So that we don't special case disasm_line__free, allowing each
instruction class to provide an specialized destructor, like is needed
for 'lock'.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xxw4vs5n077tf35jsvjzylhb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It just chops off the 'lock' and uses the ins__find, etc machinery to
call instruction specific parsers/beautifiers.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4913ba2dzakz5rivgumosqbh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Starting with inc, incl, dec, decl.
Requested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jvh0jspefr5jyn0l7qko12st@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This:

     mov    0x95bbb6(%rip),%ecx        # ffffffff81ae8d04 <d_hash_shift>

Becomes:

     mov    d_hash_shift,%ecx

Ditto for many more instructions that take two operands.
Requested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i5opbyai2x6mn9e5yjmhx9k6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

   callq  *0x10(%rax)

was being rendered in simplified mode as:

   callq  *10

I.e. hexa, but without the 0x and omitting the register. In such cases
just use the raw form.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-m91tv004h2m1fkfgu6ovx3hb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Fixes and improvements for perf/core:

- perf_target: abstraction for --uid, --pid, --tid, --cpu, --all-cpus handling,
  eliminating code duplicated in the tools, having constraints that apply to
  all of them, from Namhyung Kim

- Fixes for handling fallback to cpu-clock on PPC, from David Ahern

- Fix for processing events with unknown size, from Jiri Olsa

- Compilation fix on 32-bit, from Jiri Olsa
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

That is what is used in vi and mutt, and as well on the 'annotate'
browser.

Eventually we can have keymappings to make people used to other key
associations more confortable.
Suggested-by: NIngo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fyln9286b8gx5q4n277l0djs@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core

Additional toggles have pushed the help line out of view on a modestly
sized terminal (120 columns wide). Shorten it to just reminders.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336510879-64610-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf-record defaults to the H/W cycles event and if it is not supported
falls back to cpu-clock. Reset the event name as well.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495811-58461-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The 'perf top' command falls back to cpu-clock if the H/W cycles event
is not supported, but the event name is not updated leading to a
misleading header:

PerfTop: 8 irqs/sec  kernel:75.0%  exact:  0.0% [1000Hz cycles],  ...

Update the event name when the event type is changed so that the
header displays correctly:

PerfTop: 794 irqs/sec  kernel:100.0%  exact:  0.0% [1000Hz cpu-clock], ...
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336495789-58420-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf stat on PPC currently fails to run:

$ perf stat -- sleep 1
  Error: open_counter returned with 6 (No such device or address). /bin/dmesg may provide additional information.

  Fatal: Not all events could be opened.

The problem is that until 2.6.37 (behavior changed with commit b0a873eb)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf stat -v -- sleep 1
cycles event is not supported by the kernel.
stalled-cycles-frontend event is not supported by the kernel.
stalled-cycles-backend event is not supported by the kernel.
instructions event is not supported by the kernel.
branches event is not supported by the kernel.
branch-misses event is not supported by the kernel.

...
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490956-57145-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

perf-record on PPC is not falling back to cpu-clock:

$ perf record -ag -fo /tmp/perf.data -- sleep 1

  Error: sys_perf_event_open() syscall returned with 6 (No such device or address).  /bin/dmesg may provide additional information.

  Fatal: No CONFIG_PERF_EVENTS=y kernel support configured?

The problem is that until 2.6.37 (behavior changed with commit b0a873eb)
perf on PPC returns ENXIO when hw_perf_event_init() fails. With this
patch we get the expected behavior:

$ perf record -ag -fo /tmp/perf.data -v -- sleep 1
Old kernel, cannot exclude guest or host samples.
The cycles event is not supported, trying to fall back to cpu-clock-ticks
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.151 MB /tmp/perf.data (~6592 samples) ]
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1336490937-57106-1-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Using PRIu64 for printing out u64 nr_events to fix compilation
for x86 32 bits.

