Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 02 12月, 2014 1 次提交
    • R
      ACPICA: Save current masks of enabled GPEs after enable register writes · c50f13c6
      由 Rafael J. Wysocki 提交于 
      There is a race condition between acpi_hw_disable_all_gpes() or
acpi_enable_all_wakeup_gpes() and acpi_ev_asynch_enable_gpe() such
that if the latter wins the race, it may mistakenly enable a GPE
disabled by the former.  This may lead to premature system wakeups
during system suspend and potentially to more serious consequences.

The source of the problem is how acpi_hw_low_set_gpe() works when
passed ACPI_GPE_CONDITIONAL_ENABLE as the second argument.  In that
case, the GPE will be enabled if the corresponding bit is set in the
enable_for_run mask of the GPE enable register containing that bit.
However, acpi_hw_disable_all_gpes() and acpi_enable_all_wakeup_gpes()
don't modify the enable_for_run masks of GPE registers when writing
to them.  In consequence, if acpi_ev_asynch_enable_gpe(), which
eventually calls acpi_hw_low_set_gpe() with the second argument
equal to ACPI_GPE_CONDITIONAL_ENABLE, is executed in parallel with
one of these functions, it may reverse changes made by them.

To fix the problem, introduce a new enable_mask field in struct
acpi_gpe_register_info in which to store the current mask of
enabled GPEs and modify acpi_hw_low_set_gpe() to take this
mask into account instead of enable_for_run when its second
argument is equal to ACPI_GPE_CONDITIONAL_ENABLE.  Also modify
the low-level routines called by acpi_hw_disable_all_gpes(),
acpi_enable_all_wakeup_gpes() and acpi_enable_all_runtime_gpes()
to update the enable_mask masks of GPE registers after all
(successful) writes to those registers.
Acked-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      c50f13c6
  3. 21 10月, 2014 3 次提交
  5. 01 10月, 2014 1 次提交
  7. 11 2月, 2014 1 次提交
  9. 16 6月, 2013 1 次提交
  11. 25 1月, 2013 2 次提交
  13. 10 1月, 2013 1 次提交
  15. 15 11月, 2012 2 次提交
  17. 21 9月, 2012 1 次提交
  19. 22 3月, 2012 1 次提交
  21. 17 1月, 2012 1 次提交
  23. 19 1月, 2011 1 次提交
  25. 12 1月, 2011 2 次提交
  27. 07 7月, 2010 2 次提交
  29. 12 6月, 2010 3 次提交
    • R
      ACPI / ACPICA: Avoid writing full enable masks to GPE registers · c9a8bbb7
      由 Rafael J. Wysocki 提交于 
      ACPICA uses acpi_hw_write_gpe_enable_reg() to re-enable a GPE after
an event signaled by it has been handled.  However, this function
writes the entire GPE enable mask to the GPE's enable register which
may not be correct.  Namely, if one of the other GPEs in the same
register was previously enabled by acpi_enable_gpe() and subsequently
disabled using acpi_set_gpe(), acpi_hw_write_gpe_enable_reg() will
re-enable it along with the target GPE.

To fix this issue rework acpi_hw_write_gpe_enable_reg() so that it
calls acpi_hw_low_set_gpe() with a special action value,
ACPI_GPE_COND_ENABLE, that will make it only enable the GPE if the
corresponding bit in its register's enable_for_run mask is set.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>
      c9a8bbb7
    • R
      ACPI / ACPICA: Fix low-level GPE manipulation code · fd247447
      由 Rafael J. Wysocki 提交于 
      ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level,
which is incorrect, because this function only enables the GPE if the
corresponding bit in its enable register's enable_for_run mask is set.
This causes acpi_set_gpe() to work incorrectly if used for enabling
GPEs that were not previously enabled with acpi_enable_gpe().  As a
result, among other things, wakeup-only GPEs are never enabled by
acpi_enable_wakeup_device(), so the devices that use them are unable
to wake up the system.

To fix this issue remove acpi_ev_enable_gpe() and its counterpart
acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with
acpi_hw_low_set_gpe() that will be used instead to manipulate GPE
enable bits at the low level.  Make the users of acpi_ev_enable_gpe()
and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and
make sure that GPE enable masks are only updated by acpi_enable_gpe()
and acpi_disable_gpe() when GPE reference counters change from 0
to 1 and from 1 to 0, respectively.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>
      fd247447
    • R
      ACPI / ACPICA: Use helper function for computing GPE masks · e4e9a735
      由 Rafael J. Wysocki 提交于 
      In quite a few places ACPICA needs to compute a GPE enable mask with
only one bit, corresponding to a given GPE, set.  Currently, that
computation is always open coded which leads to unnecessary code
duplication.  Fix this by introducing a helper function for computing
one-bit GPE enable masks and using it where appropriate.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>
      e4e9a735
  31. 23 1月, 2010 2 次提交
  33. 27 8月, 2009 1 次提交
  35. 28 3月, 2009 1 次提交
  37. 09 1月, 2009 2 次提交
  39. 31 12月, 2008 3 次提交
  41. 17 7月, 2008 2 次提交
  43. 24 4月, 2008 1 次提交
  45. 03 2月, 2007 2 次提交
  47. 14 6月, 2006 1 次提交
    • B
      ACPI: ACPICA 20060421 · b229cf92
      由 Bob Moore 提交于 
      Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
      b229cf92
  49. 31 3月, 2006 1 次提交
  51. 20 1月, 2006 1 次提交
    • B
      [ACPI] ACPICA 20060113 · 4a90c7e8
      由 Bob Moore 提交于 
      Added 2006 copyright.

At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n

Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>
      4a90c7e8