Mostly nothing special (except making sure that really all error paths
and friends call iter_put).

v2: Don't forget the raw connector_list walking in
drm_helper_move_panel_connectors_to_head. That one unfortunately can't
be converted to the iterator helpers, but since it's just some list
splicing best to just wrap the entire thing up in one critical
section.

v3: Bail out after iter_put (Harry).

Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215155843.13408-1-daniel.vetter@ffwll.ch

The requirements for connector_list locking are a bit tricky:
- We need to be able to jump over zombie conectors (i.e. with refcount
  == 0, but not yet removed from the list). If instead we require that
  there's no zombies on the list then the final kref_put must happen
  under the list protection lock, which means that locking context
  leaks all over the place. Not pretty - better to deal with zombies
  and wrap the locking just around the list_del in the destructor.

- When we walk the list we must _not_ hold the connector list lock. We
  walk the connector list at an absolutely massive amounts of places,
  if all those places can't ever call drm_connector_unreference the
  code would get unecessarily complicated.

- connector_list needs it own lock, again too many places that walk it
  that we could reuse e.g. mode_config.mutex without resulting in
  inversions.

- Lots of code uses these loops to look-up a connector, i.e. they want
  to be able to call drm_connector_reference. But on the other hand we
  want connectors to stay on that list until they're dead (i.e.
  connector_list can't hold a full reference), which means despite the
  "can't hold lock for the loop body" rule we need to make sure a
  connector doesn't suddenly become a zombie.

At first Dave&I discussed various horror-show approaches using srcu,
but turns out it's fairly easy:

- For the loop body we always hold an additional reference to the
  current connector. That means it can't zombify, and it also means
  it'll stay on the list, which means we can use it as our iterator to
  find the next connector.

- When we try to find the next connector we only have to jump over
  zombies. To make sure we don't chase bad pointers that entire loop
  is protected with the new connect_list_lock spinlock. And because we
  know that we're starting out with a non-zombie (need to drop our
  reference for the old connector only after we have our new one),
  we're guranteed to still be on the connector_list and either find
  the next non-zombie or complete the iteration.

- Only downside is that we need to make sure that the temporary
  reference for the loop body doesn't leak. iter_get/put() functions +
  lockdep make sure that's the case.

- To avoid a flag day the new iterator macro has an _iter postfix. We
  can rename it back once all the users of the unsafe version are gone
  (there's about 100 list walkers for the connector_list).

For now this patch only converts all the list walking in the core,
leaving helpers and drivers for later patches. The nice thing is that
we can now finally remove 2 FIXME comments from the
register/unregister functions.

v2:
- use irqsafe spinlocks, so that we can use this in drm_state_dump
  too.
- nuke drm_modeset_lock_all from drm_connector_init, now entirely
  cargo-culted nonsense.

v3:
- do {} while (!kref_get_unless_zero), makes for a tidier loop (Dave).
- pretty kerneldoc
- add EXPORT_SYMBOL, helpers&drivers are supposed to use this.

v4: Change lockdep annotations to only check whether we release the
iter fake lock again (i.e. make sure that iter_put is called), but
not check any locking dependecies itself. That seams to require a
recursive read lock in trylock mode.

Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-6-daniel.vetter@ffwll.ch

This is single-threaded setup code, no need for locks. And anyway,
all properties need to be set up before the driver is registered
anyway, they can't be hot-added.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-5-daniel.vetter@ffwll.ch

The list walk will shortcircuit anyway.

Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-4-daniel.vetter@ffwll.ch

This is not driver interface stuff.

Fixes: 6559c901 ("drm/atomic: add debugfs file to dump out atomic state")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-3-daniel.vetter@ffwll.ch

Spotted while auditing our ioctl table. Also nuke the
not-really-kerneldoc comments, we don't document internals and
definitely don't want to mislead people with the old dragons.

