During device replace test, we hit a null pointer deference (It was very easy
to reproduce it by running xfstests' btrfs/011 on the devices with the virtio
scsi driver). There were two bugs that caused this problem:
- We might allocate new chunks on the replaced device after we updated
  the mapping tree. And we forgot to replace the source device in those
  mapping of the new chunks.
- We might get the mapping information which including the source device
  before the mapping information update. And then submit the bio which was
  based on that mapping information after we freed the source device.

For the first bug, we can fix it by doing mapping tree update and source
device remove in the same context of the chunk mutex. The chunk mutex is
used to protect the allocable device list, the above method can avoid
the new chunk allocation, and after we remove the source device, all
the new chunks will be allocated on the new device. So it can fix
the first bug.

For the second bug, we need make sure all flighting bios are finished and
no new bios are produced during we are removing the source device. To fix
this problem, we introduced a global @bio_counter, we not only inc/dec
@bio_counter outsize of map_blocks, but also inc it before submitting bio
and dec @bio_counter when ending bios.

Since Raid56 is a little different and device replace dosen't support raid56
yet, it is not addressed in the patch and I add comments to make sure we will
fix it in the future.
Reported-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>

If we truncate an uncompressed inline item, ram_bytes isn't updated to reflect
the new size.  The fixe uses the size directly from the item header when
reading uncompressed inlines, and also fixes truncate to update the
size as it goes.
Reported-by: NJens Axboe <axboe@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>
CC: stable@vger.kernel.org

It is better that the position of the lock is close to the data which is
protected by it, because they may be in the same cache line, we will load
less cache lines when we access them. So we rearrange the members' position
of btrfs_space_info structure to make the lock be closer to the its data.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Add noinode_cache mount option for btrfs.

Since inode map cache involves all the btrfs_find_free_ino/return_ino
things and if just trigger the mount_opt,
an inode number get from inode map cache will not returned to inode map
cache.

To keep the find and return inode both in the same behavior,
a new bit in mount_opt, CHANGE_INODE_CACHE, is introduced for this idea.
CHANGE_INODE_CACHE is set/cleared in remounting, and the original
INODE_MAP_CACHE is set/cleared according to CHANGE_INODE_CACHE after a
success transaction.
Since find/return inode is all done between btrfs_start_transaction and
btrfs_commit_transaction, this will keep consistent behavior.

Also noinode_cache mount option will not stop the caching_kthread.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

There is a bug that using btrfs_previous_item() to search metadata extent item.
This is because in btrfs_previous_item(), we need type match, however, since
skinny metada was introduced by josef, we may mix this two types. So just
use btrfs_previous_item() is not working right.

To keep btrfs_previous_item() like normal tree search, i introduce another
function btrfs_previous_extent_item().
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

On one of our gluster clusters we noticed some pretty big lag spikes.  This
turned out to be because our transaction commit was taking like 3 minutes to
complete.  This is because we have like 30 gigs of metadata, so our global
reserve would end up being the max which is like 512 mb.  So our throttling code
would allow a ridiculous amount of delayed refs to build up and then they'd all
get run at transaction commit time, and for a cold mounted file system that
could take up to 3 minutes to run.  So fix the throttling to be based on both
the size of the global reserve and how long it takes us to run delayed refs.
This patch tracks the time it takes to run delayed refs and then only allows 1
seconds worth of outstanding delayed refs at a time.  This way it will auto-tune
itself from cold cache up to when everything is in memory and it no longer has
to go to disk.  This makes our transaction commits take much less time to run.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

This change adds infrastructure to allow for generic properties for
inodes. Properties are name/value pairs that can be associated with
inodes for different purposes. They are stored as xattrs with the
prefix "btrfs."

Properties can be inherited - this means when a directory inode has
inheritable properties set, these are added to new inodes created
under that directory. Further, subvolumes can also have properties
associated with them, and they can be inherited from their parent
subvolume. Naturally, directory properties have priority over subvolume
properties (in practice a subvolume property is just a regular
property associated with the root inode, objectid 256, of the
subvolume's fs tree).

This change also adds one specific property implementation, named
"compression", whose values can be "lzo" or "zlib" and it's an
inheritable property.

The corresponding changes to btrfs-progs were also implemented.
A patch with xfstests for this feature will follow once there's
agreement on this change/feature.

Further, the script at the bottom of this commit message was used to
do some benchmarks to measure any performance penalties of this feature.

Basically the tests correspond to:

Test 1 - create a filesystem and mount it with compress-force=lzo,
then sequentially create N files of 64Kb each, measure how long it took
to create the files, unmount the filesystem, mount the filesystem and
perform an 'ls -lha' against the test directory holding the N files, and
report the time the command took.