Cc: Arun Sharma <asharma@fb.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank C. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1335958638-5160-7-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

We can easily use a single callback for both sched-in and sched-out. This
reduces the code footprint in the scheduler path as well as removes
the PMU black spot otherwise present between the out and in callback.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-o56ajxp1edwqg6x9d31wb805@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

The value of IbsOpCurCnt rolls over when it reaches IbsOpMaxCnt. Thus,
it is reset to zero by hardware. To get the correct count we need to
add the max count to it in case we received an ibs sample (valid bit
set).
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-13-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

After disabling IBS there could be still incomming NMIs with samples
that even have the valid bit cleared. Mark all this NMIs as handled to
avoid spurious interrupt messages.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-12-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When disabling ibs there might be the case where hardware continuously
generates interrupts. This is described in erratum #420 (Instruction-
Based Sampling Engine May Generate Interrupt that Cannot Be Cleared).
To avoid this we must clear the counter mask first and then clear the
enable bit. This patch implements this.

See Revision Guide for AMD Family 10h Processors, Publication #41322.

Note: We now keep track of the last read ibs config value which is
then used to disable ibs. To update the config value we pass now a
pointer to the functions reading it.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-11-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

If the last hw period is too short we might hit the irq handler which
biases the results. Thus try to have a max last period that triggers
the sw overflow.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-10-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

There are cases where the remaining period is smaller than the minimal
possible value. In this case the counter is restarted with the minimal
period. This is of no use as the interrupt handler will trigger
immediately again and most likely hits itself. This biases the
results.

So, if the remaining period is within the min range, we better do not
restart the counter and instead trigger the overflow.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-9-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Simple patch that just renames some variables for better
understanding.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-8-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch adds support for precise event sampling with IBS. There are
two counting modes to count either cycles or micro-ops. If the
corresponding performance counter events (hw events) are setup with
the precise flag set, the request is redirected to the ibs pmu:

 perf record -a -e cpu-cycles:p ...    # use ibs op counting cycle count
 perf record -a -e r076:p ...          # same as -e cpu-cycles:p
 perf record -a -e r0C1:p ...          # use ibs op counting micro-ops

Each ibs sample contains a linear address that points to the
instruction that was causing the sample to trigger. With ibs we have
skid 0. Thus, ibs supports precise levels 1 and 2. Samples are marked
with the PERF_EFLAGS_EXACT flag set. In rare cases the rip is invalid
when IBS was not able to record the rip correctly. Then the
PERF_EFLAGS_EXACT flag is cleared and the rip is taken from pt_regs.

V2:
* don't drop samples in precise level 2 if rip is invalid, instead
  support the PERF_EFLAGS_EXACT flag
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120502103309.GP18810@erda.amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Each IBS sample contains a linear address of the instruction that
caused the sample to trigger. This address is more precise than the
rip that was taken from the interrupt handler's stack. Update the rip
with that address. We use this in the next patch to implement
precise-event sampling on AMD systems using IBS.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-6-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fixing profiling at a fixed frequency, in this case the freq value and
sample period was setup incorrectly. Since sampling periods are
adjusted we also allow periods that have lower 4 bits set.

Another fix is the setup of the hw counter: If we modify
hwc->sample_period, we also need to update hwc->last_period and
hwc->period_left.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-5-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Allow enabling ibs op micro-ops counting mode.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-4-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We always need to pass the last sample period to
perf_sample_data_init(), otherwise the event distribution will be
wrong. Thus, modifiyng the function interface with the required period
as argument. So basically a pattern like this:

        perf_sample_data_init(&data, ~0ULL);
        data.period = event->hw.last_period;

will now be like that:

        perf_sample_data_init(&data, ~0ULL, event->hw.last_period);

Avoids unininitialized data.period and simplifies code.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-3-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The last sw period was not correctly updated on overflow and thus led
to wrong distribution of events. We always need to properly initialize
data.period in struct perf_sample_data.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333390758-10893-2-git-send-email-robert.richter@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The ftrace_disable_cpu() and ftrace_enable_cpu() functions were
needed back before the ring buffer was lockless. Now that the
ring buffer is lockless (and has been for some time), these functions
serve no purpose, and unnecessarily slow down operations of the tracer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It's appropriate to use __seq_open_private interface to open
some of trace seq files, because it covers all steps we are
duplicating in tracing code - zallocating the iterator and
setting it as seq_file's private.

