Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

free_netdev finally calls kfree which makes the contents
of ndev and priv (private data contained in ndev) invalid.

So iounmap should be called before free_netdev.

Cc: David S. Miller <davem@davemloft.net>
Cc: Chaithrika U S <chaithrika@ti.com>
Cc: Sriramakrishnan <srk@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IRQ and resource[] may not have correct values until
after PCI hotplug setup occurs at pci_enable_device() time.

The semantic match that finds this problem is as follows:

// <smpl>
@@
identifier x;
identifier request ~= "pci_request.*|pci_resource.*";
@@

(
* x->irq
|
* x->resource
|
* request(x, ...)
)
 ...
*pci_enable_device(x)
// </smpl>
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IRQ and resource[] may not have correct values until
after PCI hotplug setup occurs at pci_enable_device() time.

The semantic match that finds this problem is as follows:

// <smpl>
@@
identifier x;
identifier request ~= "pci_request.*|pci_resource.*";
@@

(
* x->irq
|
* x->resource
|
* request(x, ...)
)
 ...
*pci_enable_device(x)
// </smpl>
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IRQ and resource[] may not have correct values until
after PCI hotplug setup occurs at pci_enable_device() time.

The semantic match that finds this problem is as follows:

// <smpl>
@@
identifier x;
identifier request ~= "pci_request.*|pci_resource.*";
@@

(
* x->irq
|
* x->resource
|
* request(x, ...)
)
 ...
*pci_enable_device(x)
// </smpl>
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits)
  Revert "HID: add support for the Wacom Intuos 4 wireless"
  HID: fix up Kconfig entry for ACRUX driver
  HID: add ACRUX game controller force feedback support
  HID: Force input registration for "VEC footpedal"
  HID: add HID_QUIRK_HIDINPUT_FORCE
  HID: hid-input.c: indentation fixes
  HID: hiddev: use usb_find_interface, get rid of BKL
  HID: ignore digitizer usage Undefined (0x00)
  HID: Add support for Conceptronic CLLRCMCE
  HID: hid-ids.h: Whitespace fixup, align using TABs
  HID: picolcd: implement refcounting of framebuffer
  HID: picolcd: do not reallocate memory on depth change
  HID: picolcd: Add minimal palette required by fbcon on 8bpp
  HID: magicmouse: Correct parsing of large X and Y motions.
  HID: magicmouse: report last touch up
  HID: picolcd: fix deferred_io init/cleanup to fb ordering
  HID: hid-ids.h: keep vendor ids in alphabetical order
  HID: add proper support for Elecom BM084 bluetooth mouse
  HID: magicmouse: enable horizontal scrolling
  HID: magicmouse: add param for scroll speed
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (39 commits)
  random: Reorder struct entropy_store to remove padding on 64bits
  padata: update API documentation
  padata: Remove padata_get_cpumask
  crypto: pcrypt - Update pcrypt cpumask according to the padata cpumask notifier
  crypto: pcrypt - Rename pcrypt_instance
  padata: Pass the padata cpumasks to the cpumask_change_notifier chain
  padata: Rearrange set_cpumask functions
  padata: Rename padata_alloc functions
  crypto: pcrypt - Dont calulate a callback cpu on empty callback cpumask
  padata: Check for valid cpumasks
  padata: Allocate cpumask dependend recources in any case
  padata: Fix cpu index counting
  crypto: geode_aes - Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
  pcrypt: Added sysfs interface to pcrypt
  padata: Added sysfs primitives to padata subsystem
  padata: Make two separate cpumasks
  padata: update documentation
  padata: simplify serialization mechanism
  padata: make padata_do_parallel to return zero on success
  padata: Handle empty padata cpumasks
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: allow limited allocation before slab is online
  percpu: make @dyn_size always mean min dyn_size in first chunk init functions

