Keep the documentation in the header file since there is no good place
for it in mutex.c: there are two rather different implementations with
different EXPORT_SYMBOLs for each function.
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: =?UTF-8?q?Nicolai=20H=C3=A4hnle?= <Nicolai.Haehnle@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <dev@mblankhorst.nl>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org
Link: http://lkml.kernel.org/r/1482346000-9927-6-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We will add a new field to struct mutex_waiter.  This field must be
initialized for all waiters if any waiter uses the ww_use_ctx path.

So there is a trade-off: Keep ww_mutex locking without a context on
the faster non-use_ww_ctx path, at the cost of adding the
initialization to all mutex locks (including non-ww_mutexes), or avoid
the additional cost for non-ww_mutex locks, at the cost of adding
additional checks to the use_ww_ctx path.

We take the latter choice.  It may be worth eliminating the users of
ww_mutex_lock(lock, NULL), but there are a lot of them.
Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <dev@mblankhorst.nl>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org
Link: http://lkml.kernel.org/r/1482346000-9927-5-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The function will be re-used in subsequent patches.
Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <dev@mblankhorst.nl>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dri-devel@lists.freedesktop.org
Link: http://lkml.kernel.org/r/1482346000-9927-4-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

While reviewing the ww_mutex patches, I noticed that it was still
possible to (incorrectly) succeed for (incorrect) code like:

	mutex_lock(&a);
	mutex_lock(&a);

This was possible if the second mutex_lock() would block (as expected)
but then receive a spurious wakeup. At that point it would find itself
at the front of the queue, request a handoff and instantly claim
ownership and continue, since owner would point to itself.

Avoid this scenario and simplify the code by introducing a third low
bit to signal handoff pickup. So once we request handoff, unlock
clears the handoff bit and sets the pickup bit along with the new
owner.

This also removes the need for the .handoff argument to
__mutex_trylock(), since that becomes superfluous with PICKUP.

In order to guarantee enough low bits, ensure task_struct alignment is
at least L1_CACHE_BYTES (which seems a good ideal regardless).
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9d659ae1 ("locking/mutex: Add lock handoff to avoid starvation")
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The use of any kind of wait queue is an overkill for pcpu-rwsems.
While one option would be to use the less heavy simple (swait)
flavor, this is still too much for what pcpu-rwsems needs. For one,
we do not care about any sort of queuing in that the only (rare) time
writers (and readers, for that matter) are queued is when trying to
acquire the regular contended rw_sem. There cannot be any further
queuing as writers are serialized by the rw_sem in the first place.

Given that percpu_down_write() must not be called after exit_notify(),
we can replace the bulky waitqueue with rcuwait such that a writer
can wait for its turn to take the lock. As such, we can avoid the
queue handling and locking overhead.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1484148146-14210-3-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is a nasty interface and setting the state of a foreign task must
not be done. As of the following commit:

  be628be0 ("bcache: Make gc wakeup sane, remove set_task_state()")

... everyone in the kernel calls set_task_state() with current, allowing
the helper to be removed.

However, as the comment indicates, it is still around for those archs
where computing current is more expensive than using a pointer, at least
in theory. An important arch that is affected is arm64, however this has
been addressed now [1] and performance is up to par making no difference
with either calls.

Of all the callers, if any, it's the locking bits that would care most
about this -- ie: we end up passing a tsk pointer to a lot of the lock
slowpath, and setting ->state on that. The following numbers are based
on two tests: a custom ad-hoc microbenchmark that just measures
latencies (for ~65 million calls) between get_task_state() vs
get_current_state().

Secondly for a higher overview, an unlink microbenchmark was used,
which pounds on a single file with open, close,unlink combos with
increasing thread counts (up to 4x ncpus). While the workload is quite
unrealistic, it does contend a lot on the inode mutex or now rwsem.

[1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com

== 1. x86-64 ==

Avg runtime set_task_state():    601 msecs
Avg runtime set_current_state(): 552 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      36089.26 (  0.00%)    38977.33 (  8.00%)
Hmean    unlink1-processes-5      28555.01 (  0.00%)    29832.55 (  4.28%)
Hmean    unlink1-processes-8      37323.75 (  0.00%)    44974.57 ( 20.50%)
Hmean    unlink1-processes-12     43571.88 (  0.00%)    44283.01 (  1.63%)
Hmean    unlink1-processes-21     34431.52 (  0.00%)    38284.45 ( 11.19%)
Hmean    unlink1-processes-30     34813.26 (  0.00%)    37975.17 (  9.08%)
Hmean    unlink1-processes-48     37048.90 (  0.00%)    39862.78 (  7.59%)
Hmean    unlink1-processes-79     35630.01 (  0.00%)    36855.30 (  3.44%)
Hmean    unlink1-processes-110    36115.85 (  0.00%)    39843.91 ( 10.32%)
Hmean    unlink1-processes-141    32546.96 (  0.00%)    35418.52 (  8.82%)
Hmean    unlink1-processes-172    34674.79 (  0.00%)    36899.21 (  6.42%)
Hmean    unlink1-processes-203    37303.11 (  0.00%)    36393.04 ( -2.44%)
Hmean    unlink1-processes-224    35712.13 (  0.00%)    36685.96 (  2.73%)

