- 21 6月, 2007 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix powermac late initcall to only run on powermac [POWERPC] PowerPC: Prevent data exception in kernel space (32-bit)
-
由 Li Yang 提交于
Reorder my CREDIT entry to make it in alphabetic order by last name. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
WARNING: arch/x86_64/kernel/built-in.o(.text+0xace9): Section mismatch: reference to .init.text: (between 'get_mtrr_state' and 'mtrr_wrmsr') WARNING: arch/x86_64/kernel/built-in.o(.text+0xad09): Section mismatch: reference to .init.text: (between 'get_mtrr_state' and 'mtrr_wrmsr') WARNING: arch/x86_64/kernel/built-in.o(.text+0xad38): Section mismatch: reference to .init.text: (between 'get_mtrr_state' and 'mtrr_wrmsr') WARNING: drivers/built-in.o(.text+0x3a680): Section mismatch: reference to .init.text:acpi_map_pxm_to_node (between 'acpi_get_node' and 'acpi_lock_ac_dir') AK: also marked mtrr_bp_init __init to avoid some more warnings Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
- Disable CLFLUSH again; it is still broken. Always do WBINVD. - Always flush in the i386 case, not only when there are deferred pages. These are both brute-force inefficient fixes, to be improved next release cycle. The changes to i386 are a little more extensive than strictly needed (some dead code added), but it is more similar to the x86-64 version now and the dead code will be used soon. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Right now Kprobes cannot write to the write protected kernel text when DEBUG_RODATA is enabled. Disallow this in Kconfig for now. Temporary fix for 2.6.22. In .23 add code to temporarily unprotect it. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
It's already annoying that they appear on x86 now -- that's for the 3button emulation needed on x86 macs -- but at least don't make them default. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Not directly related to x86, but I got tired of seeing these warnings on every kconfig update when building on a non m68k box: drivers/input/keyboard/Kconfig:170:warning: 'select' used by config symbol 'KEYBOARD_ATARI' refers to undefined symbol 'ATARI_KBD_CORE' drivers/input/mouse/Kconfig:182:warning: 'select' used by config symbol 'MOUSE_ATARI' refers to undefined symbol 'ATARI_KBD_CORE' I moved the definition of ATARI_KBD_CORE into drivers/input/keyboard/Kconfig so it's always seen by Kconfig. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Several reports that VIA bridges don't support DAC and corrupt data. I don't know if it's fixed, but let's just blacklist them all for now. It can be overwritten with iommu=usedac Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
They had the same syscall number. Pointed out by Davide Libenzi Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Correctly convert the u64 arguments from 32bit to 64bit. Pointed out by Heiko Carstens. I guess this proves Linus' theory that nobody uses the more exotic Linux specific syscalls. It wasn't discovered by a user. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 6月, 2007 3 次提交
-
-
由 Tony Breeds 提交于
Current ppc64_defconfig kernel fails to boot on iSeries, dying with: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc00000000071b258 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 iSeries <snip> NIP [c00000000071b258] .iSeries_src_init+0x34/0x64 LR [c000000000701bb4] .kernel_init+0x1fc/0x3bc Call Trace: [c000000007d0be30] [0000000000008000] 0x8000 (unreliable) [c000000007d0bea0] [c000000000701bb4] .kernel_init+0x1fc/0x3bc [c000000007d0bf90] [c0000000000262d4] .kernel_thread+0x4c/0x68 Instruction dump: e922cba8 3880ffff 78840420 f8010010 f821ff91 60000000 e8090000 78095fe3 4182002c e922cb58 e862cbb0 e9290140 <e8090000> f8410028 7c0903a6 e9690010 Kernel panic - not syncing: Attempted to kill init! This happens because some powermac code unconditionally sets ppc_md.progress to NULL. This patch makes sure the powermac late initcall is only run on powermac machines. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Segher Boessenkool 提交于
The "is_exec" branch of the protection check in do_page_fault() didn't do anything on 32-bit PowerPC. So if a userland program jumps to a page with Linux protection flags "---p", all the tests happily fall through, and handle_mm_fault() is called, which in turn calls handle_pte_fault(), which calls update_mmu_cache(), which goes flush the dcache to a page with no access rights. Boom. This fixes it. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Li Yang 提交于
The patch adds fragments caused by rh_alloc_align() back to free list, instead of allocating the whole chunk of memory. This will greatly improve memory utilization managed by rheap. It solves MURAM not enough problem with 3 UCCs enabled on MPC8323. Signed-off-by: NLi Yang <leoli@freescale.com> Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 19 6月, 2007 21 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Handle -ERESTART_RESTARTBLOCK for restartable syscalls.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Handle -ERESTART_RESTARTBLOCK for restartable syscalls. sh: oops_enter()/oops_exit() in die(). sh: Fix restartable syscall arg5 clobbering.
