- 14 1月, 2017 17 次提交
-
-
由 Nicolai Hähnle 提交于
Lock stealing is less beneficial for w/w mutexes since we may just end up backing off if we stole from a thread with an earlier acquire stamp that already holds another w/w mutex that we also need. So don't spin optimistically unless we are sure that there is no other waiter that might cause us to back off. Median timings taken of a contention-heavy GPU workload: Before: real 0m52.946s user 0m7.272s sys 1m55.964s After: real 0m53.086s user 0m7.360s sys 1m46.204s This particular workload still spends 20%-25% of CPU in mutex_spin_on_owner according to perf, but my attempts to further reduce this spinning based on various heuristics all lead to an increase in measured wall time despite the decrease in sys time. Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-11-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
In the following scenario, thread #1 should back off its attempt to lock ww1 and unlock ww2 (assuming the acquire context stamps are ordered accordingly). Thread #0 Thread #1 --------- --------- successfully lock ww2 set ww1->base.owner attempt to lock ww1 confirm ww1->ctx == NULL enter mutex_spin_on_owner set ww1->ctx What was likely to happen previously is: attempt to lock ww2 refuse to spin because ww2->ctx != NULL schedule() detect thread #0 is off CPU stop optimistic spin return -EDEADLK unlock ww2 wakeup thread #0 lock ww2 Now, we are more likely to see: detect ww1->ctx != NULL stop optimistic spin return -EDEADLK unlock ww2 successfully lock ww2 ... because thread #1 will stop its optimistic spin as soon as possible. The whole scenario is quite unlikely, since it requires thread #1 to get between thread #0 setting the owner and setting the ctx. But since we're idling here anyway, the additional check is basically free. Found by inspection. Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-10-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
Instead of inlining __mutex_lock_common() 5 times, once for each {state,ww} variant. Reduce this to two, ww and !ww. Then add __always_inline to mutex_optimistic_spin(), so that that will get inlined all 4 remaining times, for all {waiter,ww} variants. text data bss dec hex filename 6301 0 0 6301 189d defconfig-build/kernel/locking/mutex.o 4053 0 0 4053 fd5 defconfig-build/kernel/locking/mutex.o 4257 0 0 4257 10a1 defconfig-build/kernel/locking/mutex.o This reduces total text size and better separates the ww and !ww mutex code generation. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
locking/ww_mutex: Optimize ww-mutexes by waking at most one waiter for backoff when acquiring the lock The wait list is sorted by stamp order, and the only waiting task that may have to back off is the first waiter with a context. The regular slow path does not have to wake any other tasks at all, since all other waiters that would have to back off were either woken up when the waiter was added to the list, or detected the condition before they added themselves. Median timings taken of a contention-heavy GPU workload: Without this series: real 0m59.900s user 0m7.516s sys 2m16.076s With changes up to and including this patch: real 0m52.946s user 0m7.272s sys 1m55.964s Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-9-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
While adding our task as a waiter, detect if another task should back off because of us. With this patch, we establish the invariant that the wait list contains at most one (sleeping) waiter with ww_ctx->acquired > 0, and this waiter will be the first waiter with a context. Since only waiters with ww_ctx->acquired > 0 have to back off, this allows us to be much more economical with wakeups. Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-8-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
Add regular waiters in stamp order. Keep adding waiters that have no context in FIFO order and take care not to starve them. While adding our task as a waiter, back off if we detect that there is a waiter with a lower stamp in front of us. Make sure to call lock_contended even when we back off early. For w/w mutexes, being first in the wait list is only stable when taking the lock without a context. Therefore, the purpose of the first flag is split into two: 'first' remains to indicate whether we want to spin optimistically, while 'handoff' indicates that we should be prepared to accept a handoff. For w/w locking with a context, we always accept handoffs after the first schedule(), to handle the following sequence of events: 1. Task #0 unlocks and hands off to Task #2 which is first in line 2. Task #1 adds itself in front of Task #2 3. Task #2 wakes up and must accept the handoff even though it is no longer first in line Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: =?UTF-8?q?Nicolai=20H=C3=A4hnle?= <Nicolai.Haehnle@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-7-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