== 2. ppc64le ==

Avg runtime set_task_state():  938 msecs
Avg runtime set_current_state: 940 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      19269.19 (  0.00%)    30704.50 ( 59.35%)
Hmean    unlink1-processes-5      20106.15 (  0.00%)    21804.15 (  8.45%)
Hmean    unlink1-processes-8      17496.97 (  0.00%)    17243.28 ( -1.45%)
Hmean    unlink1-processes-12     14224.15 (  0.00%)    17240.21 ( 21.20%)
Hmean    unlink1-processes-21     14155.66 (  0.00%)    15681.23 ( 10.78%)
Hmean    unlink1-processes-30     14450.70 (  0.00%)    15995.83 ( 10.69%)
Hmean    unlink1-processes-48     16945.57 (  0.00%)    16370.42 ( -3.39%)
Hmean    unlink1-processes-79     15788.39 (  0.00%)    14639.27 ( -7.28%)
Hmean    unlink1-processes-110    14268.48 (  0.00%)    14377.40 (  0.76%)
Hmean    unlink1-processes-141    14023.65 (  0.00%)    16271.69 ( 16.03%)
Hmean    unlink1-processes-172    13417.62 (  0.00%)    16067.55 ( 19.75%)
Hmean    unlink1-processes-203    15293.08 (  0.00%)    15440.40 (  0.96%)
Hmean    unlink1-processes-234    13719.32 (  0.00%)    16190.74 ( 18.01%)
Hmean    unlink1-processes-265    16400.97 (  0.00%)    16115.22 ( -1.74%)
Hmean    unlink1-processes-296    14388.60 (  0.00%)    16216.13 ( 12.70%)
Hmean    unlink1-processes-320    15771.85 (  0.00%)    15905.96 (  0.85%)

x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching)
and ppc64 (with paca) show similar improvements in the unlink microbenches.
The small delta for ppc64 (2ms), does not represent the gains on the unlink
runs. In the case of x86, there was a decent amount of variation in the
latency runs, but always within a 20 to 50ms increase), ppc was more constant.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: mark.rutland@arm.com
Link: http://lkml.kernel.org/r/1483479794-14013-5-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch effectively replaces the tsk pointer dereference
(which is obviously == current), to directly use get_current()
macro. This is to make the removal of setting foreign task
states smoother and painfully obvious. Performance win on some
archs such as x86-64 and ppc64. On a microbenchmark that calls
set_task_state() vs set_current_state() and an inode rwsem
pounding benchmark doing unlink:

== 1. x86-64 ==

Avg runtime set_task_state():    601 msecs
Avg runtime set_current_state(): 552 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      36089.26 (  0.00%)    38977.33 (  8.00%)
Hmean    unlink1-processes-5      28555.01 (  0.00%)    29832.55 (  4.28%)
Hmean    unlink1-processes-8      37323.75 (  0.00%)    44974.57 ( 20.50%)
Hmean    unlink1-processes-12     43571.88 (  0.00%)    44283.01 (  1.63%)
Hmean    unlink1-processes-21     34431.52 (  0.00%)    38284.45 ( 11.19%)
Hmean    unlink1-processes-30     34813.26 (  0.00%)    37975.17 (  9.08%)
Hmean    unlink1-processes-48     37048.90 (  0.00%)    39862.78 (  7.59%)
Hmean    unlink1-processes-79     35630.01 (  0.00%)    36855.30 (  3.44%)
Hmean    unlink1-processes-110    36115.85 (  0.00%)    39843.91 ( 10.32%)
Hmean    unlink1-processes-141    32546.96 (  0.00%)    35418.52 (  8.82%)
Hmean    unlink1-processes-172    34674.79 (  0.00%)    36899.21 (  6.42%)
Hmean    unlink1-processes-203    37303.11 (  0.00%)    36393.04 ( -2.44%)
Hmean    unlink1-processes-224    35712.13 (  0.00%)    36685.96 (  2.73%)