-
git://git390.osdl.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Move psw_set_key. [S390] Add oops_enter()/oops_exit() calls to die(). [S390] Print list of modules on die(). [S390] Fix yet another two section mismatches. [S390] Fix zfcpdump header [S390] Missing blank when appending cio_ignore kernel parameter
-
git://oss.sgi.com:8090/xfs/xfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Update the MAINTAINERS file entry for XFS - change git repo name. [XFS] s/memclear_highpage_flush/zero_user_page/ [XFS] Update the MAINTAINERS file entry for XFS.
-
由 Heiko Carstens 提交于
Move psw_set_key() from ptrace.h to processor.h which is a more suitable place for it. In addition the moves makes the function invisible to user space. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
This is mainly to switch off all potentially debugging stuff that won't report anything useful after an oops happened. Besided that setting pause_on_oops will work too, but doesn't make too much sense on s390. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Print list of modules on die() like a lot of other architectures do. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
WARNING: arch/s390/kernel/built-in.o(.text+0xb92a): Section mismatch: reference to .init.text:start_secondary (between 'restart_addr' and 'stack_overflow') WARNING: arch/s390/appldata/built-in.o(.data+0xdc): Section mismatch: reference to .init.text: (between 'appldata_nb' and 'appldata_timer_lock') Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Added members for volume number and real memory size to header information. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
When appending the 'cio_ignore' kernel parameter to the command line, a blank has to be inserted in order to separate 'cio_ignore' from the preceding kernel parameters. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Tim Shimmin 提交于
Make the git repository bare and so give it the conventional .git suffix. Signed-off-by: NTim Shimmin <tes@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 957103 SGI-Modid: xfs-linux-melb:xfs-kern:28678a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com>
-
-
由 Benjamin Herrenschmidt 提交于
The old snd-powermac driver has some serious refcounting issues when initialisation fails, which is the case on all new machines with a layout-id since those are handled by the new snd-aoa driver. Some of those bugs seem to have been under the radar for some time (like double pci_dev_put), but one was actually added in 2.6.22 with Stephen attempt at teaching refcounting to the driver which didn't do it at all. This patch fixes both, thus removing all sort of kref errors that would happen if that driver gets loaded on a G5 machine or a recent PowerBook due to OF nodes left around with a 0 refcount. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mundt 提交于
The current implementation only handles -ERESTARTNOHAND, whereas we also need to handle -ERESTART_RESTARTBLOCK in the handle_signal() case for restartable system calls. Follows the sh change. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The current implementation only handles -ERESTARTNOHAND, whereas we also need to handle -ERESTART_RESTARTBLOCK in the handle_signal() case for restartable system calls. As noted by Carl: This fixes the LTP test nanosleep03 - the current kernel causes -ERESTART_RESTARTBLOCK to reach user space rather than the correct -EINTR. Reported-by: NCarl Shaw <shaw.carl@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Linus Torvalds 提交于
Miklos Szeredi reported very long pauses (several seconds, sometimes more) on his T60 (with a Core2Duo) which he managed to track down to wait_task_inactive()'s open-coded busy-loop. He observed that an interrupt on one core tries to acquire the runqueue-lock but does not succeed in doing so for a very long time - while wait_task_inactive() on the other core loops waiting for the first core to deschedule a task (which it wont do while spinning in an interrupt handler). This rewrites wait_task_inactive() to do all its waiting optimistically without any locks taken at all, and then just double-check the end result with the proper runqueue lock held over just a very short section. If there were races in the optimistic wait, of a preemption event scheduled the process away, we simply re-synchronize, and start over. So the code now looks like this: repeat: /* Unlocked, optimistic looping! */ rq = task_rq(p); while (task_running(rq, p)) cpu_relax(); /* Get the *real* values */ rq = task_rq_lock(p, &flags); running = task_running(rq, p); array = p->array; task_rq_unlock(rq, &flags); /* Check them.. */ if (unlikely(running)) { cpu_relax(); goto repeat; } /* Preempted away? Yield if so.. */ if (unlikely(array)) { yield(); goto repeat; } Basically, that first "while()" loop is done entirely without any locking at all (and doesn't check for the case where the target process might have been preempted away), and so it's possibly "incorrect", but we don't really care. Both the runqueue used, and the "task_running()" check might be the wrong tests, but they won't oops - they just mean that we could possibly get the wrong results due to lack of locking and exit the loop early in the case of a race condition. So once we've exited the loop, we then get the proper (and careful) rq lock, and check the running/runnable state _safely_. And if it turns out that our quick-and-dirty and unsafe loop was wrong after all, we just go back and try it all again. (The patch also adds a lot of comments, which is the actual bulk of it all, to make it more obvious why we can do these things without holding the locks). Thanks to Miklos for all the testing and tracking it down. Tested-by: NMiklos Szeredi <miklos@szeredi.hu> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Gene Heskett reported the following problem while testing CFS: SysRq-N is not always effective in normalizing tasks back to SCHED_OTHER. The reason for that turns out to be the following bug: - normalize_rt_tasks() uses for_each_process() to iterate through all tasks in the system. The problem is, this method does not iterate through all tasks, it iterates through all thread groups. The proper mechanism to enumerate over all threads is to use a do_each_thread() + while_each_thread() loop. Reported-by: NGene Heskett <gene.heskett@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] ESP: Don't forget to clear ESP_FLAG_RESETTING. [SCSI] fusion: fix for BZ 8426 - massive slowdown on SCSI CD/DVD drive