Keep the documentation in the header file since there is no good place for it in mutex.c: there are two rather different implementations with different EXPORT_SYMBOLs for each function. Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: =?UTF-8?q?Nicolai=20H=C3=A4hnle?= <Nicolai.Haehnle@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-6-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
We will add a new field to struct mutex_waiter. This field must be initialized for all waiters if any waiter uses the ww_use_ctx path. So there is a trade-off: Keep ww_mutex locking without a context on the faster non-use_ww_ctx path, at the cost of adding the initialization to all mutex locks (including non-ww_mutexes), or avoid the additional cost for non-ww_mutex locks, at the cost of adding additional checks to the use_ww_ctx path. We take the latter choice. It may be worth eliminating the users of ww_mutex_lock(lock, NULL), but there are a lot of them. Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-5-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolai Hähnle 提交于
The function will be re-used in subsequent patches. Signed-off-by: NNicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Link: http://lkml.kernel.org/r/1482346000-9927-4-git-send-email-nhaehnle@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Peter Zijlstra 提交于
While reviewing the ww_mutex patches, I noticed that it was still possible to (incorrectly) succeed for (incorrect) code like: mutex_lock(&a); mutex_lock(&a); This was possible if the second mutex_lock() would block (as expected) but then receive a spurious wakeup. At that point it would find itself at the front of the queue, request a handoff and instantly claim ownership and continue, since owner would point to itself. Avoid this scenario and simplify the code by introducing a third low bit to signal handoff pickup. So once we request handoff, unlock clears the handoff bit and sets the pickup bit along with the new owner. This also removes the need for the .handoff argument to __mutex_trylock(), since that becomes superfluous with PICKUP. In order to guarantee enough low bits, ensure task_struct alignment is at least L1_CACHE_BYTES (which seems a good ideal regardless). Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 9d659ae1 ("locking/mutex: Add lock handoff to avoid starvation") Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Davidlohr Bueso 提交于
The use of any kind of wait queue is an overkill for pcpu-rwsems. While one option would be to use the less heavy simple (swait) flavor, this is still too much for what pcpu-rwsems needs. For one, we do not care about any sort of queuing in that the only (rare) time writers (and readers, for that matter) are queued is when trying to acquire the regular contended rw_sem. There cannot be any further queuing as writers are serialized by the rw_sem in the first place. Given that percpu_down_write() must not be called after exit_notify(), we can replace the bulky waitqueue with rcuwait such that a writer can wait for its turn to take the lock. As such, we can avoid the queue handling and locking overhead. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NOleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1484148146-14210-3-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Davidlohr Bueso 提交于
rcuwait provides support for (single) RCU-safe task wait/wake functionality, with the caveat that it must not be called after exit_notify(), such that we avoid racing with rcu delayed_put_task_struct callbacks, task_struct being rcu unaware in this context -- for which we similarly have task_rcu_dereference() magic, but with different return semantics, which can conflict with the wakeup side. The interfaces are quite straightforward: rcuwait_wait_event() rcuwait_wake_up() More details are in the comments, but it's perhaps worth mentioning at least, that users must provide proper serialization when waiting on a condition, and avoid corrupting a concurrent waiter. Also care must be taken between the task and the condition for when calling the wakeup -- we cannot miss wakeups. When porting users, this is for example, a given when using waitqueues in that everything is done under the q->lock. As such, it can remove sources of non preemptable unbounded work for realtime. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: NOleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1484148146-14210-2-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Davidlohr Bueso 提交于