== 2. ppc64le ==

Avg runtime set_task_state():  938 msecs
Avg runtime set_current_state: 940 msecs

                                            vanilla                 dirty
Hmean    unlink1-processes-2      19269.19 (  0.00%)    30704.50 ( 59.35%)
Hmean    unlink1-processes-5      20106.15 (  0.00%)    21804.15 (  8.45%)
Hmean    unlink1-processes-8      17496.97 (  0.00%)    17243.28 ( -1.45%)
Hmean    unlink1-processes-12     14224.15 (  0.00%)    17240.21 ( 21.20%)
Hmean    unlink1-processes-21     14155.66 (  0.00%)    15681.23 ( 10.78%)
Hmean    unlink1-processes-30     14450.70 (  0.00%)    15995.83 ( 10.69%)
Hmean    unlink1-processes-48     16945.57 (  0.00%)    16370.42 ( -3.39%)
Hmean    unlink1-processes-79     15788.39 (  0.00%)    14639.27 ( -7.28%)
Hmean    unlink1-processes-110    14268.48 (  0.00%)    14377.40 (  0.76%)
Hmean    unlink1-processes-141    14023.65 (  0.00%)    16271.69 ( 16.03%)
Hmean    unlink1-processes-172    13417.62 (  0.00%)    16067.55 ( 19.75%)
Hmean    unlink1-processes-203    15293.08 (  0.00%)    15440.40 (  0.96%)
Hmean    unlink1-processes-234    13719.32 (  0.00%)    16190.74 ( 18.01%)
Hmean    unlink1-processes-265    16400.97 (  0.00%)    16115.22 ( -1.74%)
Hmean    unlink1-processes-296    14388.60 (  0.00%)    16216.13 ( 12.70%)
Hmean    unlink1-processes-320    15771.85 (  0.00%)    15905.96 (  0.85%)
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: mark.rutland@arm.com
Link: http://lkml.kernel.org/r/1483479794-14013-4-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

If prev node is not in running state or its vCPU is preempted, we can give
up our vCPU slices in pv_wait_node() ASAP.
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: longman@redhat.com
Link: http://lkml.kernel.org/r/1484035006-6787-1-git-send-email-xinhui.pan@linux.vnet.ibm.com
[ Fixed typos in the changelog, removed ugly linebreak from the code. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The spin_lock_bh_nested() API is defined but is not used anywhere
in the kernel. So all spin_lock_bh_nested() and related APIs are
now removed.
Signed-off-by: NWaiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1483975612-16447-1-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since commit:

  4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines")

printk() requires KERN_CONT to continue log messages. Lots of printk()
in lockdep.c and print_ip_sym() don't have it. As the result lockdep
reports are completely messed up.

Add missing KERN_CONT and inline print_ip_sym() where necessary.

Example of a messed up report:

  0-rc5+ #41 Not tainted
  -------------------------------------------------------
  syz-executor0/5036 is trying to acquire lock:
   (
  rtnl_mutex
  ){+.+.+.}
  , at:
  [<ffffffff86b3d6ac>] rtnl_lock+0x1c/0x20
  but task is already holding lock:
   (
  &net->packet.sklist_lock
  ){+.+...}
  , at:
  [<ffffffff873541a6>] packet_diag_dump+0x1a6/0x1920
  which lock already depends on the new lock.
  the existing dependency chain (in reverse order) is:
  -> #3
   (
  &net->packet.sklist_lock
  +.+...}
  ...

Without this patch all scripts that parse kernel bug reports are broken.
Signed-off-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andreyknvl@google.com
Cc: aryabinin@virtuozzo.com
Cc: joe@perches.com
Cc: syzkaller@googlegroups.com
Link: http://lkml.kernel.org/r/1480343083-48731-1-git-send-email-dvyukov@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

While debugging the unlock vs. dequeue race which resulted in state
corruption of futexes the lockless nature of rt_mutex_proxy_unlock()
caused some confusion.

Add commentry to explain why it is safe to do this lockless. Add matching
comments to rt_mutex_init_proxy_locked() for completeness sake.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130210030.591941927@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

This is a left over from the original rtmutex implementation which used
both bit0 and bit1 in the owner pointer. Commit:

  8161239a ("rtmutex: Simplify PI algorithm and make highest prio task get lock")

... removed the usage of bit1, but kept the extra mask around. This is
confusing at best.

