Note: This is compile only tested as I have no access to the hw.  This
variable was not used anywhere in the code. Removing it saves 24 bytes.

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-24 (-24)
Function                                     old     new   delta
rxe_qp_state_name                             24       -     -24
Total: Before=3348732, After=3348708, chg -0.00%
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Note: This is compile only tested as I have no access to the hw.
This variable was not used in qib_sdma.c but in qib_iba7322.c. Declaring it
there, as static, saves 56 bytes.

add/remove: 0/2 grow/shrink: 0/0 up/down: 0/-144 (-144)
Function                                     old     new   delta
qib_sdma_state_names                          56       -     -56
qib_sdma_event_names                          88       -     -88
Total: Before=2874565, After=2874421, chg -0.01%
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Note: This is compile only tested as I have no access to the hw.

This variable was not used anywhere in the code. Removing it saves 88
bytes.

add/remove: 0/1 grow/shrink: 0/0 up/down: 0/-88 (-88)
Function                                     old     new   delta
qib_sdma_event_names                          88       -     -88
Total: Before=2874565, After=2874477, chg -0.00%
Signed-off-by: NHernán Gonzalez <hernan@vanguardiasur.com.ar>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Except for a minor log message change, this patch does not change
any functionality. For the introduction of %pIS, see also commit
10679643 ("lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs]
format specifier").
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The caller of srp_ib_lookup_path() is responsible for holding a reference
on the SCSI host. That means that commit 8a0d18c6 was not necessary.
Hence revert it.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Before commit e494f6a7 ("[SCSI] improved eh timeout handler") it
did not really matter whether or not abort handlers like srp_abort()
called .scsi_done() when returning another value than SUCCESS. Since
that commit however this matters. Hence only call .scsi_done() when
returning SUCCESS.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:

In file included from include/linux/kernel.h:11,
                 from include/linux/interrupt.h:6,
                 from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
 #define BIT(nr)   (1UL << (nr))
                        ^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
 #define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
                                  ^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
 #define BNXT_RE_MAX_MR_SIZE  BNXT_RE_MAX_MR_SIZE_HIGH
                              ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
  ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
                         ^~~~~~~~~~~~~~~~~~~

Fixes: 872f3578 ("RDMA/bnxt_re: Add support for MRs with Huge pages")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Building for a 32-bit target results in a couple of warnings from casting
between a 32-bit pointer and a 64-bit integer:

drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq':
drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
    bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle,
                       ^
drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
            (struct bnxt_qplib_srq *)q_handle,
            ^
In file included from include/linux/byteorder/little_endian.h:5,
                 from arch/arm/include/uapi/asm/byteorder.h:22,
                 from include/asm-generic/bitops/le.h:6,
                 from arch/arm/include/asm/bitops.h:342,
                 from include/linux/bitops.h:38,
                 from include/linux/kernel.h:11,
                 from include/linux/interrupt.h:6,
                 from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq':
include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
 #define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
                                           ^
include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64'
 #define cpu_to_le64 __cpu_to_le64
                     ^~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64'
  req.srq_handle = cpu_to_le64(srq);

Using a uintptr_t as an intermediate works on all architectures.

Fixes: 37cb11ac ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Omit an extra message for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Perform QP type check in one place and fail as early as possible.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update .mailmap file to point to my primary open-source
related e-mail address.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Maintaining the uobjects list is mandatory, hoist it into the common
rdma_alloc_commit_uobject() function and inline it as there is now
only one caller.
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Merge tag 'mlx5-updates-2018-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next

mlx5-update-2018-02-23 (IB representors)

From: Mark Bloch <markb@mellanox.com>
=========
Add IB representor when in switchdev mode

The following series adds support for an IB (RAW Ethernet only) device
representor which is created when the user switches to switchdev mode.

Today when switching to switchdev mode the only representors which are
created are net devices. Each netdev is a representor of a virtual
function and any data sent via the representor is received on the virtual
function, and any data sent via the virtual function is received by the
representor.

For the mlx5 driver the main use of this functionality is to be able to
use Open vSwitch on the hypervisor in order to manage/control traffic
from/to the virtual functions. Open vSwitch can also work with  DPDK
devices and not just net devices, this series exposes an IB device, which
Mellanox PMD driver uses, which then can be used by Open vSwitch DPDK.

An IB device representor exposes only RAW Ethernet QP capabilities and
the ability to create flow rules to direct traffic to its RX queues. The
state of the IB device (ACTIVE/DOWN etc..) is based on the state of the
corresponding net device representor. No other RDMA/RoCE functionality is
currently supported and no GID table is exposed.
=========
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When in switchdev mode, there is no need to do self loopback checks
as we can't receive those packets, we insert steering rules to the
eswitch that make sure packets can't be looped back.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Up until this point it wasn't possible to activate IB representors
when switching to switchdev mode, remove this limitation.

We trigger reload of the PF IB interface in order to make sure that
already allocated resources are invalid and new resources will be opened
correctly with all the limitations of switchdev mode applied (only raw
packet capabilities, without RoCE). We also move the remove/add to a
place where the E-Switch mode is set/unset to better control when to
trigger this action, this will allow the IB side to start in the correct
mode.

