of them have to perform.
For example it can help a developer to decide whether he should
choose a per cpu workqueue instead of a singlethreaded one.

It only traces statistical informations for now but it will probably later
provide event tracing too.

Such a tracer could help too, and be improved, to help rt priority sorted
workqueue development.

To have a snapshot of the workqueues state at any time, just do

cat /debugfs/tracing/trace_stat/workqueues

Ie:

  1    125        125       reiserfs/1
  1      0          0       scsi_tgtd/1
  1      0          0       aio/1
  1      0          0       ata/1
  1    114        114       kblockd/1
  1      0          0       kintegrityd/1
  1   2147       2147       events/1

  0      0          0       kpsmoused
  0    105        105       reiserfs/0
  0      0          0       scsi_tgtd/0
  0      0          0       aio/0
  0      0          0       ata_aux
  0      0          0       ata/0
  0      0          0       cqueue
  0      0          0       kacpi_notify
  0      0          0       kacpid
  0    149        149       kblockd/0
  0      0          0       kintegrityd/0
  0   1000       1000       khelper
  0   2270       2270       events/0

Changes in V2:

_ Drop the static array based on NR_CPU and dynamically allocate the stat array
  with num_possible_cpus() and other cpu mask facilities....
_ Trace workqueue insertion at a bit lower level (insert_work instead of queue_work) to handle
  even the workqueue barriers.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new tracer plugin

This patch adapts kmemtrace raw events tracing to the unified tracing API.

To enable and use this tracer, just do the following:

 echo kmemtrace > /debugfs/tracing/current_tracer
 cat /debugfs/tracing/trace

You will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584

That was to stay backward compatible with the format output produced in
inux/tracepoint.h.

This is the default ouput, but note that I tried something else.

If you change an option:

echo kmem_minimalistic > /debugfs/trace_options

and then cat /debugfs/trace, you will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

   -      C                            0xffff88007c088780          file_free_rcu
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc780     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc870     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc960     -1   d_alloc
   +      K   1304   1312   000000d0   0xffff8800791d7340     -1   reiserfs_alloc_inode
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K    992   1000   000000d0   0xffff880079045b58     -1   alloc_inode
   +      K    768   1024   000080d0   0xffff88007c096400     -1   alloc_pipe_info
   +      K    240    240   000000d0   0xffff8800790dca50     -1   d_alloc
   +      K    272    320   000080d0   0xffff88007c088780     -1   get_empty_filp
   +      K    272    320   000080d0   0xffff88007c088000     -1   get_empty_filp

Yeah I shall confess kmem_minimalistic should be: kmem_alternative.

Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.

On the ALLOC/FREE column, + means an allocation and - a free.

On the type column, you have K = kmalloc, C = cache, P = page

I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....

About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.

I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: extend the tracing API

The goal of this patch is to normalize and make more easy the
implementation of statistical (histogram) tracing.

It implements a trace_stat file into the /debugfs/tracing directory where
one can print a one-shot output of statistics/histogram entries.

A tracer has to provide two basic iterator callbacks:

  stat_start() => the first entry
  stat_next(prev, idx) => the next one.

Note that it is adapted for arrays or hash tables or lists.... since it
provides a pointer to the previous entry and the current index of the
iterator.

These two callbacks are called to get a snapshot of the statistics at each
opening of the trace_stat file because. The values are so updated between
two "cat trace_stat". And the tracer is free to lock its datas during the
iteration to keep consistent values.

Since it is almost always interesting to sort statisticals values to
address the problems by priority, this infrastructure provides a "sorting"
of the stat entries too if desired. A tracer has just to provide a
stat_cmp callback to compare two entries and the stat tracing
infrastructure will build a sorted list of the given entries.

A last callback, called stat_headers, can be implemented by a tracer to
output headers on its trace.

If one of these callbacks is changed on runtime, it just have to signal it
to the stat tracing API by calling the init_tracer_stat() helper.

Changes in V2:

- Fix a memory leak if the user opens multiple times the trace_stat file
  without closing it. Now we always free our list before rebuilding it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: simplify/generalize/refactor trace.c

The trace.c file is becoming more difficult to maintain due to the
growing number of events. There is several formats that an event may
be printed. This patch sets up the infrastructure of an event hash to
allow for events to register how they should be printed.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: restructure code, cleanup

Remove BTS bits from the hw-branch-tracer (renamed from bts-tracer) and
use the ds interface.
Signed-off-by: NMarkus Metzger <markut.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new "power-tracer" ftrace plugin

This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.

An example way of using this is:

 mount -t debugfs none /sys/kernel/debug
 echo cstate > /sys/kernel/debug/tracing/current_tracer
 echo 1 > /sys/kernel/debug/tracing/tracing_enabled
 sleep 1
 echo 0 > /sys/kernel/debug/tracing/tracing_enabled
 cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>