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits)
  [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions
  [SCSI] zfcp: Introduce experimental support for DIF/DIX
  [SCSI] zfcp: Enable data division support for FCP devices
  [SCSI] zfcp: Prevent access on uninitialized memory.
  [SCSI] zfcp: Post events through FC transport class
  [SCSI] zfcp: Cleanup QDIO attachment and improve processing.
  [SCSI] zfcp: Cleanup function parameters for sbal value.
  [SCSI] zfcp: Use correct width for timer_interval field
  [SCSI] zfcp: Remove SCSI device when removing unit
  [SCSI] zfcp: Use memdup_user and kstrdup
  [SCSI] zfcp: Fix retry after failed "open port" erp action
  [SCSI] zfcp: Fail erp after timeout
  [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback
  [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add
  [SCSI] zfcp: Do not try "forced close" when port is already closed
  [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED
  [SCSI] sd: add support for runtime PM
  [SCSI] implement runtime Power Management
  [SCSI] convert to the new PM framework
  [SCSI] Unify SAM_ and SAM_STAT_ macros
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
  ibft: Use IBFT_SIGN instead of open-coding the search string.
  ibft: convert iscsi_ibft module to iscsi boot lib
  ibft: separate ibft parsing from sysfs interface
  ibft: For UEFI machines actually do scan ACPI for iBFT.
  ibft: Update iBFT handling for v1.03 of the spec.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Minor formatting fix
  amd64_edac: Fix operator precendence error
  edac, mc: Improve scrub rate handling
  amd64_edac: Correct scrub rate setting
  amd64_edac: Fix DCT base address selector
  amd64_edac: Remove polling mechanism
  x86, mce: Notify about corrected events too
  amd64_edac: Remove unneeded defines
  edac: Remove EDAC_DEBUG_VERBOSE
  amd64_edac: Sanitize syndrome extraction

Commit 8f92054e ("CRED: Fix __task_cred()'s lockdep check and banner
comment") fixed the lockdep checks on __task_cred().  This has shown up
a place in the signalling code where a lock should be held - namely that
check_kill_permission() requires its callers to hold the RCU lock.

Fix group_send_sig_info() to get the RCU read lock around its call to
check_kill_permission().

Without this patch, the following warning can occur:

  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  kernel/signal.c:660 invoked rcu_dereference_check() without protection!
  ...
Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

bd_prepare_to_claim() incorrectly allowed multiple attempts for
exclusive open to progress in parallel if the attempting holders are
identical.  This triggered BUG_ON() as reported in the following bug.

  https://bugzilla.kernel.org/show_bug.cgi?id=16393

__bd_abort_claiming() is used to finish claiming blocks and doesn't
work if multiple openers are inside a claiming block.  Allowing
multiple parallel open attempts to continue doesn't gain anything as
those are serialized down in the call chain anyway.  Fix it by always
allowing only single open attempt in a claiming block.

This problem can easily be reproduced by adding a delay after
bd_prepare_to_claim() and attempting to mount two partitions of a
disk.

stable: only applicable to v2.6.35
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The firmware handles '\t' internally, so stop trying to emulate it
(which, incidentally, had a bug in it.)

Fixes a really weird hang at bootup in rcu_bootup_announce, which,
as far as I can tell, is the first printk in the core kernel to use
a tab as the first character.

Cc: stable@kernel.org
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM / Runtime: Add runtime PM statistics (v3)
  PM / Runtime: Make runtime_status attribute not debug-only (v. 2)
  PM: Do not use dynamically allocated objects in pm_wakeup_event()
  PM / Suspend: Fix ordering of calls in suspend error paths
  PM / Hibernate: Fix snapshot error code path
  PM / Hibernate: Fix hibernation_platform_enter()
  pm_qos: Get rid of the allocation in pm_qos_add_request()
  pm_qos: Reimplement using plists
  plist: Add plist_last
  PM: Make it possible to avoid races between wakeup and system sleep
  PNPACPI: Add support for remote wakeup
  PM: describe kernel policy regarding wakeup defaults (v. 2)
  PM / Hibernate: Fix typos in comments in kernel/power/swap.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Remove pointless printk from p4-clockmod.
  [CPUFREQ] Fix section mismatch for powernow_cpu_init in powernow-k7.c
  [CPUFREQ] Fix section mismatch for longhaul_cpu_init.
  [CPUFREQ] Fix section mismatch for longrun_cpu_init.
  [CPUFREQ] powernow-k8: Fix misleading variable naming
  [CPUFREQ] Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
  [CPUFREQ] arch/x86/kernel/cpu/cpufreq: use for_each_pci_dev()
  [CPUFREQ] fix brace coding style issue.
  [CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independent
  [CPUFREQ] acpi-cpufreq: Fix CPU_ANY CPUFREQ_{PRE,POST}CHANGE notification
  [CPUFREQ] ondemand: don't synchronize sample rate unless multiple cpus present
  [CPUFREQ] unexport (un)lock_policy_rwsem* functions
  [CPUFREQ] ondemand: Refactor frequency increase code
  [CPUFREQ] powernow-k8: On load failure, remind the user to enable support in BIOS setup
  [CPUFREQ] powernow-k8: Limit Pstate transition latency check
  [CPUFREQ] Fix PCC driver error path
  [CPUFREQ] fix double freeing in error path of pcc-cpufreq
  [CPUFREQ] pcc driver should check for pcch method before calling _OSC
  [CPUFREQ] fix memory leak in cpufreq_add_dev
  [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"

