I saw the warning in btrfs_drop_extent_cache where our end is less than our
start while running xfstests 68 in a loop.  This is because we
unconditionally do drop_end = min(end, extent_end) in
__btrfs_drop_extents(), even though we may not have found an extent in the
range we were looking to drop.  So keep track of wether or not we found
something, and if we didn't just use our end.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We do not need to do anything special to freeze or unfreeze, it's all taken
care of by the generic work, and what we currently have is wrong anyway
since we shouldn't be returnning to userspace with mutexes held anyway.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The btree inode has it's own write cache pages so we can remove this write
cache pages hook as it's not used.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We can race when checking wether PagePrivate is set on a page and we
actually have an eb saved in the pages private pointer.  We could have
easily written out this page and released it in the time that we did the
pagevec lookup and actually got around to looking at this page.  So use
mapping->private_lock to ensure we get a consistent view of the
page->private pointer.  This is inline with the alloc and releasepage paths
which use private_lock when manipulating page->private.  Thanks,
Reported-by: NDavid Sterba <dave@jikos.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave Sterba pointed out a sleeping while atomic bug while doing fsync.  This
is because I'm an idiot and didn't realize that rwlock's were spin locks, so
we've been holding this thing while doing allocations and such which is not
good.  This patch fixes this by dropping the write lock before we do
anything heavy and re-acquire it when it is done.  We also need to take a
ref on the em's in case their corresponding pages are evicted and mark them
as being logged so that releasepage does not remove them and doesn't remove
them from our local list.  Thanks,
Reported-by: NDave Sterba <dave@jikos.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

So we start our freeze, somebody comes in and does an fsync() on a file
where we have to commit a transaction for whatever reason, and we will
deadlock because the freeze is waiting on FS_FREEZE people to stop writing
to the file system, but the transaction is waiting for its free space inodes
to be written out, which are in turn waiting on sb_start_intwrite while
trying to write the file extents.  To fix this we'll just skip the
sb_start_intwrite() if we TRANS_JOIN_NOLOCK since we're being waited on by a
transaction commit so we're safe wrt to freeze and this will keep us from
deadlocking.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

nocow_only is now an obsolete argument.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

fs_info->hashers is now an obsolete one.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

There is already an 'add free space' phrase in front of this one, we
needn't to redo it.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

I screwed this up, there is a race between checking if there is a running
transaction and actually starting a transaction in sync where we could race
with a freezer and get ourselves into trouble.  To fix this we need to make
a new join type to only do the try lock on the freeze stuff.  If it fails
we'll return EPERM and just return from sync.  This fixes a hang Liu Bo
reported when running xfstest 68 in a loop.  Thanks,
Reported-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

A subvolume cannot be deleted via rmdir, but the error code ENOTEMPTY
is confusing. Return EPERM instead, as this is not permitted.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

Using for_each_set_bit_from() to simplify the code.

spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>

Developing service cmds needs it.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>

Unnecessary lookup_extent_mapping() is removed because an error is
returned to the caller.
This patch was made based on the advice from Stefan Behrens, thanks.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>

This patch simplifies a little complex error processing in
btree_get_extent().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>

This reverts commit 0885ef5b

After applying the above patch, the performance slowed down because the dirty
page flush can only be done by one task, so revert it.

The following is the test result of sysbench:
	Before		After
	24MB/s		39MB/s
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

Everybody is just making stuff up, and it's just used to see if we really do
need to alloc a chunk, and since we do this when we already know we really
do it's just a waste of space.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

So we have lots of places where we try to preallocate chunks in order to
make sure we have enough space as we make our allocations.  This has
historically meant that we're constantly tweaking when we should allocate a
new chunk, and historically we have gotten this horribly wrong so we way
over allocate either metadata or data.  To try and keep this from happening
we are going to make it so that the block group item insertion is done out
of band at the end of a transaction.  This will allow us to create chunks
even if we are trying to make an allocation for the extent tree.  With this
patch my enospc tests run faster (didn't expect this) and more efficiently
use the disk space (this is what I wanted).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

For immutable bio vecs, I've been auditing and removing bi_idx
references. These were harmless, but removing them will make auditing
easier.

scrub_bio_end_io_worker() was open coding a bio_reset() - but this
doesn't appear to have been needed for anything as right after it does a
bio_put(), and perusing the code it doesn't appear anything else was
holding a reference to the bio.

The other use end_bio_extent_readpage() was just for a pr_debug() -
changed it to something that might be a bit more useful.
Signed-off-by: NKent Overstreet <koverstreet@google.com>
CC: Chris Mason <chris.mason@oracle.com>
CC: Stefan Behrens <sbehrens@giantdisaster.de>

When we wrote some data by compress mode into a btrfs filesystem which was full
of the fragments, the kernel will report:
	BTRFS warning (device xxx): Aborting unused transaction.

The reason is:
We can not find a long enough free space to store the compressed data because
of the fragmentary free space, and the compressed data can not be splited,
so the kernel outputed the above message.

