Also fixed the assignment of multiout.dac_nids to satisfy const.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The connection lists are static and we can reuse the previous results
instead of querying via verb at each time.  This will reduce the I/O
in the runtime especially for some codec auto-parsers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Since multiple codec drivers already use the input-jack stuff, let's
make common helper functions to reduce the duplicated codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The sticky PCM stream assignment introduced in 2.6.36 kernel seems
causing problems on AD codecs.  At some time later, the streaming no
longer works by unknown reason.  A simple workaround is to disable
sticky-assignment for these codecs.
Tested-by: NVasily Khoruzhick <anarsoul@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the explicit ifdef check and call of check_power_status ops with
a new helper function, hda_call_check_power_status().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The new sticky PCM parameter introduced the delayed clean-ups of
stream- and channel-id tags.  In the current implementation, this check
(adding dirty flag) and actual clean-ups are done only for the codec
chip.  However, with HD-audio architecture, multiple codecs can be
on a single bus, and the controller assign stream- and channel-ids in
the bus-wide.

In this patch, the stream-id and channel-id are checked over all codecs
connected to the corresponding bus.  Together with it, the mutex is
moved to struct hda_bus, as this becomes also bus-wide.
Reported-and-tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit eb541337
    ALSA: hda - Make converter setups sticky
changes the semantics of snd_hda_codec_cleanup_stream() not to clean up
the stream at that moment but delay the action.  This broke the codes
expecting that the clean-up is done immediately, such as dynamic ADC
changes in some codec drivers.

This patch fixes the issue by introducing a lower helper,
__snd_hda_codec_cleanup_stream(), to allow the immediate clean up.
The original snd_hda_codec_cleanup_stream() is kept as is now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far, we reset the converter setups like the stream-tag, the
channel-id and format-id in prepare callbacks, and clear them in
cleanup callbacks.  This often causes a silence of the digital
receiver for a couple of seconds.

This patch tries to delay the converter setup changes as much as
possible.  The converter setups are cached and aren't reset as long
as the same values are used.  At suspend/resume, they are cleared
to be recovered properly, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Define constants for the HD-audio stream format bits, and replace the
magic numbers in codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Passing IEC 61937 encapsulated compressed audio at bitrates over 6.144
Mbps (i.e. more than a single 2-channel 16-bit 192kHz IEC 60958 link)
over HDMI requires the use of HBR Audio Stream Packets instead of Audio
Sample Packets.

Enable HBR mode when the stream has 8 channels and the Non-PCM bit is
set.

If the audio converter is not connected to any HBR-capable pins, return
-EINVAL in prepare().
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Set bit 15 (Stream Type) of HDA Stream Format to 1 (Non-PCM) when IEC958
channel status bit 1 (AES0 & 0x02) is set to 1 (non-audio).

This is a prequisite for HDMI HBR passthrough.
Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The function IDs are different for audio and modem. Do not mix them.
Also, show the unsolicited bit in the function_id register.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

Many codecs now clear the pin controls at suspend via snd_hda_shutup_pins()
for reducing the click noise at power-off.  But this leaves some pins
uninitialized, and they'll be never recovered after resume.

This patch adds the proper recovery of cleared pin controls on resume.
Also it adds a check of bus->shutdown so that pins won't be cleared at
module unloading.

Reference: Kernel bug 16339
	http://bugzilla.kernel.org/show_bug.cgi?id=16339

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new helper, snd_hda_codec_update_cache(), for reducing the unneeded
verbs.  This function checks the cached value and skips if it's identical
with the given one.  Otherwise it works like snd_hda_codec_write_cache().

The alc269 code uses this function as an example.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Define the constant rather in the common header file.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a common helper function for clearing pin controls before suspend.
Use the pincfg array instead of looking through all widget tree.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Analog Device codecs seem to have problems with the triggering of
pin-sensing although their pincaps give the trigger requirements.
Some reported that constant CPU load on HP laptops with AD codecs.

For avoiding this regression, add a flag to codec struct to notify
explicitly that the codec doesn't suppot the trigger at pin-sensing.
Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This set of changes add missing NID values to some static control
elemenents. Also, it handles all "Capture Source" or "Input Source"
controls.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>

For codecs without EPSS support (G45/IbexPeak), the hotplug event will
be lost if the HDA is powered off during the time. After that the pin
presence detection verb returns inaccurate info.

So always power-on HDA link for !EPSS codecs.