Test 2 - create a filesystem and don't use any compression option when
mounting it - instead set the compression property of the subvolume's
root to 'lzo'. Then create N files of 64Kb, and report the time it took.
The unmount the filesystem, mount it again and perform an 'ls -lha' like
in the former test. This means every single file ends up with a property
(xattr) associated to it.

Test 3 - same as test 2, but uses 4 properties - 3 are duplicates of the
compression property, have no real effect other than adding more work
when inheriting properties and taking more btree leaf space.

Test 4 - same as test 3 but with 10 properties per file.

Results (in seconds, and averages of 5 runs each), for different N
numbers of files follow.

* Without properties (test 1)

                    file creation time        ls -lha time
10 000 files              3.49                   0.76
100 000 files            47.19                   8.37
1 000 000 files         518.51                 107.06

* With 1 property (compression property set to lzo - test 2)

                    file creation time        ls -lha time
10 000 files              3.63                    0.93
100 000 files            48.56                    9.74
1 000 000 files         537.72                  125.11

* With 4 properties (test 3)

                    file creation time        ls -lha time
10 000 files              3.94                    1.20
100 000 files            52.14                   11.48
1 000 000 files         572.70                  142.13

* With 10 properties (test 4)

                    file creation time        ls -lha time
10 000 files              4.61                    1.35
100 000 files            58.86                   13.83
1 000 000 files         656.01                  177.61

The increased latencies with properties are essencialy because of:

*) When creating an inode, we now synchronously write 1 more item
   (an xattr item) for each property inherited from the parent dir
   (or subvolume). This could be done in an asynchronous way such
   as we do for dir intex items (delayed-inode.c), which could help
   reduce the file creation latency;

*) With properties, we now have larger fs trees. For this particular
   test each xattr item uses 75 bytes of leaf space in the fs tree.
   This could be less by using a new item for xattr items, instead of
   the current btrfs_dir_item, since we could cut the 'location' and
   'type' fields (saving 18 bytes) and maybe 'transid' too (saving a
   total of 26 bytes per xattr item) from the btrfs_dir_item type.

Also tried batching the xattr insertions (ignoring proper hash
collision handling, since it didn't exist) when creating files that
inherit properties from their parent inode/subvolume, but the end
results were (surprisingly) essentially the same.

Test script:

$ cat test.pl
  #!/usr/bin/perl -w

  use strict;
  use Time::HiRes qw(time);
  use constant NUM_FILES => 10_000;
  use constant FILE_SIZES => (64 * 1024);
  use constant DEV => '/dev/sdb4';
  use constant MNT_POINT => '/home/fdmanana/btrfs-tests/dev';
  use constant TEST_DIR => (MNT_POINT . '/testdir');

  system("mkfs.btrfs", "-l", "16384", "-f", DEV) == 0 or die "mkfs.btrfs failed!";

  # following line for testing without properties
  #system("mount", "-o", "compress-force=lzo", DEV, MNT_POINT) == 0 or die "mount failed!";

  # following 2 lines for testing with properties
  system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";
  system("btrfs", "prop", "set", MNT_POINT, "compression", "lzo") == 0 or die "set prop failed!";

  system("mkdir", TEST_DIR) == 0 or die "mkdir failed!";
  my ($t1, $t2);

  $t1 = time();
  for (my $i = 1; $i <= NUM_FILES; $i++) {
      my $p = TEST_DIR . '/file_' . $i;
      open(my $f, '>', $p) or die "Error opening file!";
      $f->autoflush(1);
      for (my $j = 0; $j < FILE_SIZES; $j += 4096) {
          print $f ('A' x 4096) or die "Error writing to file!";
      }
      close($f);
  }
  $t2 = time();
  print "Time to create " . NUM_FILES . ": " . ($t2 - $t1) . " seconds.\n";
  system("umount", DEV) == 0 or die "umount failed!";
  system("mount", DEV, MNT_POINT) == 0 or die "mount failed!";

  $t1 = time();
  system("bash -c 'ls -lha " . TEST_DIR . " > /dev/null'") == 0 or die "ls failed!";
  $t2 = time();
  print "Time to ls -lha all files: " . ($t2 - $t1) . " seconds.\n";
  system("umount", DEV) == 0 or die "umount failed!";
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

When writing to a file we drop existing file extent items that cover the
write range and then add a new file extent item that represents that write
range.

Before this change we were doing a tree lookup to remove the file extent
items, and then after we did another tree lookup to insert the new file
extent item.
Most of the time all the file extent items we need to drop are located
within a single leaf - this is the leaf where our new file extent item ends
up at. Therefore, in this common case just combine these 2 operations into
a single one.