Remove it and just use RT_MUTEX_HAS_WAITERS for the masking.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130210030.509567906@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

While debugging the rtmutex unlock vs. dequeue race Will suggested to use
READ_ONCE() in rt_mutex_owner() as it might race against the
cmpxchg_release() in unlock_rt_mutex_safe().

Will: "It's a minor thing which will most likely not matter in practice"

Careful search did not unearth an actual problem in todays code, but it's
better to be safe than surprised.
Suggested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20161130210030.431379999@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

David reported a futex/rtmutex state corruption. It's caused by the
following problem:

CPU0		CPU1		CPU2

l->owner=T1
		rt_mutex_lock(l)
		lock(l->wait_lock)
		l->owner = T1 | HAS_WAITERS;
		enqueue(T2)
		boost()
		  unlock(l->wait_lock)
		schedule()

				rt_mutex_lock(l)
				lock(l->wait_lock)
				l->owner = T1 | HAS_WAITERS;
				enqueue(T3)
				boost()
				  unlock(l->wait_lock)
				schedule()
		signal(->T2)	signal(->T3)
		lock(l->wait_lock)
		dequeue(T2)
		deboost()
		  unlock(l->wait_lock)
				lock(l->wait_lock)
				dequeue(T3)
				  ===> wait list is now empty
				deboost()
				 unlock(l->wait_lock)
		lock(l->wait_lock)
		fixup_rt_mutex_waiters()
		  if (wait_list_empty(l)) {
		    owner = l->owner & ~HAS_WAITERS;
		    l->owner = owner
		     ==> l->owner = T1
		  }

				lock(l->wait_lock)
rt_mutex_unlock(l)		fixup_rt_mutex_waiters()
				  if (wait_list_empty(l)) {
				    owner = l->owner & ~HAS_WAITERS;
cmpxchg(l->owner, T1, NULL)
 ===> Success (l->owner = NULL)
				    l->owner = owner
				     ==> l->owner = T1
				  }

That means the problem is caused by fixup_rt_mutex_waiters() which does the
RMW to clear the waiters bit unconditionally when there are no waiters in
the rtmutexes rbtree.

This can be fatal: A concurrent unlock can release the rtmutex in the
fastpath because the waiters bit is not set. If the cmpxchg() gets in the
middle of the RMW operation then the previous owner, which just unlocked
the rtmutex is set as the owner again when the write takes place after the
successfull cmpxchg().

The solution is rather trivial: verify that the owner member of the rtmutex
has the waiters bit set before clearing it. This does not require a
cmpxchg() or other atomic operations because the waiters bit can only be
set and cleared with the rtmutex wait_lock held. It's also safe against the
fast path unlock attempt. The unlock attempt via cmpxchg() will either see
the bit set and take the slowpath or see the bit cleared and release it
atomically in the fastpath.

It's remarkable that the test program provided by David triggers on ARM64
and MIPS64 really quick, but it refuses to reproduce on x86-64, while the
problem exists there as well. That refusal might explain that this got not
discovered earlier despite the bug existing from day one of the rtmutex
implementation more than 10 years ago.

Thanks to David for meticulously instrumenting the code and providing the
information which allowed to decode this subtle problem.
Reported-by: NDavid Daney <ddaney@caviumnetworks.com>
Tested-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Fixes: 23f78d4a ("[PATCH] pi-futex: rt mutex core")
Link: http://lkml.kernel.org/r/20161130210030.351136722@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Christoph requested lockdep_assert_held() variants that distinguish
between held-for-read or held-for-write.

Provide:

  int lock_is_held_type(struct lockdep_map *lock, int read)

which takes the same argument as lock_acquire(.read) and matches it to
the held_lock instance.

Use of this function should be gated by the debug_locks variable. When
that is 0 the return value of the lock_is_held_type() function is
undefined. This is done to allow both negative and positive tests for
holding locks.

By default we provide (positive) lockdep_assert_held{,_exclusive,_read}()
macros.
Requested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

locking/mutex: Break out of expensive busy-loop on {mutex,rwsem}_spin_on_owner() when owner vCPU is preempted

An over-committed guest with more vCPUs than pCPUs has a heavy overload
in the two spin_on_owner. This blames on the lock holder preemption
issue.