I think with this all the legacy ioctls now have proper drm_legacy_
prefixes.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213230814.19598-2-daniel.vetter@ffwll.ch

Instead of detaching only the bridge directly connected to the encoder,
detach all bridges in the chain.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-6-git-send-email-laurent.pinchart+renesas@ideasonboard.com

Most drivers that use bridges forgot to detach them at cleanup time.
Instead of fixing them one by one, detach the bridge in the core
drm_encoder_cleanup() function.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com

Instead of linking encoders and bridges in every driver (and getting it
wrong half of the time, as many drivers forget to set the drm_bridge
encoder pointer), do so in core code. The drm_bridge_attach() function
needs the encoder and optional previous bridge to perform that task,
update all the callers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Stefan Agner <stefan@agner.ch> # For DCU
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # For atmel-hlcdc
Acked-by: Vincent Abriou <vincent.abriou@st.com> # For STI
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # For sun4i
Acked-by: Xinliang Liu <z.liuxinliang@hisilicon.com> # For hisilicon
Acked-by: Jyri Sarha <jsarha@ti.com> # For tilcdc
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-4-git-send-email-laurent.pinchart+renesas@ideasonboard.com

The drm_crtc_mask() function used in <drm/drm_encoder.h> is a static
inline defined in <drm/drm_crtc.h>. If the first header is included in a
compilation unit without the second one, the following compilation
warning will be issued.

In file included from <linux>/drivers/gpu/drm/drm_bridge.c:29:0:
<linux>/include/drm/drm_encoder.h:192:95: warning: ‘drm_crtc_mask’ used but never defined
 static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc);

Fix this by including the header defining the function instead of using
a forward declaration.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-3-git-send-email-laurent.pinchart+renesas@ideasonboard.com

<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.

As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.

<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com

If we remember that node_list is a circular list containing the fake
head_node, we can use a simple list_next_entry() and skip the NULL check
for the allocated check against the head_node.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-3-chris@chris-wilson.co.uk

Mark up the pointers as constant through the API where appropriate.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-5-chris@chris-wilson.co.uk

A complement to drm_mm_for_each_node(), wraps list_for_each_entry_safe()
for walking the list of nodes safe against removal.

Note from Joonas:

"Most of the diff is about __drm_mm_nodes(mm), which could be split into
own patch and keep the R-b's."

But I don't feel like insisting on the resend.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
[danvet: Add note.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161216074718.32500-4-chris@chris-wilson.co.uk

On most platforms, there exists this ifdef:

 #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)

This makes this patch functionally useless. However, on PPC, there is
actually an explicit definition of atomic_inc_not_zero with its own
assembly that is slightly more optimized than atomic_add_unless. So,
this patch changes kref to use atomic_inc_not_zero instead, for PPC and
any future platforms that might provide an explicit implementation.

This also puts this usage of kref more in line with a verbatim reading
of the examples in Paul McKenney's paper [1] in the section titled "2.4
Atomic Counting With Check and Release Memory Barrier", which uses
atomic_inc_not_zero.

[1] http://open-std.org/jtc1/sc22/wg21/docs/papers/2007/n2167.pdfSigned-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215050110.3241-1-Jason@zx2c4.com

drm_modeset_helper.c:74: warning: No description found for parameter 'dev'

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: a3f913ca ("drm: Pass 'dev' to drm_helper_mode_fill_fb_struct()")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215170128.23972-1-ville.syrjala@linux.intel.comReviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

drm_atomic_state_put is called unconditionally, so TEST_ONLY is no
different from commit.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481812185-19098-2-git-send-email-maarten.lankhorst@linux.intel.com

drm_event_reserve_init_locked() is the correct function to call when
already holding the dev->event_lock lock.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215113602.27966-1-thierry.reding@gmail.com

Apparently my arm .config had reverted to CMA=n at some point, so I
failed to notice that I typoed the code. Fix it up so that the
cma helper will compile again.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: ca984a99 ("drm/fb_cma_helper: Replace drm_format_info() with fb->format")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215142927.20761-1-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

No point in spamming the log whenever a non-RGB fb is being
constructed. And since there's nothing to do anymore that
fb->bits_per_pixel and fb->depth are gone, we can just kill
off this entire piece of code.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-36-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Rather than compare the format u32s of two format infos, we can direclty
compare the format info pointers themselves. Noramlly all the ->format
pointers all point to somwehere in the big array, so this is a valid
way to test for equality.