For better code reuse, create a function which reloads an interface and
export it.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

This commit adds full support for IB representor:

1) Representors profile, We add two new profiles:
   nic_rep_profile - This profile will be used to create an IB device that
   represents the PF/UPLINK.
   rep_profile - This profile will be used to create an IB device that
   represents VFs. Each VF will be its own representor.
2) Proper load/unload callbacks, Those are called by the E-Switch when
   moving to/from switchdev mode.
3) Different flow DB handling for when we in switchdev mode.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In order to forward traffic from representor's SQ to the right virtual
function, every time an SQ is created also add the corresponding flow rule
to the FDB.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When enabling many VFs and switching to switchdev mode, the total amount
of mkeys we try to allocate when loading representors is very large and
may cause timeouts on allocations, the same issues was observed on VFs
and we employ the same fix that was done for them. We avoid allocating
the full MR cache on load but still allow it to be manipulated once the
IB device is loaded.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently in switchdev mode we allow only for raw packet QPs.
Expose the right capabilities and set the gid table length to 0, also
make sure we don't try to enable RoCE, so split the function
to enable RoCE so representors can enable only the notifier needed for
net device events.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Currently we listen to netdev register/unregister event based on PCI
device. When in switchdev mode PF and representors share the same PCI
device, so in order to pair ib device and netdev in switchdev mode
compare the netdev that triggered the event to that of the representor.

Expose a function that lets you receive the netdev associated what
a given representor.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When we point to a representor, it means we are in switchdev mode.
The flow db is shared between PF and virtual function representors
so each rule created needs to have a match on its specific source port.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

A flow DB is a shared resource between PF and representors,
need to allocate it only when creating the PF IB device.
Once we add IB representors, they will use the flow db which was
created by the PF.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Create the basic infrastructure of registering and unregistering
IB representors. The load/unload callbacks are left empty and
proper implementation will be introduced in following patches.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Create a new representor type: REP_IB. which will be initialized by an IB
device that is used as a logical representor of a eswitch vport (VF or
uplink) just like we have a net device today in switchdev mode.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Under switchdev mode we insert an eswitch miss rule causing any
unmatched traffic to be sent towards the PF vport. This miss rule can
be optimized if we break it to two, one case is for multicast traffic and
the other for unicast.

Breaking the miss rule into two (unicast and multicast) allows the firmware
to program the hardware in a more efficient way.

Using ConncetX-5 Ex with IXIA and testpmd (which use IB representors):

IXIA -> NIC -> PF -> IB representor -> NIC -> VF:
    - Without this optimization: 9.2 MPPS.
    - With this optimization: 18 MPPS.

VF -> NIC -> IB representor-> PF -> NIC -> IXIA:
    - Without this optimization: 17 MPPS.
    - With this optimization: 23.4 MPPS.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The max FTE number should be the max number of SQs that can be opened.
Ethernet representors open one SQ each. Once we add IB representor this
will increase (depends on the user). For now lets start with 31
per IB representor and if needed increase in the future.

This increase only affects the number of FTEs in the slow path FDB,
offloaded rules (done via TC on the fast path portion of the FDB)
aren't affected.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

In preparation for IB representors, move representors structs to a global
scope, also expose functions needed for registration, unregistration,
eswitch mode and creating a flow rule to direct traffic from SQs to the
right VF.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Add a callback interface to get a protocol device (per representor type).
The Ethernet representors will expose their netdev via this interface.

This functionality can be later used by IB representor in order to find the
corresponding net device representor.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The proper return error is -EOPNOTSUPP and not -ENOSYS, so update
all places in verbs.c to match this semantics.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Simplify the code by directly checking the availability of extended
command flog instead of doing multiple shift operations.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The internal to kernel variable declarations don't need to be
declared with user types. This patch converts such occurrences
appeared in ib_uverbs_write().
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move all header validation logic to be performed before SRCU read lock.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The SRCU read lock protects the IB device pointer
and doesn't need to be called before copying user
provided header.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

There is no need to take SRCU lock before checking
file->ucontext, so move it do it before it.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The check based on index is not sufficient because

  IB_USER_VERBS_EX_CMD_CREATE_CQ = IB_USER_VERBS_CMD_CREATE_CQ

and IB_USER_VERBS_CMD_CREATE_CQ <= IB_USER_VERBS_CMD_OPEN_QP,
so if we execute IB_USER_VERBS_EX_CMD_CREATE_CQ this code checks
ib_dev->uverbs_cmd_mask not ib_dev->uverbs_ex_cmd_mask.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move all command header processing into separate function
and perform those checks before acquiring SRCU read lock.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The non-existing command is supposed to return -EOPNOTSUPP, but the
current code returns different errors for different flows for the
same failure. This patch unifies those flows.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Command that doesn't exist means that it is not supported,
so update code to return -EOPNOTSUPP in case of failure.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fail as early as possible if not enough header data
was provided.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>