Break out of the loop if the vCPU is preempted: if vcpu_is_preempted(cpu)
is true.

test-case:
perf record -a perf bench sched messaging -g 400 -p && perf report

before patch:
20.68%  sched-messaging  [kernel.vmlinux]  [k] mutex_spin_on_owner
 8.45%  sched-messaging  [kernel.vmlinux]  [k] mutex_unlock
 4.12%  sched-messaging  [kernel.vmlinux]  [k] system_call
 3.01%  sched-messaging  [kernel.vmlinux]  [k] system_call_common
 2.83%  sched-messaging  [kernel.vmlinux]  [k] copypage_power7
 2.64%  sched-messaging  [kernel.vmlinux]  [k] rwsem_spin_on_owner
 2.00%  sched-messaging  [kernel.vmlinux]  [k] osq_lock

after patch:
 9.99%  sched-messaging  [kernel.vmlinux]  [k] mutex_unlock
 5.28%  sched-messaging  [unknown]         [H] 0xc0000000000768e0
 4.27%  sched-messaging  [kernel.vmlinux]  [k] __copy_tofrom_user_power7
 3.77%  sched-messaging  [kernel.vmlinux]  [k] copypage_power7
 3.24%  sched-messaging  [kernel.vmlinux]  [k] _raw_write_lock_irq
 3.02%  sched-messaging  [kernel.vmlinux]  [k] system_call
 2.69%  sched-messaging  [kernel.vmlinux]  [k] wait_consider_task
Tested-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: benh@kernel.crashing.org
Cc: boqun.feng@gmail.com
Cc: bsingharora@gmail.com
Cc: dave@stgolabs.net
Cc: kernellwp@gmail.com
Cc: konrad.wilk@oracle.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au
Cc: paulmck@linux.vnet.ibm.com
Cc: paulus@samba.org
Cc: rkrcmar@redhat.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: xen-devel-request@lists.xenproject.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1478077718-37424-4-git-send-email-xinhui.pan@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

An over-committed guest with more vCPUs than pCPUs has a heavy overload
in osq_lock().

This is because if vCPU-A holds the osq lock and yields out, vCPU-B ends
up waiting for per_cpu node->locked to be set. IOW, vCPU-B waits for
vCPU-A to run and unlock the osq lock.

Use the new vcpu_is_preempted(cpu) interface to detect if a vCPU is
currently running or not, and break out of the spin-loop if so.

test case:

 $ perf record -a perf bench sched messaging -g 400 -p && perf report

 before patch:
 18.09%  sched-messaging  [kernel.vmlinux]  [k] osq_lock
 12.28%  sched-messaging  [kernel.vmlinux]  [k] rwsem_spin_on_owner
  5.27%  sched-messaging  [kernel.vmlinux]  [k] mutex_unlock
  3.89%  sched-messaging  [kernel.vmlinux]  [k] wait_consider_task
  3.64%  sched-messaging  [kernel.vmlinux]  [k] _raw_write_lock_irq
  3.41%  sched-messaging  [kernel.vmlinux]  [k] mutex_spin_on_owner.is
  2.49%  sched-messaging  [kernel.vmlinux]  [k] system_call

 after patch:
 20.68%  sched-messaging  [kernel.vmlinux]  [k] mutex_spin_on_owner
  8.45%  sched-messaging  [kernel.vmlinux]  [k] mutex_unlock
  4.12%  sched-messaging  [kernel.vmlinux]  [k] system_call
  3.01%  sched-messaging  [kernel.vmlinux]  [k] system_call_common
  2.83%  sched-messaging  [kernel.vmlinux]  [k] copypage_power7
  2.64%  sched-messaging  [kernel.vmlinux]  [k] rwsem_spin_on_owner
  2.00%  sched-messaging  [kernel.vmlinux]  [k] osq_lock
Suggested-by: NBoqun Feng <boqun.feng@gmail.com>
Tested-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: benh@kernel.crashing.org
Cc: bsingharora@gmail.com
Cc: dave@stgolabs.net
Cc: kernellwp@gmail.com
Cc: konrad.wilk@oracle.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au
Cc: paulmck@linux.vnet.ibm.com
Cc: paulus@samba.org
Cc: rkrcmar@redhat.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: xen-devel-request@lists.xenproject.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1478077718-37424-3-git-send-email-xinhui.pan@linux.vnet.ibm.com
[ Translated to English. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Currently the wake_q data structure is defined by the WAKE_Q() macro.
This macro, however, looks like a function doing something as "wake" is
a verb. Even checkpatch.pl was confused as it reported warnings like

  WARNING: Missing a blank line after declarations
  #548: FILE: kernel/futex.c:3665:
  +	int ret;
  +	WAKE_Q(wake_q);

