- 05 6月, 2012 8 次提交
-
-
由 Gustavo Padovan 提交于
Fix all warning and errors reported by checkpatch but license trailing whitespace and bdaddr_t definition. Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Andrei Emeltchenko 提交于
Remove magic number with defined link key size. Signed-off-by: NAndrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Szymon Janc 提交于
HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to reset device on close instead of init, not to not reset at all. Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion. Signed-off-by: NSzymon Janc <szymon.janc@tieto.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Gustavo Padovan 提交于
As reported by checkpatch.pl Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Mat Martineau 提交于
Now that l2cap_ctrl is used to set up control fields, these macros are not needed. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
-
由 Mat Martineau 提交于
The ERTM specification requires the retransmit timer to be cancelled when the monitor timer is set. The retransmit timer cannot be set again while the monitor timer is pending. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
-
由 Mat Martineau 提交于
This deletes the receive code that had handlers for each frame type at the top level, and then had logic to determine the receive state within each handler. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
-
由 Mat Martineau 提交于
This fixes a regression from commit 2ead70b8 that is present in all kernels starting at v3.0. When L2CAP information was moved to struct l2cap_chan, a check was added to l2cap_chan_del to avoid certain cleanup operations when ERTM or streaming mode had not yet been initialized. The logic in the check did not take in to account that chan->conf_state is set to 0 in l2cap_chan_ready, so l2cap_chan_del failed to cancel timers and leaked memory any time the ERTM queues or lists were not empty. This change makes sure that l2cap_chan_del only returns early if ERTM initialization was not performed. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 02 6月, 2012 1 次提交
-
-
由 Paul Moore 提交于
When NetLabel is not enabled, e.g. CONFIG_NETLABEL=n, and the system receives a CIPSO tagged packet it is dropped (cipso_v4_validate() returns non-zero). In most cases this is the correct and desired behavior, however, in the case where we are simply forwarding the traffic, e.g. acting as a network bridge, this becomes a problem. This patch fixes the forwarding problem by providing the basic CIPSO validation code directly in ip_options_compile() without the need for the NetLabel or CIPSO code. The new validation code can not perform any of the CIPSO option label/value verification that cipso_v4_validate() does, but it can verify the basic CIPSO option format. The behavior when NetLabel is enabled is unchanged. Signed-off-by: NPaul Moore <pmoore@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 5月, 2012 1 次提交
-
-
由 Glauber Costa 提交于
We call the destroy function when a cgroup starts to be removed, such as by a rmdir event. However, because of our reference counters, some objects are still inflight. Right now, we are decrementing the static_keys at destroy() time, meaning that if we get rid of the last static_key reference, some objects will still have charges, but the code to properly uncharge them won't be run. This becomes a problem specially if it is ever enabled again, because now new charges will be added to the staled charges making keeping it pretty much impossible. We just need to be careful with the static branch activation: since there is no particular preferred order of their activation, we need to make sure that we only start using it after all call sites are active. This is achieved by having a per-memcg flag that is only updated after static_key_slow_inc() returns. At this time, we are sure all sites are active. This is made per-memcg, not global, for a reason: it also has the effect of making socket accounting more consistent. The first memcg to be limited will trigger static_key() activation, therefore, accounting. But all the others will then be accounted no matter what. After this patch, only limited memcgs will have its sockets accounted. [akpm@linux-foundation.org: move enum sock_flag_bits into sock.h, document enum sock_flag_bits, convert memcg_proto_active() and memcg_proto_activated() to test_bit(), redo tcp_update_limit() comment to 80 cols] Signed-off-by: NGlauber Costa <glommer@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Acked-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 5月, 2012 1 次提交
-
-
由 Gao feng 提交于
Since commit ad0081e4 "ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed" the fragment of packets is incorrect. because tunnel mode needs IPsec headers and trailer for all fragments, while on transport mode it is sufficient to add the headers to the first fragment and the trailer to the last. so modify mtu and maxfraglen base on ipsec mode and if fragment is first or last. with my test,it work well(every fragment's size is the mtu) and does not trigger slow fragment path. Changes from v1: though optimization, mtu_prev and maxfraglen_prev can be delete. replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL. add fuction ip6_append_data_mtu to make codes clearer. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
Mostly bool conversions, some inline removals and const additions. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2012 4 次提交
-
-
由 Eric Dumazet 提交于
ipv6_opt_accepted() returns a bool, and can use const pointers ipv6_addr_equal(), ipv6_addr_any(), ipv6_addr_loopback(), ipv6_addr_orchid() return a bool. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- match() method returns a boolean - return (A && B && C && D) -> return A && B && C && D - fix indentation Signed-off-by: NEric Dumazet <edumazet@google.com>
-
由 Joe Perches 提交于
Enable dynamic debugging and remove a bunch of #ifdef/#endifs. Add a lapb_dbg(level, fmt, ...) macro and replace the printk(KERN_DEBUG uses. Add pr_fmt and remove embedded prefixes. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
bool conversions where possible. __inline__ -> inline space cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2012 15 次提交
-
-
由 Eric Dumazet 提交于