In fact, btrfs can deal with this problem very well: it fall back to
uncompressed IO, split the uncompressed data into small ones, and then
store them into to the fragmentary free space. So we shouldn't output the
above warning message.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

Wade Cline reported a problem where he was getting garbage and warnings when
writing to a preallocated range via O_DIRECT.  This is because we weren't
creating our normal pinned extent_map for the range we were writing to,
which was causing all sorts of issues.  This patch fixes the problem and
makes his testcase much happier.  Thanks,
Reported-by: NWade Cline <clinew@linux.vnet.ibm.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Sage reported the following lockdep backtrace

=====================================
[ BUG: bad unlock balance detected! ]
3.6.0-rc2-ceph-00171-gc7ed62d #1 Not tainted
-------------------------------------
btrfs-cleaner/7607 is trying to release lock (sb_internal) at:
[<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
but there are no more locks to release!

other info that might help us debug this:
1 lock held by btrfs-cleaner/7607:
 #0:  (&fs_info->cleaner_mutex){+.+...}, at: [<ffffffffa003b405>] cleaner_kthread+0x95/0x120 [btrfs]

stack backtrace:
Pid: 7607, comm: btrfs-cleaner Not tainted 3.6.0-rc2-ceph-00171-gc7ed62d #1
Call Trace:
 [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
 [<ffffffff810afa9e>] print_unlock_inbalance_bug+0xfe/0x110
 [<ffffffff810b289e>] lock_release_non_nested+0x1ee/0x310
 [<ffffffff81172f9b>] ? kmem_cache_free+0x7b/0x160
 [<ffffffffa004106c>] ? put_transaction+0x8c/0x130 [btrfs]
 [<ffffffffa00422ae>] ? btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
 [<ffffffff810b2a95>] lock_release+0xd5/0x220
 [<ffffffff81173071>] ? kmem_cache_free+0x151/0x160
 [<ffffffff8117d9ed>] __sb_end_write+0x7d/0x90
 [<ffffffffa00422ae>] btrfs_commit_transaction+0xa6e/0xb20 [btrfs]
 [<ffffffff81079850>] ? __init_waitqueue_head+0x60/0x60
 [<ffffffff81634c6b>] ? _raw_spin_unlock+0x2b/0x40
 [<ffffffffa0042758>] __btrfs_end_transaction+0x368/0x3c0 [btrfs]
 [<ffffffffa0042808>] btrfs_end_transaction_throttle+0x18/0x20 [btrfs]
 [<ffffffffa00318f0>] btrfs_drop_snapshot+0x410/0x600 [btrfs]
 [<ffffffff8132babd>] ? do_raw_spin_unlock+0x5d/0xb0
 [<ffffffffa00430ef>] btrfs_clean_old_snapshots+0xaf/0x150 [btrfs]
 [<ffffffffa003b405>] ? cleaner_kthread+0x95/0x120 [btrfs]
 [<ffffffffa003b419>] cleaner_kthread+0xa9/0x120 [btrfs]
 [<ffffffffa003b370>] ? btrfs_destroy_delayed_refs.isra.102+0x220/0x220 [btrfs]
 [<ffffffff810791ee>] kthread+0xae/0xc0
 [<ffffffff810b379d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff8163e744>] kernel_thread_helper+0x4/0x10
 [<ffffffff81635430>] ? retint_restore_args+0x13/0x13
 [<ffffffff81079140>] ? flush_kthread_work+0x1a0/0x1a0
 [<ffffffff8163e740>] ? gs_change+0x13/0x13

This is because the throttle stuff can commit the transaction, which expects to
be the one stopping the intwrite stuff, but we've already done it in the
__btrfs_end_transaction.  Moving the sb_end_intewrite after this logic makes the
lockdep go away.  Thanks,
Tested-by: NSage Weil <sage@inktank.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This is the change of the kernel side.

Translation of logical to inode used to have an upper limit 4k on
inode container's size, but the limit is not large enough for a data
with a great many of refs, so when resolving logical address,
we can end up with
"ioctl ret=0, bytes_left=0, bytes_missing=19944, cnt=510, missed=2493"

This changes to regard 64k as the upper limit and use vmalloc instead of
kmalloc to get memory more easily.
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

We already have a helper, iterate_inodes_from_logical(), for logical resolve,
so just use it.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

In logical resolve, we parse extent_from_logical()'s 'ret' as a kind of flag.

It is possible to lose our errors because
(-EXXXX & BTRFS_EXTENT_FLAG_TREE_BLOCK) is true.