This patch renames the WAKE_Q() macro to DEFINE_WAKE_Q() which clarifies
what the macro is doing and eliminates the checkpatch.pl warnings.
Signed-off-by: NWaiman Long <longman@redhat.com>
Acked-by: NDavidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479401198-1765-1-git-send-email-longman@redhat.com
[ Resolved conflict and added missing rename. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Reduce the size of data structure for lockdep entries by half if
PROVE_LOCKING_SMALL if defined. This is used only for sparc.
Signed-off-by: NBabu Moger <babu.moger@oracle.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the s390 special case of a yielding cpu_relax() implementation gone,
we can now remove all users of cpu_relax_lowlatency() and replace them
with cpu_relax().
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1477386195-32736-5-git-send-email-borntraeger@de.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The 'class' parameter is not used, remove it.
n
Signed-off-by: NTahsin Erdogan <tahsin@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1478592127-4376-1-git-send-email-tahsin@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch makes the waiter that sets the HANDOFF flag start spinning
instead of sleeping until the handoff is complete or the owner
sleeps. Otherwise, the handoff will cause the optimistic spinners to
abort spinning as the handed-off owner may not be running.
Tested-by: NJason Low <jason.low2@hpe.com>
Signed-off-by: NWaiman Long <Waiman.Long@hpe.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Link: http://lkml.kernel.org/r/1472254509-27508-2-git-send-email-Waiman.Long@hpe.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch removes some of the redundant ww_mutex code in
__mutex_lock_common().
Tested-by: NJason Low <jason.low2@hpe.com>
Signed-off-by: NWaiman Long <Waiman.Long@hpe.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ding Tianhong <dingtianhong@huawei.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <Will.Deacon@arm.com>
Link: http://lkml.kernel.org/r/1472254509-27508-1-git-send-email-Waiman.Long@hpe.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Doesn't really matter yet, but pull the HANDOFF and trylock out from
under the wait_lock.

The intention is to add an optimistic spin loop here, which requires
we do not hold the wait_lock, so shuffle code around in preparation.

Also clarify the purpose of taking the wait_lock in the wait loop, its
tempting to want to avoid it altogether, but the cancellation cases
need to to avoid losing wakeups.
Suggested-by: NWaiman Long <waiman.long@hpe.com>
Tested-by: NJason Low <jason.low2@hpe.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Implement lock handoff to avoid lock starvation.

Lock starvation is possible because mutex_lock() allows lock stealing,
where a running (or optimistic spinning) task beats the woken waiter
to the acquire.

Lock stealing is an important performance optimization because waiting
for a waiter to wake up and get runtime can take a significant time,
during which everyboy would stall on the lock.

The down-side is of course that it allows for starvation.

This patch has the waiter requesting a handoff if it fails to acquire
the lock upon waking. This re-introduces some of the wait time,
because once we do a handoff we have to wait for the waiter to wake up
again.

A future patch will add a round of optimistic spinning to attempt to
alleviate this penalty, but if that turns out to not be enough, we can
add a counter and only request handoff after multiple failed wakeups.

There are a few tricky implementation details:

 - accepting a handoff must only be done in the wait-loop. Since the
   handoff condition is owner == current, it can easily cause
   recursive locking trouble.

 - accepting the handoff must be careful to provide the ACQUIRE
   semantics.

 - having the HANDOFF bit set on unlock requires care, we must not
   clear the owner.

 - we must be careful to not leave HANDOFF set after we've acquired
   the lock. The tricky scenario is setting the HANDOFF bit on an
   unlocked mutex.
Tested-by: NJason Low <jason.low2@hpe.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NWaiman Long <Waiman.Long@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The current mutex implementation has an atomic lock word and a
non-atomic owner field.

This disparity leads to a number of issues with the current mutex code
as it means that we can have a locked mutex without an explicit owner
(because the owner field has not been set, or already cleared).

This leads to a number of weird corner cases, esp. between the
optimistic spinning and debug code. Where the optimistic spinning
code needs the owner field updated inside the lock region, the debug
code is more relaxed because the whole lock is serialized by the
wait_lock.

Also, the spinning code itself has a few corner cases where we need to
deal with a held lock without an owner field.

Furthermore, it becomes even more of a problem when trying to fix
starvation cases in the current code. We end up stacking special case
on special case.

To solve this rework the basic mutex implementation to be a single
atomic word that contains the owner and uses the low bits for extra
state.

This matches how PI futexes and rt_mutex already work. By having the
owner an integral part of the lock state a lot of the problems
dissapear and we get a better option to deal with starvation cases,
direct owner handoff.