This is a nasty interface and setting the state of a foreign task must not be done. As of the following commit: be628be0 ("bcache: Make gc wakeup sane, remove set_task_state()") ... everyone in the kernel calls set_task_state() with current, allowing the helper to be removed. However, as the comment indicates, it is still around for those archs where computing current is more expensive than using a pointer, at least in theory. An important arch that is affected is arm64, however this has been addressed now [1] and performance is up to par making no difference with either calls. Of all the callers, if any, it's the locking bits that would care most about this -- ie: we end up passing a tsk pointer to a lot of the lock slowpath, and setting ->state on that. The following numbers are based on two tests: a custom ad-hoc microbenchmark that just measures latencies (for ~65 million calls) between get_task_state() vs get_current_state(). Secondly for a higher overview, an unlink microbenchmark was used, which pounds on a single file with open, close,unlink combos with increasing thread counts (up to 4x ncpus). While the workload is quite unrealistic, it does contend a lot on the inode mutex or now rwsem. [1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com == 1. x86-64 == Avg runtime set_task_state(): 601 msecs Avg runtime set_current_state(): 552 msecs vanilla dirty Hmean unlink1-processes-2 36089.26 ( 0.00%) 38977.33 ( 8.00%) Hmean unlink1-processes-5 28555.01 ( 0.00%) 29832.55 ( 4.28%) Hmean unlink1-processes-8 37323.75 ( 0.00%) 44974.57 ( 20.50%) Hmean unlink1-processes-12 43571.88 ( 0.00%) 44283.01 ( 1.63%) Hmean unlink1-processes-21 34431.52 ( 0.00%) 38284.45 ( 11.19%) Hmean unlink1-processes-30 34813.26 ( 0.00%) 37975.17 ( 9.08%) Hmean unlink1-processes-48 37048.90 ( 0.00%) 39862.78 ( 7.59%) Hmean unlink1-processes-79 35630.01 ( 0.00%) 36855.30 ( 3.44%) Hmean unlink1-processes-110 36115.85 ( 0.00%) 39843.91 ( 10.32%) Hmean unlink1-processes-141 32546.96 ( 0.00%) 35418.52 ( 8.82%) Hmean unlink1-processes-172 34674.79 ( 0.00%) 36899.21 ( 6.42%) Hmean unlink1-processes-203 37303.11 ( 0.00%) 36393.04 ( -2.44%) Hmean unlink1-processes-224 35712.13 ( 0.00%) 36685.96 ( 2.73%) == 2. ppc64le == Avg runtime set_task_state(): 938 msecs Avg runtime set_current_state: 940 msecs vanilla dirty Hmean unlink1-processes-2 19269.19 ( 0.00%) 30704.50 ( 59.35%) Hmean unlink1-processes-5 20106.15 ( 0.00%) 21804.15 ( 8.45%) Hmean unlink1-processes-8 17496.97 ( 0.00%) 17243.28 ( -1.45%) Hmean unlink1-processes-12 14224.15 ( 0.00%) 17240.21 ( 21.20%) Hmean unlink1-processes-21 14155.66 ( 0.00%) 15681.23 ( 10.78%) Hmean unlink1-processes-30 14450.70 ( 0.00%) 15995.83 ( 10.69%) Hmean unlink1-processes-48 16945.57 ( 0.00%) 16370.42 ( -3.39%) Hmean unlink1-processes-79 15788.39 ( 0.00%) 14639.27 ( -7.28%) Hmean unlink1-processes-110 14268.48 ( 0.00%) 14377.40 ( 0.76%) Hmean unlink1-processes-141 14023.65 ( 0.00%) 16271.69 ( 16.03%) Hmean unlink1-processes-172 13417.62 ( 0.00%) 16067.55 ( 19.75%) Hmean unlink1-processes-203 15293.08 ( 0.00%) 15440.40 ( 0.96%) Hmean unlink1-processes-234 13719.32 ( 0.00%) 16190.74 ( 18.01%) Hmean unlink1-processes-265 16400.97 ( 0.00%) 16115.22 ( -1.74%) Hmean unlink1-processes-296 14388.60 ( 0.00%) 16216.13 ( 12.70%) Hmean unlink1-processes-320 15771.85 ( 0.00%) 15905.96 ( 0.85%) x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching) and ppc64 (with paca) show similar improvements in the unlink microbenches. The small delta for ppc64 (2ms), does not represent the gains on the unlink runs. In the case of x86, there was a decent amount of variation in the latency runs, but always within a 20 to 50ms increase), ppc was more constant. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: mark.rutland@arm.com Link: http://lkml.kernel.org/r/1483479794-14013-5-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Davidlohr Bueso 提交于
This patch effectively replaces the tsk pointer dereference (which is obviously == current), to directly use get_current() macro. This is to make the removal of setting foreign task states smoother and painfully obvious. Performance win on some archs such as x86-64 and ppc64. On a microbenchmark that calls set_task_state() vs set_current_state() and an inode rwsem pounding benchmark doing unlink: == 1. x86-64 == Avg runtime set_task_state(): 601 msecs Avg runtime set_current_state(): 552 msecs vanilla dirty Hmean unlink1-processes-2 36089.26 ( 0.00%) 38977.33 ( 8.00%) Hmean unlink1-processes-5 28555.01 ( 0.00%) 29832.55 ( 4.28%) Hmean unlink1-processes-8 37323.75 ( 0.00%) 44974.57 ( 20.50%) Hmean unlink1-processes-12 43571.88 ( 0.00%) 44283.01 ( 1.63%) Hmean unlink1-processes-21 34431.52 ( 0.00%) 38284.45 ( 11.19%) Hmean unlink1-processes-30 34813.26 ( 0.00%) 37975.17 ( 9.08%) Hmean unlink1-processes-48 37048.90 ( 0.00%) 39862.78 ( 7.59%) Hmean unlink1-processes-79 35630.01 ( 0.00%) 36855.30 ( 3.44%) Hmean unlink1-processes-110 36115.85 ( 0.00%) 39843.91 ( 