By avoiding the second btree navigation for insertion of the new file extent
item, we reduce btree node/leaf lock acquisitions/releases, btree block/leaf
COW operations, CPU time on btree node/leaf key binary searches, etc.

Besides for file writes, this is an operation that happens for file fsync's
as well. However log btrees are much less likely to big as big as regular
fs btrees, therefore the impact of this change is smaller.

The following benchmark was performed against an SSD drive and a
HDD drive, both for random and sequential writes:

  sysbench --test=fileio --file-num=4096 --file-total-size=8G \
     --file-test-mode=[rndwr|seqwr] --num-threads=512 \
     --file-block-size=8192 \ --max-requests=1000000 \
     --file-fsync-freq=0 --file-io-mode=sync [prepare|run]

All results below are averages of 10 runs of the respective test.

** SSD sequential writes

Before this change: 225.88 Mb/sec
After this change:  277.26 Mb/sec

** SSD random writes

Before this change: 49.91 Mb/sec
After this change:  56.39 Mb/sec

** HDD sequential writes

Before this change: 68.53 Mb/sec
After this change:  69.87 Mb/sec

** HDD random writes

Before this change: 13.04 Mb/sec
After this change:  14.39 Mb/sec
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

Convert all applicable cases of printk and pr_* to the btrfs_* macros.

Fix all uses of the BTRFS prefix.
Signed-off-by: NFrank Holton <fholton@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

All the subvolues that are involved in send must be read-only during the
whole operation. The ioctl SUBVOL_SETFLAGS could be used to change the
status to read-write and the result of send stream is undefined if the
data change unexpectedly.

Fix that by adding a refcount for all involved roots and verify that
there's no send in progress during SUBVOL_SETFLAGS ioctl call that does
read-only -> read-write transition.

We need refcounts because there are no restrictions on number of send
parallel operations currently run on a single subvolume, be it source,
parent or one of the multiple clone sources.

Kernel is silent when the RO checks fail and returns EPERM. The same set
of checks is done already in userspace before send starts.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

It's not used anywhere, so just drop it.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

I need to create a fake tree to test qgroups and I don't want to have to setup a
fake btree_inode.  The fact is we only use the radix tree for the fs_info, so
everybody else who allocates an extent_io_tree is just wasting the space anyway.
This patch moves the radix tree and its lock into btrfs_fs_info so there is less
stuff I have to fake to do qgroup sanity tests.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NChris Mason <clm@fb.com>

The kernel macro pr_debug is defined as a empty statement when DEBUG is
not defined. Make btrfs_debug match pr_debug to avoid spamming
the kernel log with debug messages
Signed-off-by: NFrank Holton <fholton@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Found by uselex.rb:
> btrfs_get_inode_ref_index: [R]: exported from:
fs/btrfs/inode-item.o fs/btrfs/btrfs.o fs/btrfs/built-in.o
Signed-off-by: NSergei Trofimovich <slyfox@gentoo.org>
Reviewed-by: NDavid Stebra <dsterba@suse.cz>
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

There are many btrfs functions that manually search the tree for an
item. They all reimplement the same mechanism and differ in the
conditions that they use to find the item. __inode_info() is one such
example. Zach Brown proposed creating a new interface to take the place
of these functions.

This patch is the first step to creating the interface. A new function,
btrfs_find_item, has been added to ctree.c and prototyped in ctree.h.
It is identical to __inode_info, except that the order of the parameters
has been rearranged to more closely those of similar functions elsewhere
in the code (now, root and path come first, then the objectid, offset
and type, and the key to be filled in last). __inode_info's callers have
been set to call this new function instead, and __inode_info itself has
been removed.
Signed-off-by: NKelley Nielsen <kelleynnn@gmail.com>
Suggested-by: NZach Brown <zab@redhat.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Now that we have the infrastructure for per-super attributes, we can
publish device membership in /sys/fs/btrfs/<fsid>/devices. The information
is published as symlinks to the block devices.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

While trying to debug ENOSPC issues, it's helpful to understand what the
kernel's view of the available space is. We export this information
via ioctl, but sysfs files are more easily used.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

This patch adds per-super attributes to sysfs.

It doesn't publish any attributes yet, but does the proper lifetime
handling as well as the basic infrastructure to add new attributes.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

There are some feature bits that require no offline setup and can
be enabled online. I've only reviewed extended irefs, but there will
probably be more.

We introduce three new ioctls:
- BTRFS_IOC_GET_SUPPORTED_FEATURES: query the kernel for supported features.
- BTRFS_IOC_GET_FEATURES: query the kernel for enabled features on a per-fs
  basis, as well as querying for which features are changeable with mounted.
- BTRFS_IOC_SET_FEATURES: change features on a per-fs basis.