Changing the basic mutex does however invalidate all the arch specific
mutex code; this patch leaves that unused in-place, a later patch will
remove that.
Tested-by: NJason Low <jason.low2@hpe.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NWill Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It is now unused, remove it before someone else thinks its a good idea
to use this.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

stop_two_cpus() and stop_cpus() use stop_cpus_lock to avoid the deadlock,
we need to ensure that the stopper functions can't be queued "backwards"
from one another. This doesn't look nice; if we use lglock then we do not
really need stopper->lock, cpu_stop_queue_work() could use lg_local_lock()
under local_irq_save().

OTOH it would be even better to avoid lglock in stop_machine.c and remove
lg_double_lock(). This patch adds "bool stop_cpus_in_progress" set/cleared
by queue_stop_cpus_work(), and changes cpu_stop_queue_two_works() to busy
wait until it is cleared.

queue_stop_cpus_work() sets stop_cpus_in_progress = T lockless, but after
it queues a work on CPU1 it must be visible to stop_two_cpus(CPU1, CPU2)
which checks it under the same lock. And since stop_two_cpus() holds the
2nd lock too, queue_stop_cpus_work() can not clear stop_cpus_in_progress
if it is also going to queue a work on CPU2, it needs to take that 2nd
lock to do this.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20151121181148.GA433@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

cmpxchg_release() is more lighweight than cmpxchg() on some archs(e.g.
PPC), moreover, in __pv_queued_spin_unlock() we only needs a RELEASE in
the fast path(pairing with *_try_lock() or *_lock()). And the slow path
has smp_store_release too. So it's safe to use cmpxchg_release here.
Suggested-by: NBoqun Feng <boqun.feng@gmail.com>
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au
Cc: paulmck@linux.vnet.ibm.com
Cc: paulus@samba.org
Cc: virtualization@lists.linux-foundation.org
Cc: waiman.long@hpe.com
Link: http://lkml.kernel.org/r/1474277037-15200-2-git-send-email-xinhui.pan@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When wanting to wakeup readers, __rwsem_mark_wakeup() currently
iterates the wait_list twice while looking to wakeup the first N
queued reader-tasks. While this can be quite inefficient, it was
there such that a awoken reader would be first and foremost
acknowledged by the lock counter.

Keeping the same logic, we can further benefit from the use of
wake_qs and avoid entirely the first wait_list iteration that sets
the counter as wake_up_process() isn't going to occur right away,
and therefore we maintain the counter->list order of going about
things.

Other than saving cycles with O(n) "scanning", this change also
nicely cleans up a good chunk of __rwsem_mark_wakeup(); both
visually and less tedious to read.

For example, the following improvements where seen on some will
it scale microbenchmarks, on a 48-core Haswell:

                                       v4.7              v4.7-rwsem-v1
  Hmean    signal1-processes-8    5792691.42 (  0.00%)  5771971.04 ( -0.36%)
  Hmean    signal1-processes-12   6081199.96 (  0.00%)  6072174.38 ( -0.15%)
  Hmean    signal1-processes-21   3071137.71 (  0.00%)  3041336.72 ( -0.97%)
  Hmean    signal1-processes-48   3712039.98 (  0.00%)  3708113.59 ( -0.11%)
  Hmean    signal1-processes-79   4464573.45 (  0.00%)  4682798.66 (  4.89%)
  Hmean    signal1-processes-110  4486842.01 (  0.00%)  4633781.71 (  3.27%)
  Hmean    signal1-processes-141  4611816.83 (  0.00%)  4692725.38 (  1.75%)
  Hmean    signal1-processes-172  4638157.05 (  0.00%)  4714387.86 (  1.64%)
  Hmean    signal1-processes-203  4465077.80 (  0.00%)  4690348.07 (  5.05%)
  Hmean    signal1-processes-224  4410433.74 (  0.00%)  4687534.43 (  6.28%)

  Stddev   signal1-processes-8       6360.47 (  0.00%)     8455.31 ( 32.94%)
  Stddev   signal1-processes-12      4004.98 (  0.00%)     9156.13 (128.62%)
  Stddev   signal1-processes-21      3273.14 (  0.00%)     5016.80 ( 53.27%)
  Stddev   signal1-processes-48     28420.25 (  0.00%)    26576.22 ( -6.49%)
  Stddev   signal1-processes-79     22038.34 (  0.00%)    18992.70 (-13.82%)
  Stddev   signal1-processes-110    23226.93 (  0.00%)    17245.79 (-25.75%)
  Stddev   signal1-processes-141     6358.98 (  0.00%)     7636.14 ( 20.08%)
  Stddev   signal1-processes-172     9523.70 (  0.00%)     4824.75 (-49.34%)
  Stddev   signal1-processes-203    13915.33 (  0.00%)     9326.33 (-32.98%)
  Stddev   signal1-processes-224    15573.94 (  0.00%)    10613.82 (-31.85%)

Other runs that saw improvements include context_switch and pipe; and
as expected, this is particularly highlighted on larger thread counts
as it becomes more expensive to walk the list twice.