10.32%) Hmean unlink1-processes-141 32546.96 ( 0.00%) 35418.52 ( 8.82%) Hmean unlink1-processes-172 34674.79 ( 0.00%) 36899.21 ( 6.42%) Hmean unlink1-processes-203 37303.11 ( 0.00%) 36393.04 ( -2.44%) Hmean unlink1-processes-224 35712.13 ( 0.00%) 36685.96 ( 2.73%) == 2. ppc64le == Avg runtime set_task_state(): 938 msecs Avg runtime set_current_state: 940 msecs vanilla dirty Hmean unlink1-processes-2 19269.19 ( 0.00%) 30704.50 ( 59.35%) Hmean unlink1-processes-5 20106.15 ( 0.00%) 21804.15 ( 8.45%) Hmean unlink1-processes-8 17496.97 ( 0.00%) 17243.28 ( -1.45%) Hmean unlink1-processes-12 14224.15 ( 0.00%) 17240.21 ( 21.20%) Hmean unlink1-processes-21 14155.66 ( 0.00%) 15681.23 ( 10.78%) Hmean unlink1-processes-30 14450.70 ( 0.00%) 15995.83 ( 10.69%) Hmean unlink1-processes-48 16945.57 ( 0.00%) 16370.42 ( -3.39%) Hmean unlink1-processes-79 15788.39 ( 0.00%) 14639.27 ( -7.28%) Hmean unlink1-processes-110 14268.48 ( 0.00%) 14377.40 ( 0.76%) Hmean unlink1-processes-141 14023.65 ( 0.00%) 16271.69 ( 16.03%) Hmean unlink1-processes-172 13417.62 ( 0.00%) 16067.55 ( 19.75%) Hmean unlink1-processes-203 15293.08 ( 0.00%) 15440.40 ( 0.96%) Hmean unlink1-processes-234 13719.32 ( 0.00%) 16190.74 ( 18.01%) Hmean unlink1-processes-265 16400.97 ( 0.00%) 16115.22 ( -1.74%) Hmean unlink1-processes-296 14388.60 ( 0.00%) 16216.13 ( 12.70%) Hmean unlink1-processes-320 15771.85 ( 0.00%) 15905.96 ( 0.85%) Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: mark.rutland@arm.com Link: http://lkml.kernel.org/r/1483479794-14013-4-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Davidlohr Bueso 提交于
This patch effectively replaces the tsk pointer dereference (which is obviously == current), to directly use get_current() macro. This is to make the removal of setting foreign task states smoother and painfully obvious. Performance win on some archs such as x86-64 and ppc64 -- arm64 is no longer an issue. Signed-off-by: NDavidlohr Bueso <dave@stgolabs.net> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: mark.rutland@arm.com Link: http://lkml.kernel.org/r/1483479794-14013-3-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Davidlohr Bueso 提交于
This patch effectively replaces the tsk pointer dereference (which is obviously == current), to directly use get_current() macro. In this case, do_exit() always passes current to exit_mm(), hence we can simply get rid of the argument. This is also a performance win on some archs such as x86-64 and ppc64 -- arm64 is no longer an issue. Signed-off-by: NDavidlohr Bueso <dbueso@suse.de> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: mark.rutland@arm.com Link: http://lkml.kernel.org/r/1483479794-14013-2-git-send-email-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Waiman Long 提交于
This is a follow-up of commit: cfd8983f ("x86, locking/spinlocks: Remove ticket (spin)lock implementation") The static_key structure 'paravirt_ticketlocks_enabled' is now removed as it is no longer used. As a result, the init functions kvm_spinlock_init_jump() and xen_init_spinlocks_jump() are also removed. A simple build and boot test was done to verify it. Signed-off-by: NWaiman Long <longman@redhat.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1484252878-1962-1-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 12 1月, 2017 6 次提交
-
-
由 Andy Shevchenko 提交于
First of all, %*ph specifier allows to dump data in hex format using the pointer to a buffer. This is suitable to use here. Besides that Thomas suggested to move it to critical level and replace __FILE__ by explicit mention of "jumplabel". Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170110164354.47372-1-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Pan Xinhui 提交于
If prev node is not in running state or its vCPU is preempted, we can give up our vCPU slices in pv_wait_node() ASAP. Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: longman@redhat.com Link: http://lkml.kernel.org/r/1484035006-6787-1-git-send-email-xinhui.pan@linux.vnet.ibm.com [ Fixed typos in the changelog, removed ugly linebreak from the code. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Waiman Long 提交于