I'm not sure if it is on purpose, it just looks too hacky if it is.
I'd rather use a real flag and a 'ret' to catch errors.
Acked-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NLiu Bo <liub.liubo@gmail.com>

We've added a new field 'sequence' to delayed ref node, so update related
tracepoints.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

As ref cache has been removed from btrfs, there is no user on
its lock and its check.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

When we delete a inode, we will remove all the delayed items including delayed
inode update, and then truncate all the relative metadata. If there is lots of
metadata, we will end the current transaction, and start a new transaction to
truncate the left metadata. In this way, we will leave a inode item that its
link counter is > 0, and also may leave some directory index items in fs/file tree
after the current transaction ends. In other words, the metadata in this fs/file tree
is inconsistent. If we create a snapshot for this tree now, we will find a inode with
corrupted metadata in the new snapshot, and we won't continue to drop the left metadata,
because its link counter is not 0.

We fix this problem by updating the inode item before the current transaction ends.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

Usecase:

  watch 'grep btrfs < /proc/slabinfo'

easy to watch all caches in one go.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

I noticed I was seeing large lags when running my torrent test in a vm on my
laptop.  While trying to make it lag less I noticed that our overcommit math
was taking into account the number of bytes we wanted to reclaim, not the
number of bytes we actually wanted to allocate, which means we wouldn't
overcommit as often.  This patch fixes the overcommit math and makes
shrink_delalloc() use that logic so that it will stop looping faster.  We
still have pretty high spikes of latency, but the test now takes 3 minutes
less time (about 5% faster).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Mitch reported a problem where you could get an ENOSPC error when untarring
a kernel git tree onto a 16gb file system with compress-force=zlib.  This is
because compression is a huge pain, it will return from ->writepages()
without having actually created any ordered extents.  To get around this we
check to see if the async submit counter is up, and if it is wait until it
drops to 0 before doing our normal ordered wait dance.  With this patch I
can now untar a kernel git tree onto a 16gb file system without getting
ENOSPC errors.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We're going to use this flag EXTENT_DEFRAG to indicate which range
belongs to defragment so that we can implement snapshow-aware defrag:

We set the EXTENT_DEFRAG flag when dirtying the extents that need
defragmented, so later on writeback thread can differentiate between
normal writeback and writeback started by defragmentation.
Original-Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>

ulist_alloc() has the possibility of returning NULL.
So, it is necessary to check the return value.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>

btrfs_iget() never return NULL.
So, NULL check is unnecessary.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>

When we ran fsstress(a program in xfstests), the filesystem hung up when it
is full. It was because the space reserved in btrfs_fallocate() was wrong,
btrfs_fallocate() just used the size of the pre-allocation to reserve the
space, didn't took the block size aligning into account, so the size of
the reserved space was less than the allocated space, it caused the over
reserve problem and made the filesystem hung up when invoking cow_file_range().
Fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

Though we dump the stack information when aborting a unused transaction
handle, we don't know the correct place where we decide to abort the
transaction handle if one function has several place where the transaction
abort function is invoked and jumps to the same place after this call.
And beside that we also don't know the reason why we jump to abort
the current handle. So I modify the transaction abort function and make
it output the function name, line and error information.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

We forget to protect ->log_batch when syncing a file, this patch fix
this problem by atomic operation. And ->log_batch is used to check
if there are parallel sync operations or not, so it is unnecessary to
reset it to 0 after the sync operation of the current log tree complete.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

We should insert/update 6 items(root ref, root backref, dir item, dir index,
root item and parent inode) when creating a snapshot, not 5 items, fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

The snapshot should be the image of the fs tree before it was created,
so the metadata of the snapshot should not exist in the its tree. But now, we
found the directory item and directory name index is in both the snapshot tree
and the fs tree. It introduces some problems and makes the users feel strange:

 # mkfs.btrfs /dev/sda1
 # mount /dev/sda1 /mnt
 # mkdir /mnt/1
 # cd /mnt/1
 # btrfs subvolume snapshot /mnt snap0
 # ls -a /mnt/1/snap0/1
 .	..	[no other file/dir]

 # ll /mnt/1/snap0/
 total 0
 drwxr-xr-x 1 root root 10 Ju1 24 12:11 1
			^^^
			There is no file/dir in it, but it's size is 10

 # cd /mnt/1/snap0/1/snap0
 [Enter a unexisted directory successfully...]

There is nothing in the directory 1 in snap0, but btrfs told the length of
this directory is 10. Beside that, we can enter an unexisted directory, it is
very strange to the users.

 # btrfs subvolume snapshot /mnt/1/snap0 /mnt/snap1
 # ll /mnt/1/snap0/1/
 total 0
 [None]
 # ll /mnt/snap1/1/
 total 0
 drwxr-xr-x 1 root root 0 Ju1 24 12:14 snap0

And the source of snap1 did have any directory in Directory 1, but snap1 have
a snap0, it is different between the source and the snapshot.

So I think we should insert directory item and directory name index and update
the parent inode as the last step of snapshot creation, and do not leave the
useless metadata in the file tree.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>

Sometimes we need choose the method of the reservation according to the type
of the block reservation, such as the reservation for the delayed inode update.
Now we identify the type just by comparing the address of the reservation
variants, it is very ugly if it is a temporary one because we need compare it
with all the common reservation variants. So we add a new "type" field to keep
the type the reservation variants.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>