No change in wakeup ordering or semantics.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: dave@stgolabs.net
Cc: jason.low2@hpe.com
Cc: wanpeng.li@hotmail.com
Link: http://lkml.kernel.org/r/1470384285-32163-4-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Our rwsem code (xadd, at least) is rather well documented, but
there are a few really annoying comments in there that serve
no purpose and we shouldn't bother with them.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: dave@stgolabs.net
Cc: jason.low2@hpe.com
Cc: wanpeng.li@hotmail.com
Link: http://lkml.kernel.org/r/1470384285-32163-3-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

We currently return a rw_semaphore structure, which is the
same lock we passed to the function's argument in the first
place. While there are several functions that choose this
return value, the callers use it, for example, for things
like ERR_PTR. This is not the case for __rwsem_mark_wake(),
and in addition this function is really about the lock
waiters (which we know there are at this point), so its
somewhat odd to be returning the sem structure.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hp.com
Cc: dave@stgolabs.net
Cc: jason.low2@hpe.com
Cc: wanpeng.li@hotmail.com
Link: http://lkml.kernel.org/r/1470384285-32163-2-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently the percpu-rwsem switches to (global) atomic ops while a
writer is waiting; which could be quite a while and slows down
releasing the readers.

This patch cures this problem by ordering the reader-state vs
reader-count (see the comments in __percpu_down_read() and
percpu_down_write()). This changes a global atomic op into a full
memory barrier, which doesn't have the global cacheline contention.

This also enables using the percpu-rwsem with rcu_sync disabled in order
to bias the implementation differently, reducing the writer latency by
adding some cost to readers.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NOleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
[ Fixed modular build. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Currently there are overlap in the pvqspinlock wait_again and
spurious_wakeup stat counters. Because of lock stealing, it is
no longer possible to accurately determine if spurious wakeup has
happened in the queue head.  As they track both the queue node and
queue head status, it is also hard to tell how many of those comes
from the queue head and how many from the queue node.

This patch changes the accounting rules so that spurious wakeup is
only tracked in the queue node. The wait_again count, however, is
only tracked in the queue head when the vCPU failed to acquire the
lock after a vCPU kick. This should give a much better indication of
the wait-kick dynamics in the queue node and the queue head.
Signed-off-by: NWaiman Long <Waiman.Long@hpe.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pan Xinhui <xinhui@linux.vnet.ibm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1464713631-1066-2-git-send-email-Waiman.Long@hpe.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Restructure pv_queued_spin_steal_lock() as I found it hard to read.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <waiman.long@hpe.com
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

It's obviously wrong to set stat to NULL. So lets remove it.
Otherwise it is always zero when we check the latency of kick/wake.
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NWaiman Long <Waiman.Long@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1468405414-3700-1-git-send-email-xinhui.pan@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When the lock holder vCPU is racing with the queue head:

   CPU 0 (lock holder)    CPU1 (queue head)
   ===================    =================
   spin_lock();           spin_lock();
    pv_kick_node():        pv_wait_head_or_lock():
                            if (!lp) {
                             lp = pv_hash(lock, pn);
                             xchg(&l->locked, _Q_SLOW_VAL);
                            }
                            WRITE_ONCE(pn->state, vcpu_halted);
     cmpxchg(&pn->state,
      vcpu_halted, vcpu_hashed);
     WRITE_ONCE(l->locked, _Q_SLOW_VAL);
     (void)pv_hash(lock, pn);

In this case, lock holder inserts the pv_node of queue head into the
hash table and set _Q_SLOW_VAL unnecessary. This patch avoids it by
restoring/setting vcpu_hashed state after failing adaptive locking
spinning.
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/1468484156-4521-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

queued_spin_lock_slowpath() should not worry about another
queued_spin_lock_slowpath() running in interrupt context and
changing node->count by accident, because node->count keeps
the same value every time we enter/leave queued_spin_lock_slowpath().

On some architectures this_cpu_dec() will save/restore irq flags,
which has high overhead. Use the much cheaper __this_cpu_dec() instead.
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman.Long@hpe.com
Link: http://lkml.kernel.org/r/1465886247-3773-1-git-send-email-xinhui.pan@linux.vnet.ibm.com
[ Rewrote changelog. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>