Also drivers may want to point ->format at a private format info struct
instead (eg. for special compressed formats with extra planes), so
just comparing the pixel format values wouldn't necessaritly even work.
But comparing the pointers will also take care of that case.

@@
struct drm_framebuffer *a;
struct drm_framebuffer *b;
@@
(
- a->format->format != b->format->format
+ a->format != b->format
|
- a->format->format == b->format->format
+ a->format == b->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state *b;
@@
(
- a->fb->format->format != b->fb->format->format
+ a->fb->format != b->fb->format
|
- a->fb->format->format == b->fb->format->format
+ a->fb->format == b->fb->format
)

@@
struct drm_crtc *crtc;
struct drm_framebuffer *x;
@@
(
- crtc->primary->fb->format->format != x->format->format
+ crtc->primary->fb->format != x->format
|
- x->format->format != crtc->primary->fb->format->format
+ x->format != crtc->primary->fb->format
)

@@
struct drm_mode_set *set;
@@
- set->fb->format->format != set->crtc->primary->fb->format->format
+ set->fb->format != set->crtc->primary->fb->format

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-35-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Replace uses of fb->pixel_format with fb->format->format.
Less duplicated information is a good thing.

Note that coccinelle failed to eliminate the
"/* fourcc format */" comment from drm_framebuffer.h, so I had
to do that part manually.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->pixel_format = E;
	...
 }

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- a->pixel_format
+ a->format->format
|
- b.pixel_format
+ b.format->format
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- a->fb->pixel_format
+ a->fb->format->format
|
- b.fb->pixel_format
+ b.fb->format->format
)

@@
struct drm_crtc *CRTC;
@@
(
- CRTC->primary->fb->pixel_format
+ CRTC->primary->fb->format->format
|
- CRTC->primary->state->fb->pixel_format
+ CRTC->primary->state->fb->format->format
)

@@
struct drm_mode_set *set;
@@
(
- set->fb->pixel_format
+ set->fb->format->format
|
- set->crtc->primary->fb->pixel_format
+ set->crtc->primary->fb->format->format
)

@@
@@
 struct drm_framebuffer {
	 ...
-	 uint32_t pixel_format;
	 ...
 };

v2: Fix commit message (Laurent)
    Rebase due to earlier removal of many fb->pixel_format uses,
    including the 'fb->format = drm_format_info(fb->format->format);'
    snafu
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com

Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8.
Less duplicated information is a good thing.

Note that I didn't put parens around the cpp*8 in the below cocci script,
on account of not wanting spurious parens all over the place. Instead I
did the unsafe way, and tried to look over the entire diff to spot if
any dangerous expressions were produced. I didn't see any.

There are some cases where previously the code did X*bpp/8, so the
division happened after the multiplication. Those are now just X*cpp
so the division effectively happens before the multiplication,
but that is perfectly fine since bpp is always a multiple of 8.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer FB;
expression E;
@@
(
- E * FB.bits_per_pixel / 8
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel / 8
+ FB.format->cpp[0]
|
- E * FB.bits_per_pixel >> 3
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel >> 3
+ FB.format->cpp[0]
|
- (FB.bits_per_pixel + 7) / 8
+ FB.format->cpp[0]
|
- FB.bits_per_pixel
+ FB.format->cpp[0] * 8
|
- FB.format->cpp[0] * 8 != 8
+ FB.format->cpp[0] != 1
)