Using this for following files:
  trace
  available_filter_functions
  enabled_functions

Link: http://lkml.kernel.org/r/1335342219-2782-5-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>

[
 Fixed warnings for:
   kernel/trace/trace.c: In function '__tracing_open':
   kernel/trace/trace.c:2418:11: warning: unused variable 'ret' [-Wunused-variable]
   kernel/trace/trace.c:2417:19: warning: unused variable 'm' [-Wunused-variable]
]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Merge branch 'perf/annotate' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Perf annotate browser improvements:

 - Get back the line separating the overheads from the disassembly, requested by
   Peter Zijlstra, Linus agreed now that it is a solid line and more column real
   state was harvested. Also it has the jump->arrow lines separated from it by
   the address/jump target column.

 - Don't change asm line color when toggling source code view. Requested by
   Peter Zijlstra.

Current snapshot:

 avtab_search_node
        │      push   %rbp
        │      mov    %rsp,%rbp
        │    → callq  mcount
        │      movzwl 0x6(%rsi),%edx
        │      and    $0x7fff,%dx
        │      test   %rdi,%rdi
        │    ↓ jne    20
   0.42 │17:┌─→xor    %eax,%eax
        │19:│  leaveq
   0.42 │   │← retq
        │   │  nopl   0x0(%rax,%rax,1)
        │20:│  mov    (%rdi),%rax
   0.08 │   │  test   %rax,%rax
        │   └──je     17
        │      movzwl (%rsi),%ecx
        │      movzwl 0x2(%rsi),%r9d
        │      movzwl 0x4(%rsi),%r8d
        │      movzwl %cx,%esi
        │      movzwl %r9w,%r10d
        │      shl    $0x9,%esi
        │      lea    (%rsi,%r10,4),%esi
        │      lea    (%r8,%rsi,1),%esi
        │      and    0x10(%rdi),%si
        │      movzwl %si,%esi
        │      mov    (%rax,%rsi,8),%rax
   1.01 │      test   %rax,%rax
        │    ↑ je     19
        │      nopw   0x0(%rax,%rax,1)
   3.19 │60:   cmp    %cx,(%rax)
        │    ↓ jne    7e
   0.08 │      cmp    %r9w,0x2(%rax)
        │    ↓ jne    7e
        │      cmp    %r8w,0x4(%rax)
        │    ↓ jne    79
        │      test   %dx,0x6(%rax)
        │    ↑ jne    19
        │79:   cmp    %r8w,0x4(%rax)
  83.45 │7e: ↑ ja     17
   3.36 │      mov    0x10(%rax),%rax
   7.98 │      test   %rax,%rax
        │    ↑ jne    60
        │      leaveq
        │    ← retq
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Additionally we were not checking if a cpu list had been provided by the
user. Fix that.
Reported-by: NDavid Ahern <dsahern@gmail.com>
Reported-by: NNamhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ao3zrouylwmt7h9ikj0krubi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This fixes spending time for evaluating parameters in trace_preempt_on/off when
the tracer config is off.

The patch mainly inspired by Steven Rostedt, thanks Steven.

Link: http://lkml.kernel.org/r/4FA73510.7070705@samsung.com

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: NMinho Ban <mhban@samsung.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Just suppress the nop operands, future infrastructure that will record
the instruction lenght (and its contents) in struct ins will allow
rendering them as nopN, i.e. nop5 for a 5-byte nop.
Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qddbeglfzqdlal8vj2yaj67y@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Instead of doing the same in all ins scnprintf methods.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8mfairi2n1nentoa852alazv@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Use same function with perf record and top to share the code checks
combinations of different switches.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-8-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There are places that check whether target task/cpu is given or not and
some of them didn't check newly introduced uid or cpu list. Add and use
three of helper functions to treat them properly.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-7-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf_target__strerror() sets @buf to a string that describes the
(perf_target-specific) error condition that is passed via @errnum.

This is similar to strerror_r() and does same thing if @errnum has a
standard errno value.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-6-git-send-email-namhyung.kim@lge.com
[ committer note: No need to use PERF_ERRNO_TARGET__SUCCESS, use shorter idiom ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add and use the modern perf_target__parse_uid() and get rid of the old
parse_target_uid().
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-5-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The perf_target_errno enumerations are used to indicate specific error
cases on perf target operations. It'd help libperf being a more generic
library.
Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com>
Suggested-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-4-git-send-email-namhyung.kim@lge.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>