Manually fix up non-data merge conflict introduced by new calling
conventions for trace_power_start() in commit 6f4f2723 ("x86
cpufreq: Make trace_power_frequency cpufreq driver independent"), which
didn't update the intel_idle native hardware cpuidle driver.

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (88 commits)
  ips driver: make it less chatty
  intel_scu_ipc: fix size field for intel_scu_ipc_command
  intel_scu_ipc: return -EIO for error condition in busy_loop
  intel_scu_ipc: fix data packing of PMIC command on Moorestown
  Clean up command packing on MRST.
  zero the stack buffer before giving random garbage to the SCU
  Fix stack buffer size for IPC writev messages
  intel_scu_ipc: Use the new cpu identification function
  intel_scu_ipc: tidy up unused bits
  Remove indirect read write api support.
  intel_scu_ipc: Support Medfield processors
  intel_scu_ipc: detect CPU type automatically
  x86 plat: limit x86 platform driver menu to X86
  acpi ec_sys: Be more cautious about ec write access
  acpi ec: Fix possible double io port registration
  hp-wmi: acpi_drivers.h is already included through acpi.h two lines below
  hp-wmi: Fix mixing up of and/or directive
  dell-laptop: make dell_laptop_i8042_filter() static
  asus-laptop: fix asus_input_init error path
  msi-wmi: make needlessly global symbols static
  ...

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (198 commits)
  KVM: VMX: Fix host GDT.LIMIT corruption
  KVM: MMU: using __xchg_spte more smarter
  KVM: MMU: cleanup spte set and accssed/dirty tracking
  KVM: MMU: don't atomicly set spte if it's not present
  KVM: MMU: fix page dirty tracking lost while sync page
  KVM: MMU: fix broken page accessed tracking with ept enabled
  KVM: MMU: add missing reserved bits check in speculative path
  KVM: MMU: fix mmu notifier invalidate handler for huge spte
  KVM: x86 emulator: fix xchg instruction emulation
  KVM: x86: Call mask notifiers from pic
  KVM: x86: never re-execute instruction with enabled tdp
  KVM: Document KVM_GET_SUPPORTED_CPUID2 ioctl
  KVM: x86: emulator: inc/dec can have lock prefix
  KVM: MMU: Eliminate redundant temporaries in FNAME(fetch)
  KVM: MMU: Validate all gptes during fetch, not just those used for new pages
  KVM: MMU: Simplify spte fetch() function
  KVM: MMU: Add gpte_valid() helper
  KVM: MMU: Add validate_direct_spte() helper
  KVM: MMU: Add drop_large_spte() helper
  KVM: MMU: Use __set_spte to link shadow pages
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()
  Input: cy8ctmg110 - capacitive touchscreen support
  Input: keyboard - also match braille-only keyboards
  Input: adp5588-keys - export unused GPIO pins
  Input: xpad - add product ID for Hori Fighting Stick EX2
  Input: adxl34x - fix leak and use after free
  Input: samsung-keypad - Add samsung keypad driver
  Input: i8042 - reset keyboard controller wehen resuming from S2R
  Input: synaptics - set min/max for finger width
  Input: synaptics - only report width on hardware that supports it
  Input: evdev - signal that device is writable in evdev_poll()
  Input: mousedev - signal that device is writable in mousedev_poll()
  Input: change input handlers to use bool when possible
  Input: document the MT event slot protocol
  Input: introduce MT event slots
  Input: usbtouchscreen - implement reset_resume
  Input: usbtouchscreen - implement runtime power management
  Input: usbtouchscreen - implement basic suspend/resume
  Input: Add ATMEL QT602240 touchscreen driver
  Input: fix signedness warning in input_set_keycode()
  ...