@@
struct drm_framebuffer *FB;
expression E;
@@
(
- E * FB->bits_per_pixel / 8
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel / 8
+ FB->format->cpp[0]
|
- E * FB->bits_per_pixel >> 3
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel >> 3
+ FB->format->cpp[0]
|
- (FB->bits_per_pixel + 7) / 8
+ FB->format->cpp[0]
|
- FB->bits_per_pixel
+ FB->format->cpp[0] * 8
|
- FB->format->cpp[0] * 8 != 8
+ FB->format->cpp[0] != 1
)

@@
struct drm_plane_state *state;
expression E;
@@
(
- E * state->fb->bits_per_pixel / 8
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel / 8
+ state->fb->format->cpp[0]
|
- E * state->fb->bits_per_pixel >> 3
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel >> 3
+ state->fb->format->cpp[0]
|
- (state->fb->bits_per_pixel + 7) / 8
+ state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel
+ state->fb->format->cpp[0] * 8
|
- state->fb->format->cpp[0] * 8 != 8
+ state->fb->format->cpp[0] != 1
)

@@
@@
- (8 * 8)
+ 8 * 8

@@
struct drm_framebuffer FB;
@@
- (FB.format->cpp[0])
+ FB.format->cpp[0]

@@
struct drm_framebuffer *FB;
@@
- (FB->format->cpp[0])
+ FB->format->cpp[0]

@@
@@
 struct drm_framebuffer {
	 ...
-	 int bits_per_pixel;
	 ...
 };

v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent)
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com

Replace uses of fb->depth with fb->format->depth. Less duplicate
information is a good thing.

@@
struct drm_framebuffer *fb;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	fb->depth = E;
	...
 }

@@
struct nouveau_framebuffer *fb;
@@
- fb->base.depth
+ fb->base.format->depth

@@
struct drm_framebuffer fb;
@@
- fb.depth
+ fb.format->depth

@@
struct drm_framebuffer *fb;
@@
- fb->depth
+ fb->format->depth

@@
struct drm_framebuffer fb;
@@
- (fb.format->depth)
+ fb.format->depth

@@
struct drm_framebuffer *fb;
@@
- (fb->format->depth)
+ fb->format->depth

@@
@@
 struct drm_framebuffer {
	 ...
-	 unsigned int depth;
	 ...
 };

v2: Drop the vmw stuff (Daniel)
    Rerun spatch due to code changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com

Replace drm_format_plane_{width,height}() usage with
drm_framebuffer_plane_{width,height}() to avoid the lookup of the format
info.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-31-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add variants of drm_format_plane_{width,height}() that take an entire fb
object instead of just the format. These should be more efficent as they
can just look up the format info from the fb->format pointer rather than
having to look it up (using a linear search based on the format).
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-30-git-send-email-ville.syrjala@linux.intel.com

Rather than store the pixel format and look up the format info as
needed,  let's just store a pointer to the format info directly
and speed up our lookups.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-29-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's use the pointer to the format information cached under
drm_framebuffer rather than look it up manually.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-28-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Get the format information via the neat fb->format pointer rather than
doing a linear search over all the format info structures.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-27-git-send-email-ville.syrjala@linux.intel.com

Replace drm_format_plane_cpp(fb->pixel_format) with just
fb->format->cpp[]. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
expression E;
@@
(
- drm_format_plane_cpp(a->pixel_format, E)
+ a->format->cpp[E]
|
- drm_format_plane_cpp(b.pixel_format, E)
+ b.format->cpp[E]
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
expression E;
@@
(
- drm_format_plane_cpp(a->fb->pixel_format, E)
+ a->fb->format->cpp[E]
|
- drm_format_plane_cpp(b.fb->pixel_format, E)
+ b.fb->format->cpp[E]
)

@@
struct drm_framebuffer *a;
identifier T;
expression E;
@@
  T = a->pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ a->format->cpp[E]
...+>

@@
struct drm_framebuffer b;
identifier T;
expression E;
@@
  T = b.pixel_format
<+...
- drm_format_plane_cpp(T, E)
+ b.format->cpp[E]
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com

Don't access plane_state->fb until we know the plane to be visible.
It it's visible, it will have an fb, and thus we don't have to
consider the NULL fb case. Makes the code look nicer.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-25-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Replace drm_format_num_planes(fb->pixel_format) with just
fb->format->num_planes. Avoids the expensive format info lookup.