bool/const conversions where possible __inline__ -> inline space cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
- sock_flag() accepts a const pointer - sock_flag() returns a boolean Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
codel_should_drop() logic allows a packet being not dropped if queue size is under max packet size. In fq_codel, we have two possible backlogs : The qdisc global one, and the flow local one. The meaningful one for codel_should_drop() should be the global backlog, not the per flow one, so that thin flows can have a non zero drop/mark probability. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Support for monitor device intended to capture all the network activity. This interface could be used by networks sniffers and is already supported by WireShark. That's a good test point to check that basic MAC support works. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This stack implementation distinguishes several types of slave interfaces. Another parameter to 'add_iface_' function is added to clarify the interface type is going to be registered. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
According IEEE 802.15.4 standard each node can be either full functionality device (FFD) or reduce functionality device (RFD). So 2 sets of operations are needed. This patch declare RFD operations structure. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Main RX data path implementation between physical and mac layers. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
An interface to allocate and register ieee802154 compatible device. The allocated device has the following representation in memory: +-----------------------+ | struct wpan_phy | +-----------------------+ | struct mac802154_priv | +-----------------------+ | driver's private data | +-----------------------+ Used by device drivers to register new instance in the stack. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo Padovan 提交于
defer_setup and suspended are now flags into bt_sk(). Signed-off-by: NGustavo Padovan <gustavo@padovan.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Mat Martineau 提交于
The ERTM and streaming mode transmit queue must only be accessed while the L2CAP channel lock is held. Locking the channel before calling l2cap_chan_send ensures that multiple threads cannot simultaneously manipulate the queue when sending and receiving concurrently. L2CAP channel locking had previously moved to the l2cap_chan struct instead of the associated socket, so some of the old socket locking can also be removed in this patch. Signed-off-by: NMat Martineau <mathewm@codeaurora.org> Signed-off-by: NGustavo Padovan <gustavo@padovan.org>
-
由 Vishal Agarwal 提交于
The mgmt_device_found function expects to receive only the significant part of the EIR data so it needs to be removed before calling the function. This patch adds a new eir_get_length() helper function to calculate the length of the significant part. Signed-off-by: NVishal Agarwal <vishal.agarwal@stericsson.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Johannes Berg 提交于
It should return bool, not int. The function even does return true/false. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Add a flag for the HT format (mixed vs. greenfield) to allow drivers to report that on receive. Not all drivers will do that though, so allow drivers to set which radiotap MCS details they report. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Add IV-room in skb also for TKIP and WEP. Extend patch: "mac80211: support adding IV-room in the skb for CCMP keys" Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 5月, 2012 7 次提交
-
-
由 Paul Gortmaker 提交于
We are going to delete the Token ring support. This removes any special processing in the core networking for token ring, (aside from net/tr.c itself), leaving the drivers and remaining tokenring support present but inert. The mass removal of the drivers and net/tr.c will be in a separate commit, so that the history of these files that we still care about won't have the giant deletion tied into their history. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Eric Lapuyade 提交于
The NFC core code already does that for them. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eric Lapuyade 提交于
Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eric Lapuyade 提交于
It is now specified that nfc_target_found() and nfc_target_lost() core functions must not be called from an atomic context. This allow us to serialize calls and protect the targets table using the nfc device lock instead of a spinlock. Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eric Lapuyade 提交于
Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Eric Lapuyade 提交于
The NFC Core now caches the active nfc target pointer, thereby avoiding the need to lookup the target table for each invocation of a driver ops. Consequently, pn533, HCI and NCI now directly receive an nfc_target pointer instead of a target index. Cc: Ilan Elias <ilane@ti.com> Signed-off-by: NEric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David S. Miller 提交于
xfrm_selector_match xfrm_sec_ctx_match __xfrm4_selector_match __xfrm6_selector_match Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 5月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
David pointed out gcc might generate poor code with 31bit fields. Using u16 is more than enough and permits a better code output. Also make the code intent more readable using constants, fixed point arithmetic not being trivial for everybody. Suggested-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo Padovan 提交于
It fixes L2CAP socket based security level elevation during a connection. The HID profile needs this (for keyboards) and it is the only way to achieve the security level elevation when using the management interface to talk to the kernel (hence the management enabling patch being the one that exposes this issue). It enables the userspace a security level change when the socket is already connected and create a way to notify the socket the result of the request. At the moment of the request the socket is made non writable, if the request fails the connections closes, otherwise the socket is made writable again, POLL_OUT is emmited. Signed-off-by: NGustavo Padovan <gustavo@padovan.org> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-