-
由 Benjamin Herrenschmidt 提交于
Don't let signalfd dequeue private signals off other threads (in the case of things like SIGILL or SIGSEGV, trying to do so would result in undefined behaviour on who actually gets the signal, since they are force unblocked). Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NDavide Libenzi <davidel@xmailserver.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
This reverts commit d0aa7a70. It not only introduced user space visible changes to the futex syscall, it is also non-functional and there is no way to fix it proper before the 2.6.22 release. The breakage report ( http://lkml.org/lkml/2007/5/12/17 ) went unanswered, and unfortunately it turned out that the concept is not feasible at all. It violates the rtmutex semantics badly by introducing a virtual owner, which hacks around the coupling of the user-space pi_futex and the kernel internal rt_mutex representation. At the moment the only safe option is to remove it fully as it contains user-space visible changes to broken kernel code, which we do not want to expose in the 2.6.22 release. The patch reverts the original patch mostly 1:1, but contains a couple of trivial manual cleanups which were necessary due to patches, which touched the same area of code later. Verified against the glibc tests and my own PI futex tests. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NUlrich Drepper <drepper@redhat.com> Cc: Pierre Peiffer <pierre.peiffer@bull.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 6月, 2007 2 次提交
-
-
由 Paul Mundt 提交于
As Russell helpfully pointed out on linux-arch: http://marc.info/?l=linux-arch&m=118208089204630&w=2 We were missing the oops_enter/exit() in the sh die() implementation. As we do support lockdep, it's beneficial to add these calls so lockdep properly disables itself in the die() case. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kaz Kojima 提交于
We use R0 as the 5th argument of syscall. When the syscall restarts after signal handling, we should restore the old value of R0. The attached patch does it. Without this patch, I've experienced random failures in the situation which signals are issued frequently. Signed-off-by: NKaz Kojima <kkojima@rr.iij4u.or.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 17 6月, 2007 4 次提交
-
-
由 Linus Torvalds 提交于
The manatees, they are dancing! Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric W. Biederman 提交于
Some user space tools need to identify SYSV shared memory when examining /proc/<pid>/maps. To do so they look for a block device with major zero, a dentry named SYSV<sysv key>, and having the minor of the internal sysv shared memory kernel mount. To help these tools and to make it easier for people just browsing /proc/<pid>/maps this patch modifies hugetlb sysv shared memory to use the SYSV<key> dentry naming convention. User space tools will still have to be aware that hugetlb sysv shared memory lives on a different internal kernel mount and so has a different block device minor number from the rest of sysv shared memory. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Albert Cahalan <acahalan@gmail.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adam Litke 提交于
Here's another breakage as a result of shared memory stacked files :( The NUMA policy for a VMA is determined by checking the following (in the order given): 1) vma->vm_ops->get_policy() (if defined) 2) vma->vm_policy (if defined) 3) task->mempolicy (if defined) 4) Fall back to default_policy By switching to stacked files for shared memory, get_policy() is now always set to shm_get_policy which is a wrapper function. This causes us to stop at step 1, which yields NULL for hugetlb instead of task->mempolicy which was the previous (and correct) result. This patch modifies the shm_get_policy() wrapper to maintain steps 1-3 for the wrapped vm_ops. (akpm: the refcounting of mempolicies is busted and this patch does nothing to improve it) Signed-off-by: NAdam Litke <agl@us.ibm.com> Acked-by: NWilliam Irwin <bill.irwin@oracle.com> Cc: dean gaudet <dean@arctic.org> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
We have to take care that when we call udf_discard_prealloc() from udf_clear_inode() we have to write inode ourselves afterwards (otherwise, some changes might be lost leading to leakage of blocks, use of free blocks or improperly aligned extents). Also udf_discard_prealloc() does two different things - it removes preallocated blocks and truncates the last extent to exactly match i_size. We move the latter functionality to udf_truncate_tail_extent(), call udf_discard_prealloc() when last reference to a file is dropped and call udf_truncate_tail_extent() when inode is being removed from inode cache (udf_clear_inode() call). We cannot call udf_truncate_tail_extent() earlier as subsequent open+write would find the last block of the file mapped and happily write to the end of it, although the last extent says it's shorter. [akpm@linux-foundation.org: Make checkpatch.pl happier] Signed-off-by: NJan Kara <jack@suse.cz> Cc: Eric Sandeen <sandeen@sandeen.net> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-