@@
struct drm_framebuffer *a;
struct drm_framebuffer b;
@@
(
- drm_format_num_planes(a->pixel_format)
+ a->format->num_planes
|
- drm_format_num_planes(b.pixel_format)
+ b.format->num_planes
)

@@
struct drm_plane_state *a;
struct drm_plane_state b;
@@
(
- drm_format_num_planes(a->fb->pixel_format)
+ a->fb->format->num_planes
|
- drm_format_num_planes(b.fb->pixel_format)
+ b.fb->format->num_planes
)

@@
struct drm_framebuffer *a;
identifier T;
@@
  T = a->pixel_format
<+...
- drm_format_num_planes(T)
+ a->format->num_planes
...+>

@@
struct drm_framebuffer b;
identifier T;
@@
  T = b.pixel_format
<+...
- drm_format_num_planes(T)
+ b.format->num_planes
...+>

v2: Rerun spatch due to code changes

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com

Any framebuffer that doesn't have proper format information when
drm_framebuffer_init() is called is a bug. Let's warn and return
an error to avoid oopsing the kernel later due to dereferencing the
NULL fb->format pointer.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Suggested-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-23-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Make sure the framebuffer format info is available as early as possible
for fbs we inherit from the BIOS. This will allow us to use the fb as
if it was fully formed before we register it.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-22-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To avoid having to look up the format information struct every time,
let's just store a pointer to it under drm_framebuffer.

v2: Don't populate the fb->format pointer in drm_framebuffer_init().
    instead we'll treat a NULL format as an error later

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-20-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>

Populating fb->dev before drm_framebuffer_init() allows us to use
fb->dev already while validating the framebuffer. Let's have
drm_helper_mode_fill_fb_struct() do that for us.

Also make drm_framebuffer_init() warn us if a different device
pointer is passed to it than was passed to
drm_helper_mode_fill_fb_struct().

v2: Reject fbs with invalid fb->dev (Laurent)

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-19-git-send-email-ville.syrjala@linux.intel.com

We want the fbs inherited from the BIOS to be more or less fully working
prior to actually registering them. This will allow us to just pass the
fb to various helper function instead of having to pass all the
different parameters separately.

Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-18-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We want framebuffers to be mostly useable already before
drm_framebuffer_init() get called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().

Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-17-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We want framebuffers to be mostly useable already before
drm_framebuffer_init() is called, and so we will start demanding that
all the interesting format/size/etc. information be filled in before
drm_framebuffer_init(). drm_helper_mode_fill_fb_struct() will do that
for us, so let's make sure it gets called before drm_framebuffer_init().

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-16-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pass the drm_device to drm_helper_mode_fill_fb_struct() so that we can
populate fb->dev early. Will make it easier to use the fb before we
register it.

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+				     struct drm_device *dev,
				     struct drm_framebuffer *fb,
				     const struct drm_mode_fb_cmd2 *mode_cmd
				     );

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+				     struct drm_device *dev,
				     struct drm_framebuffer *fb,
				     const struct drm_mode_fb_cmd2 *mode_cmd
				     )
{ ... }

@@
function func;
identifier dev;
expression E1, E2;
@@
func(struct drm_device *dev, ...)
{
 ...
 drm_helper_mode_fill_fb_struct(
+				dev,
				E1, E2);
 ...
}

@@
expression E1, E2;
@@
 drm_helper_mode_fill_fb_struct(
+				dev,
				E1, E2);

v2: Rerun spatch due to code changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481748539-18283-1-git-send-email-ville.syrjala@linux.intel.com