We introduce two new masks per feature set (_SAFE_SET and _SAFE_CLEAR) that
allow us to define which features are safe to change at runtime.

The failure modes for BTRFS_IOC_SET_FEATURES are as follows:
- Enabling a completely unsupported feature: warns and returns -ENOTSUPP
- Enabling a feature that can only be done offline: warns and returns -EPERM
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

We were looking at file_extent_num_bytes unconditionally when looking at
referenced data bytes, but this isn't correct for compression.  Fix this by
checking the compression of the file extent we are and setting num_bytes to
disk_num_bytes in the case of compression so that we are marking the proper
bytes as referenced.  This fixes check_int_data freaking out when running
btrfs/004.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

Btrfs has always had these filler extent data items for holes in inodes.  This
has made somethings very easy, like logging hole punches and sending hole
punches.  However for large holey files these extent data items are pure
overhead.  So add an incompatible feature to no longer add hole extents to
reduce the amount of metadata used by these sort of files.  This has a few
changes for logging and send obviously since they will need to detect holes and
log/send the holes if there are any.  I've tested this thoroughly with xfstests
and it doesn't cause any issues with and without the incompat format set.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <clm@fb.com>

These two functions are only stated but undefined.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

3 of 4 callers actually want file_inode()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

rename the function -- btrfs_start_all_delalloc_inodes(), and make its
name be compatible to btrfs_wait_ordered_roots(), since they are always
used at the same place.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Originally, we introduced scrub_super_lock to synchronize
tree log code with scrubbing super.

However we can replace scrub_super_lock with device_list_mutex,
because writing super will hold this mutex, this will reduce an extra
lock holding when writing supers in sync log code.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I'm going to be removing hole extents in the near future so I wanted to make a
sanity test for btrfs_get_extent to make sure I don't break anything in the
meantime.  This patch just puts btrfs_get_extent through its paces by giving it
a completely unreasonable mapping to look at and make sure it is giving us back
maps that make sense.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

So both Liu and I made huge messes of find_lock_delalloc_range trying to fix
stuff, me first by fixing extent size, then him by fixing something I broke and
then me again telling him to fix it a different way.  So this is obviously a
candidate for some testing.  This patch adds a pseudo fs so we can allocate fake
inodes for tests that need an inode or pages.  Then it addes a bunch of tests to
make sure find_lock_delalloc_range is acting the way it is supposed to.  With
this patch and all of our previous patches to find_lock_delalloc_range I am sure
it is working as expected now.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

It is not used for anything.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Remove unused parameter, 'eb'. Unused since introduction in
5f39d397

Updated to be rebased against current upstream and correct diff supplied this time!
Signed-off-by: NRoss Kirk <ross.kirk@gmail.com>
Reviewed-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

While looking at somebodys corruption I became completely convinced that
btrfs_split_item was broken, so I wrote this test to verify that it was working
as it was supposed to.  Thankfully it appears to be working as intended, so just
add this test to make sure nobody breaks it in the future.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Remove unused eb parameter from btrfs_item_nr
Signed-off-by: NRoss Kirk <ross.kirk@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This isn't used for anything anymore, just remove it.
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Forever ago I made the worst case calculator say that we could potentially split
into 3 blocks for every level on the way down, which isn't right.  If we split
we're only going to get two new blocks, the one we originally cow'ed and the new
one we're going to split.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we failed to actually allocate the correct size of the extent to relocate we
will end up in an infinite loop because we won't return an error, we'll just
move on to the next extent.  So fix this up by returning an error, and then fix
all the callers to return an error up the stack rather than BUG_ON()'ing.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

One of the complaints we get a lot is how many BUG_ON()'s we have.  So to help
with this I'm introducing a kconfig option to enable/disable a new ASSERT()
mechanism much like what XFS does.  This will allow us developers to still get
our nice panics but allow users/distros to compile them out.  With this we can
go through and convert any BUG_ON()'s that we have to catch actual programming
mistakes to the new ASSERT() and then fix everybody else to return errors.  This
will also allow developers to leave sanity checks in their new code to make sure
we don't trip over problems while testing stuff and vetting new features.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Internally, btrfs_header_chunk_tree_uuid() calculates an unsigned long, but
casts it to a pointer, while all callers cast it to unsigned long again.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Internally, btrfs_header_fsid() calculates an unsigned long, but casts
it to a pointer, while all callers cast it to unsigned long again.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Internally, btrfs_dev_extent_chunk_tree_uuid() calculates an unsigned long,
but casts it to a pointer, while all callers cast it to unsigned long
again.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

All callers of btrfs_device_fsid() cast its return type to unsigned long.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>