- 26 3月, 2008 3 次提交
-
-
由 Holger Schurig 提交于
Now uses __lbs_cmd() to get the "log" (it's actually more a snapshot of various counters, not a sequential log). Besides the "mechanical" convertion the patch add the following logical changes: * Removes the priv->logmsg variable, it was only used in one place anyway, also don't blindly get the counters when associating. Getting the counters then the user asks via WEXT for them is good enought. * don't set wstats.discard.fragment with log.rxfrag, because the latter is a counter for successfully received packets, not for fragmented packets. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
The old code incorrectly used lbs_cmd_with_response() and now uses lbs_cmd_async(). While there I noticed that there is no real useful return values for asynchronous command functions, so I made the function "void". Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
The CMD_MAC_CONTROL can be used for other things than just filtering packets, e.g. to enable and disable WMM. This uses the same term mac_control for the define, the function and the shadow value in struct lbs_private. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 3月, 2008 1 次提交
-
-
由 Holger Schurig 提交于
After my bit scan re-writing the SIOCSIWSCAN wext ioctl no longer supported scanning for a specific SSID. However, wpa_supplicant is a possible user of this ioctl, so here is code that add's this. While passing, removed even more of the debugfs-based scanning. You can (and should) the SIOCSIWSCAN to ask for scans, so there is no need for proprietary interfaces for scanning. And, besides, the scan result couldn't be used further, e.g. not for associating. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 3月, 2008 1 次提交
-
-
由 David Woodhouse 提交于
The struct enc_key probably wants to die too, but that can come later. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 3月, 2008 2 次提交
-
-
由 Holger Schurig 提交于
... by moving it into the file where it's sole user resides Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This also fixes a bug where should_deauth_infrastructure() always returned 0. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 2月, 2008 1 次提交
-
-
由 Ihar Hrachyshka 提交于
Fixing unaligned memory access on the blackfin architecture (maybe on the ARM also). Signed-off-by: NIhar Hrachyshka <ihar.hrachyshka@promwad.com> Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 14 次提交
-
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
If we return the channel number in a 'ret' variable where anything non-zero is later interpreted as an error, that isn't nice. It breaks WPA, for a start. OLPC trac #5485 Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
There is weirdness here; the firmware seems to refuse to change channels at will. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
We'll want to use this for meshfrobbing Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
Otherwise the device won't let us change channels. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
There seems to be no reason for a separate structure; move it all into struct lbs_private. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Change debug output codes from LBS_DEB_JOIN to LBS_DEB_ASSOC Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
New typedefs are usually frowned upon. This patch changes libertas_adapter -> struct libertas_adapter libertas_priv -> struct libertas_priv While passing, make everything checkpatch.pl-clean that gets touches. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This makes the debug output of all association stuff clearer by: * adding some lbs_deb_enter()/lbs_deb_leave() calls * printing the return level in one place * lower-casing some string Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This patch unifies the namespace of variables, functions defines and structures. It does: - rename libertas_XXX to lbs_XXX - rename LIBERTAS_XXX to lbs_XXX - rename wlan_XXX to lbs_XXX - rename WLAN_XXX to LBS_XXX (but only those that were defined in libertas-local *.h files, e.g. not defines from net/ieee80211.h) While passing, I fixed some checkpatch.pl errors too. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Acked-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 10月, 2007 7 次提交
-
-
由 Dan Williams 提交于
The 88w8385 chip, using SDIO interface and firmware release 5.0.11p0, has problems when both unicast and multicast WPA keys are set in one command. This patch ensures the keys are set independently. The original author of this patch is Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Joe Perches 提交于
This is nicer than the MAC_FMT stuff. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
The value 1 was assigned to it and there was nowhere any code that would have changed that to 0. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
For readability. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
It doesn't touch hardware and therefore doesn't need endian notations either. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 6月, 2007 1 次提交
-
-
由 Dan Williams 提交于
Don't clobber the firmware's internal state machine by setting ENABLE_RSN more than once during the 4-way handshake. Check what the ENABLE_RSN status is and only set if it should be changed. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 6月, 2007 2 次提交
-
-
由 Luis Carlos Cobo Rus 提交于
This avoids channel mismatch between driver and firmware in case we change channel while associated to an AP. Signed-off-by: NLuis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis Carlos Cobo Rus 提交于
Signed-off-by: NLuis Carlos Cobo Rus <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 12 6月, 2007 8 次提交
-
-
由 Dan Williams 提交于
Kill mixed case function names from scan.c/scan.h. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Replace WLAN_802_11_SSID with direct 'ssid' and 'ssid_len' members like ieee80211. In the process, remove private libertas_escape_essid and depend on the ieee80211 implementation of escape_essid instead. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Fix WPA so it works up through the supplicant 4-Way handshake process. Doesn't successfully pass traffic yet; may be problems installing the GTK to the firmware. - RSN needs to be enabled before the association command is sent - Use keys from the association request not the adapter structure - cmd_act_mac_strict_protection_enable != IW_AUTH_DROP_UNENCRYPTED - Fix network filtering logic in is_network_compatible() WPA helpers Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Previously if a fixed channel was specified along with an SSID, the channel request would be ignored during the association process. Instead, when searching for an adhoc or infrastructure network to join, allow filtering results based on channel so that the driver doesn't pick a BSS on a different channel than requested. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Williams 提交于
Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-