The spin_lock_bh_nested() API is defined but is not used anywhere in the kernel. So all spin_lock_bh_nested() and related APIs are now removed. Signed-off-by: NWaiman Long <longman@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1483975612-16447-1-git-send-email-longman@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "27 fixes. There are three patches that aren't actually fixes. They're simple function renamings which are nice-to-have in mainline as ongoing net development depends on them." * akpm: (27 commits) timerfd: export defines to userspace mm/hugetlb.c: fix reservation race when freeing surplus pages mm/slab.c: fix SLAB freelist randomization duplicate entries zram: support BDI_CAP_STABLE_WRITES zram: revalidate disk under init_lock mm: support anonymous stable page mm: add documentation for page fragment APIs mm: rename __page_frag functions to __page_frag_cache, drop order from drain mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free mm, memcg: fix the active list aging for lowmem requests when memcg is enabled mm: don't dereference struct page fields of invalid pages mailmap: add codeaurora.org names for nameless email commits signal: protect SIGNAL_UNKILLABLE from unintentional clearing. mm: pmd dirty emulation in page fault handler ipc/sem.c: fix incorrect sem_lock pairing lib/Kconfig.debug: fix frv build failure mm: get rid of __GFP_OTHER_NODE mm: fix remote numa hits statistics mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done} ocfs2: fix crash caused by stale lvb with fsdlm plugin ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix rtlwifi crash, from Larry Finger. 2) Memory disclosure in appletalk ipddp routing code, from Vlad Tsyrklevich. 3) r8152 can erroneously split an RX packet into multiple URBs if the Rx FIFO is not empty when we suspend. Fix this by waiting for the FIFO to empty before suspending. From Hayes Wang. 4) Two GRO fixes (enter slow path when not enough SKB tail room exists, disable frag0 optimizations when there are IPV6 extension headers) from Eric Dumazet and Herbert Xu. 5) A series of mlx5e bug fixes (do source udp port offloading for tunnels properly, Ip fragment matching fixes, handling firmware errors properly when installing TC rules, etc.) from Saeed Mahameed, Or Gerlitz, Roi Dayan, Hadar Hen Zion, Gil Rockah, and Daniel Jurgens. 6) Two VRF fixes from David Ahern (don't skip multipath selection for VRF paths, disallow VRF to be configured with table ID 0). * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) net: vrf: do not allow table id 0 net: phy: marvell: fix Marvell 88E1512 used in SGMII mode sctp: Fix spelling mistake: "Atempt" -> "Attempt" net: ipv4: Fix multipath selection with vrf cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig gro: use min_t() in skb_gro_reset_offset() net/mlx5: Only cancel recovery work when cleaning up device net/mlx5e: Remove WARN_ONCE from adaptive moderation code net/mlx5e: Un-register uplink representor on nic_disable net/mlx5e: Properly handle FW errors while adding TC rules net/mlx5e: Fix kbuild warnings for uninitialized parameters net/mlx5e: Set inline mode requirements for matching on IP fragments net/mlx5e: Properly get address type of encapsulation IP headers net/mlx5e: TC ipv4 tunnel encap offload error flow fixes net/mlx5e: Warn when rejecting offload attempts of IP tunnels net/mlx5e: Properly handle offloading of source udp port for IP tunnels gro: Disable frag0 optimization on IPv6 ext headers gro: Enter slow-path if there is no tailroom mlx4: Return EOPNOTSUPP instead of ENOTSUPP net/af_iucv: don't use paged skbs for TX on HiperSockets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fix from Herbert Xu: "This fixes a regression in aesni that renders it useless if it's built-in with a modular pcbc configuration" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni - Fix failure when built-in with modular pcbc
-
- 11 1月, 2017 17 次提交
-
-
由 David Ahern 提交于
Frank reported that vrf devices can be created with a table id of 0. This breaks many of the run time table id checks and should not be allowed. Detect this condition at create time and fail with EINVAL. Fixes: 193125db ("net: Introduce VRF device driver") Reported-by: NFrank Kellermann <frank.kellermann@atos.net> Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
When an Marvell 88E1512 PHY is connected to a nic in SGMII mode, the fiber page is used for the SGMII host-side connection. The PHY driver notices that SUPPORTED_FIBRE is set, so it tries reading the fiber page for the link status, and ends up reading the MAC-side status instead of the outgoing (copper) link. This leads to incorrect results reported via ethtool. If the PHY is connected via SGMII to the host, ignore the fiber page. However, continue to allow the existing power management code to suspend and resume the fiber page. Fixes: 6cfb3bcc ("Marvell phy: check link status in case of fiber link.") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
Trivial fix to spelling mistake in WARN_ONCE message Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
fib_select_path does not call fib_select_multipath if oif is set in the flow struct. For VRF use cases oif is always set, so multipath route selection is bypassed. Use the FLOWI_FLAG_SKIP_NH_OIF to skip the oif check similar to what is done in fib_table_lookup. Add saddr and proto to the flow struct for the fib lookup done by the VRF driver to better match hash computation for a flow. Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