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits)
  V4L/DVB: sms: Convert IR support to use the Remote Controller core
  V4L/DVB: sms: properly initialize IR phys and IR name
  V4L/DVB: standardize names at rc-dib0700 tables
  V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
  V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
  V4L/DVB: dib0700: properly implement IR change_protocol
  V4L/DVB: dib0700: break keytable into NEC and RC-5 variants
  V4L/DVB: dib0700: avoid bad repeat
  V4L/DVB: Port dib0700 to rc-core
  V4L/DVB: Add a keymap file with dib0700 table
  V4L/DVB: dvb-usb: add support for rc-core mode
  V4L/DVB: dvb-usb: prepare drivers for using rc-core
  V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
  V4L/DVB: rj54n1cb0c: fix a comment in the driver
  V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
  V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
  V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
  V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
  V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
  V4L/DVB: mediabus: fix ambiguous pixel code names
  ...

Merge branch 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6

* 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
  swiotlb: Make swiotlb bookkeeping functions visible in the header file.
  swiotlb: search and replace "int dir" with "enum dma_data_direction dir"
  swiotlb: Make internal bookkeeping functions have 'swiotlb_tbl' prefix.
  swiotlb: add the swiotlb initialization function with iotlb memory
  swiotlb: add swiotlb_tbl_map_single library function

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (90 commits)
  AppArmor: fix build warnings for non-const use of get_task_cred
  selinux: convert the policy type_attr_map to flex_array
  AppArmor: Enable configuring and building of the AppArmor security module
  TOMOYO: Use pathname specified by policy rather than execve()
  AppArmor: update path_truncate method to latest version
  AppArmor: core policy routines
  AppArmor: policy routines for loading and unpacking policy
  AppArmor: mediation of non file objects
  AppArmor: LSM interface, and security module initialization
  AppArmor: Enable configuring and building of the AppArmor security module
  AppArmor: update Maintainer and Documentation
  AppArmor: functions for domain transitions
  AppArmor: file enforcement routines
  AppArmor: userspace interfaces
  AppArmor: dfa match engine
  AppArmor: contexts used in attaching policy to system objects
  AppArmor: basic auditing infrastructure.
  AppArmor: misc. base functions and defines
  TOMOYO: Update version to 2.3.0
  TOMOYO: Fix quota check.
  ...

Conflicts:
	drivers/hid/hid-ids.h

Conflicts:
	drivers/hid/hid-ids.h

Conflicts:
	drivers/hid/hid-ids.h

Conflicts:
	drivers/hid/hid-ids.h

Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NThomas Weber <weber@corscience.de>
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The patch below fixes a typo in a comment.
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

EDAC MC3: CE page 0xc32281, offset 0x8a0, grain 0, syndrome 0x1, row 2, channel 1, label "": amd64_edac
EDAC MC3: CE - no information available: amd64_edacError Overflow

Add the missing space before "Error Overflow" on the second line.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The bitwise AND is of higher precedence, make that explicit.

Cc: <stable@kernel.org> # 34.x
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Marvell 88ec048 is a derivative of its 88e1121r device.  From the programmer's
perspective, the one major difference is the addition of an additional control
bit in Page 2 Register 16 - used to control the padding of odd nibble
preambles.

This patch adds support for this new device, while inheriting as much code as
possible from the existing 88e1121r implementation.
Signed-off-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch addresses an issue seen on 82580 in which the MDICNFG
register will be reset during a single function reset and as a
result we will be unable to communicate with the PHY.  To correct
the issue, added a call to reset_mdicnfg just prior to the first
access of the MDICNFG register in sgnii_uses_mdio.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MAC-PHY interconnect register set on ICH/PCH parts is accessed through
a peephole mechanism by writing an offset to a CSR register.  The offset
for the interconnect's half-duplex control register (which is used in a
jumbo frame workaround for 82579) is incorrect.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a new product ID to the hso driver.
Signed-off-by: NFilip Aben <f.aben@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>