KarL offers the fact and Takashi recommends to flag hda_bus. Thanks!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA036 spec states:
  DP (Display Port) indicates whether the Pin Complex Widget supports
  connection to a Display Port sink.  Supported if set to 1. Note that
  it is possible for the pin widget to support more than one digital
  display connection type, e.g. HDMI and DP bit are both set to 1.

Also export the DP pin cap in procfs.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Note that the HBR capability only applies to HDMI pin.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The snd_hda_pcm_type_name array is local only.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The beep_mode parameter for snd-hda-intel module allows to choose among
different digital beep device registation to the input layer.

0 = do not register to the input layer
1 = register to the input layer all time
2 = use "Beep Switch" control exported to user space mixer applications

Also, introduce CONFIG_SND_HDA_INPUT_BEEP_MODE for default value.
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the power on/off counter and expose via sysfs files.
The sysfs files, power_on_acct and power_off_acct, are created under
each codec hwdep sysfs directory (e.g. /sys/class/sound/hwC0D0).
The files show the msec length of the codec power-on and power-off,
respectively.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Output something like:

Node 0x02 [Audio Output] wcaps 0x11: Stereo
  Device: name="ALC888 Analog", type="Audio", device=0, substream=0
  Converter: stream=0, channel=0
  ...
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add reboot notifier to each codec so that it can do some workarounds
needed for reboot.

So far, patch_sigmatel.c calls its shutup routine for avoiding noises
at reboot on some HP machines.

References: Novell bnc#544779
	http://bugzilla.novell.com/show_bug.cgi?id=544779Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Recently we hit a bug in our dev board, whose HDMI codec#3 may emit
redundant/spurious responses, which were then taken as responses to
command for another onboard Realtek codec#2, and mess up both codecs.

Extend the azx_rb.cmds and azx_rb.res to array and track each codec's
commands/responses separately. This helps keep good codec safe from
broken ones.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the patch module option to apply a "patch" as a firmware to
modify pin configurations or give additional hints to the driver
before actually initializing and configuring the codec.

This can be used as a workaround when the BIOS doesn't give sufficient
information or give wrong information that doesn't match with the real
hardware setup, until it's fixed statically in the driver via a quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The codec setup call via snd_hda_codec_configure() isn't necessarily
called in snd_hda_codec_new().  For the later added feature, it's better
to change the code flow like:
 - create all codec instances
 - configure each codec
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The reset of a BUS controller during operations is somehow risky and
shouldn't be done inevitably for devices that have apparently no such
codec-communication problems.

This patch adds the check of the hardware and limits the bus-reset
capability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some machines machine cause a severe CORB/RIRB stall in certain
weird conditions, such as PA access at the start up together with
fglrx driver.  This seems unable to be recovered without the controller
reset.

This patch allows the bus controller reset at critical errors so
that the communication gets recovered again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Split the name string in hda_codec struct to vendor_name and chip_name
strings to be stored directly from the preset name.
Since mostly only the chip name is referred in many patch_*.c, this
results in the reduction of many codes in the end.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current error-recovery scheme for the codec communication errors
doesn't work always well.  Especially falling back to the
single-command mode causes the fatal problem on many systems.

In this patch, the problematic verb is re-issued again after the error
(even with polling mode) instead of the single-cmd mode.  The
single-cmd mode will be used only when specified via the command
option explicitly, mainly just for testing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch does two things:
 Output Intel HDA Function Id in /proc/asound/cardX/codec#X
 Align Vendor/Subsystem/Revision Ids to 8 characters, front-padded with zeros

Before:
 Vendor Id: 0x11d41884
 Subsystem Id: 0x103c281a
 Revision Id: 0x100100

After:
 Function Id: 0x1
 Vendor Id: 0x11d41884
 Subsystem Id: 0x103c281a
 Revision Id: 0x0100100

As report on the Kernel Bugzilla #12888
Signed-off-by: NPascal de Bruijn <pascal@unilogicnetworks.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a flag to work around the non-standard amp-value handling on
Conexant codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Rename from override_pin and cur_pin with user_pin and driver_pin,
respectively, to be a bit more intuitive.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the generic pincfg cache and save/restore functions.
Also introduced the pin-overriding via hwdep sysfs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some fixes regarding snd-hda-intel workqueue:
- Use create_singlethread_workqueue() instead of create_workqueue()
  as per-CPU work isn't required.
- Allocate workq name string properly
- Renamed the workq name to "hd-audio*" to be more obvious.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
  called during probe callback (as probe callback itself could be
  invoked from eventd)

This patch adds an own workq for each driver instance to solve these
problems.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>