We now 'select SOCK_CGROUP_DATA' but Kconfig complains that this is not right when CONFIG_NET is disabled and there is no socket interface: warning: (CGROUP_BPF) selects SOCK_CGROUP_DATA which has unmet direct dependencies (NET) I don't know what the correct solution for this is, but simply removing the dependency on NET from SOCK_CGROUP_DATA by moving it out of the 'if NET' section avoids the warning and does not produce other build errors. Fixes: 483c4933 ("cgroup: Fix CGROUP_BPF config") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
On 32bit arches, (skb->end - skb->data) is not 'unsigned int', so we shall use min_t() instead of min() to avoid a compiler error. Fixes: 1272ce87 ("gro: Enter slow-path if there is no tailroom") Reported-by: Nkernel test robot <fengguang.wu@intel.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox mlx5 fixes and cleanups 2017-01-10 This series includes some mlx5e general cleanups from Daniel, Gil, Hadar and myself. Also it includes some critical mlx5e TC offloads fixes from Or Gerlitz. For -stable: - net/mlx5e: Remove WARN_ONCE from adaptive moderation code Although this fix doesn't affect any functionality, I thought it is better to clean this -WARN_ONCE- up for -stable in case someone hits such corner case. Please apply and let me know if there's any problem. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Jurgens 提交于
Do not attempt to drain the health workqueue when unloading the device in the recovery flow, this can cause a deadlock when the recovery work tries to cancel itself with sync. Because the work is no longer unconditionally canceled when unloading, it must be explicitly canceled in the AER flow. fixes: 689a248d ("net/mlx5: Cancel recovery work in remove flow") Signed-off-by: NDaniel Jurgens <danielj@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gil Rockah 提交于
When trying to do interface down or changing interface configuration under heavy traffic, some of the adaptive moderation corner cases can occur and leave a WARN_ONCE call trace in the kernel log. Those WARN_ONCE are meant for debug only, and should have been inserted only under debug. We avoid such call traces by removing those WARN_ONCE. Fixes: cb3c7fd4 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: NGil Rockah <gilr@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
The code before this patch registered uplink e-Switch representor on nic_enable and unregistered on nic_cleanup, the right place for this unregister is in nic_disable. Fixes: 127ea380 ("net/mlx5: Add Representors registration API") Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Reviewed-by: NMohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
When the firmware returns an error (common example is an attempt to add twice the same rule which is refused by the some FWs), we are not properly derefing/cleaning few resources allocated on the way. Examples are vport vlan deref under eswitch vlan offloads, and encap entry/neighbour deref under eswitch encapsulation offloads, fix that. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: 8b32580d ('net/mlx5e: Add TC vlan action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hadar Hen Zion 提交于
kbuild warn about parameters that may be used uninitialized, fix it. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
For e-switch level matching on packets being an IP fragment, we need to make sure the source vport inline mode is L3, fix that. Fixes: 3f7d0eb4 ('net/mlx5e: Offload TC matching on packets being IP fragments') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
As done elsewhere in our TC/flower offload code, the address type of the encapsulation IP headers should be realized accroding to the addr_type field of the encapsulation control dissector key, do that. Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
When the route lookup fails we should return the actual error. When the neigh isn't valid, we should return -EOPNOTSUPP as done in similar cases along the code. When the offload can't take place as of invalid neigh etc, we must release the neigh. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
We silently reject offloading of IPv6 tunnels, non vxlan tunnels, vxlan tunnels where the dst port to match is not provided, etc. Be a bit more verbose and print a warning so the user better realizes what went wrong here and can fix it. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
We can offload the matching on source udp port of ip tunnels for decapsulation. We can not offload setting source udp port for tunnels as part of encapsulation. Fix both the code that deals with matching offload (decap) and the code that deal with encap offload to align with that. Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads') Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-